Modbus to Davis VantagePro2 Weather Stn DIN Rail

(0 review)

SKU : GWY-141
Quantity on Hand : 2
Skill Level : Assembled and Tested

Buy 10, Get 5% Off!
Buy 100, Get 10% Off!


139.00 139.0 USD 139.00


  • WeightMajor
  • WeightMinor

This combination does not exist.

Terms and Conditions


Description: Our Modbus to Davis VantagePro2 Weather Station Gateway allows you to easily connect your PLC (Programmable Logic Controller), RTU (remote telemetry unit) or SCADA System to a Davis Vantage Pro2 Weather Station. Using the Modbus RTU protocol it enables your programmable controller to monitor and carry out actions based on wind speed, wind direction, temperature etc.


  • Connect weather station to Gateway RS232 Com Port 2 Baud rate 19200
  • Connect the PLC to Gateway Com port 1.
  • PLC Connection can be RS232 or RS485.
  • PLC Connection selectable Modbus address 1 to 16.
  • selectable baud rate 2400, 4800,9600 or 19200
  • selectable parity none, odd, even
  • Transfer readings
  • Outdoor Temperature
  • Outdoor Humidity
  • Wind Speed
  • Wind Direction
  • Rainfall (Precipitation)
  • Barometric Pressure
  • Indoor Temperature (console)
  • Indoor Humidity (console)
  • Solar Radiation
  • Evaporative Transfer
  • Daily Rainfall
  • Weekly Rainfall
  • Monthly Rainfall
  • Communications OK status shows the communications between the weather station and gateway is OK
The unit can be screwed to a panel or a clip allows mounting to a DIN rail.

Dimensions in mm: 115W x 90D x 40H (mm)

Please Note: The weather station/console/cables/PLC pictured is not included.

Example Configurations

Odoo CMS - a big picture

Documentation and Downloads