Description: Our Modbus to Davis VantagePro2 Weather Station Gateway allows you to easily connect your PLC (Programmable Logic Controller), RTU (remote telemetry unit) or SCADA System to a Davis Vantage Pro2 Weather Station. Using the Modbus RTU protocol it enables your programmable controller to monitor and carry out actions based on wind speed, wind direction, temperature etc. Features:
Dimensions in mm: 115W x 90D x 40H (mm)
Please Note: The weather station/console/cables/PLC pictured is not included.
- Connect weather station to Gateway RS232 Com Port 2 Baud rate 19200
- Connect the PLC to Gateway Com port 1.
- PLC Connection can be RS232 or RS485.
- PLC Connection selectable Modbus address 1 to 16.
- selectable baud rate 2400, 4800,9600 or 19200
- selectable parity none, odd, even
- Transfer readings
- Outdoor Temperature
- Outdoor Humidity
- Wind Speed
- Wind Direction
- Rainfall (Precipitation)
- Barometric Pressure
- Indoor Temperature (console)
- Indoor Humidity (console)
- Solar Radiation
- Evaporative Transfer
- Daily Rainfall
- Weekly Rainfall
- Monthly Rainfall
- Communications OK status shows the communications between the weather station and gateway is OK
Dimensions in mm: 115W x 90D x 40H (mm)
Please Note: The weather station/console/cables/PLC pictured is not included.
Example Configurations
Documentation and Downloads
