Programmable Trip Alarm 4 to 20 mA In, 2 Relay Output

Description: The AXB-055 is an economical programmable process indicator for DIN-rail mounting designed for trip-alarm applications. It is fitted with a 4 to 20 mA input and two relay outputs. It features 3 way 2 kV isolation (input / output 1 / supply), a 5 digit programmable display and pushbuttons to configure the 2 relay on and off levels. The display can be programmed to show the 4 to 20 mA signal in engineering units. The display allows technicians to easily view the input signal and determine if a fault has occurred.

Equipped with a bright 5-digit LED display, this model is especially suitable for measuring and controlling various technological values from -19999 to 99999. The device has 2 programmable relays providing on/off control/alarm. It is suitable for pump control to maintain liquid levels in tanks and wet wells.

Features:

• 0.05% Full scale accuracy
• 4 to 20 mA input
• Programmable display -1999 to 99999
• Wide voltage range (18 to 60 VAC/DC) input power
• Three way, 2 kV isolation
• Mounts onto DIN rail
• 2 Alarm Relay
• High stability
• CE EMC certification
• Dimension 23 × 76 × 96 mm

Specifications:

• Measuring Accuracy: 0.05% Full scale

• Display Range: -19999~99999 with adjustable decimal point

• Analog Output Resolution: 16 bit

• Response Time (0 to 90%): < 250 ms

• Power Supply: 18 to 60 VAC/DC

• Output Drive Capability (maximum): 10 V or 500 Ω

• Output Ripple: <0.1% Full scale

• Temperature Coefficient (0 to 50 °C): 50 ppm/°C

• Display: 5 digit, 6.8 mm tall red LED

• Dielectric Strength: 2.0 kVAC for 1 minute - 1.6 kVDC

• Environmental Operating Range: 0 to 60 °C, 20 to 90% RHT non condensing

• Environmental Storage Range: 0 to 70 °C, 20 to 90% RHT non condensing

• Dimensions: 23 mm wide × 76 mm high × 96 mm deep

• Manufacturer Part: SMATR-E43-20NA