Potentiometer Transmitter 4-20mA Output (TWK-312)
Buy 10, Get 5% Off!
Buy 100, Get 10% Off!
Description: These tiny potentiometer transmitters measure just 52 × 22 × 18 mm. They provide a 2.5 V excitation to your potentiometer and the output of the potentiometer is then converted to a 4 to 20 mA signal.
Span and zero adjustment trimpots can be accessed under rubber plugs on the conditioner's body.
Small size: just 52 × 22 × 18 mm!
Wide input range from 200ohm to 50Kohm
3-wire 4 to 20 mA output (2 metre cable)
Provides a regulated 2.5 V excitation voltage for the potentiometer
Backed with double-sided tape for flexible placement
±0.025% Full scale accuracy
Supply voltage from 10 to 28 VDC
Low cost and high stability
Input 0 to 100% (EXC 2.5V)
|Accuracy:||±0.025 % Full scale|
|Output:||4 to 20 mA|
|Zero adjustment:||±20 % Full scale|
|Span adjustment:||±25 % Full scale|
|Output response Time (0 to 90 %):||50 ms|
|Output ripple:||±0.05 % Full scale|
|Temperature coefficient:||25 ppm/°C|
|Operating temperature:||0 to 60 °C|
|Operating humidity:||20 to 90 % non-condensing|
|Storage temperature:||0 to 70 °C|
|Storage humidity:||20 to 90 % non-condensing|
|Dimensions:||52 × 22 × 18 mm|
|Cable:||2 m, 3 wire|
This unit is the manufacturer part TWK-3I2. The datasheet lists other options, a selection of which we carry. If you're after a combination of options we don't stock, contact us for pricing and availability.
Once the user has seen at least one product this snippet will be visible.
Recently Viewed Products
Documentation and Downloads