Register | Log In
 
Tools and Meters > Special Meters > 
Your Cart is Empty
View Cart
 
 
Special Meters
ANALOG VOLTAGE PANEL METER 15V DC / 2.4" x 1.9"
tn_avm6015.jpg
Moving coil panel meters for use in electronic instruments, switchboards, vehicles,... With zero adjusting screw. Class 2.5.

Specifications
range: 15V DC
dimensions: 2.4" x 1.9"
(AVM6015)
Read More
  Assembled and Tested  
  AVM6015  
  8  
Quantity:  

ANALOG VOLTAGE PANEL METER 30V DC / 2.8" x 2.4"
tn_avm.jpg
Moving coil panel meters for use in electronic instruments, switchboards, vehicles,... With zero adjusting screw. Class 2.5.

Specifications
* range: 30V DC
* dimensions: 2.8" x 2.4"
Read More
  Assembled and Tested  
  AVM7030  
  3  
Quantity:  

ANALOG CURRENT PANEL METER 3A DC / 2.4" x 1.9"
tn_aim603000.jpg
NEW - LOWER PRICE!
Price was: $7.69

Moving coil panel meters for use in electronic instruments, switchboards, vehicles,... With zero adjusting screw. Class 2.5.

Specifications
range: 3A
dimensions: 2.4" x 1.9"
(AIM603000)
Read More
  Assembled and Tested  
  AIM603000  
  4  
Quantity:  

Digital Environment Meter: °F/dB/LUX/HUM
tn_dvm401.jpg
Specifications:
  • Display: large 3 1/2-digit LCD displays Lux, °C, °F, %RH, dB-A, dB-C, dB-low and dB-high
  • Auto power off
  • Data hold and maximum hold
  • Comes with: 9V-battery and "K-type" temperature probe, humidity probe, photo detector and carrying bag
  • Luxmeter:
  • Ranges: 20.00, 200.0, 2000, 20000Lux (x10 Lux)
  • Resolution: 0.1Lux
  • Temperature measurement:
  • Ranges: -20.0°C ~ 200.0°C, -4.0°F ~ 200.0°F, -20°C ~ 750°C, -4°F ~ 1400°F
  • Resolution: 0.1°C / 0.1°F
  • Humidity meter:
  • Range: 25% ~ 95% RH
  • Resolution: 0.1% RH
  • Sound level meter:
  • Ranges: Lo = 35 ~ 100dB, Hi = 65 ~ 130dB (frequency weighting : A, C)
  • Resolution: 0.1dB
  • Power supply: 9V-battery (incl.)
  • Dimensions:
  • Unit: 9.9" x 2.5" x 1.3"
  • Photo detector: 4.5" x 2.4" x 1.1"
  • Weight:
  • Unit: 11.6 oz.
  • Photo detector: 2.8 oz.
Read More
  Assembled and Tested  
  DVM401  
  1  
Quantity:  

ANEMOMETER
tn_dvm9500.jpg
Features:

wind speed measurements: in mph, km/h or m/s units
wind speed: in Beauford wind scale bar graph
wind chill display
temperature display: in degrees Celsius or Fahrenheit
data-hold function
auto power OFF
LCD backlight
comes with neckband
(DVM9500)
Read More
  Assembled and Tested  
  DVM9500  
  2  
Quantity:  

CABLE TRACKER WITH TONE GENERATOR
tn_vttest11.jpg
Features:
  • network tester:
    • consists of a tone generator and a probe method:
      • use the tone generator and the probe to determine where a cable is going and whether or not (and where) the cable is interrupted
  • signal viewing in 3 modes: lamp (L), speaker (SP) or both (S&L)
  • tone generator output (square waveform):
    • single (900Hz) or dual (900 - 1000Hz)
  • comes with soft carrying bag
Specifications:
  • tone generator
  • working voltage: DC 9V ±15%
  • working current: 10mA (intermittent tone) / 20mA (continuous tone)
  • output wave form: square wave signals ±10Vpp
  • single audio frequency: ± 900Hz
  • dual audio frequency: ± 900Hz - 1000Hz
  • dimensions: 4.5" x 2.4" x 1.1"
  • weight: ± 130g
  • probe
  • working voltage: DC 9V ±15%
  • working current: 25mA (L) / 80mA (max. SP volume) / 100mA (max S&L volume)
  • max. reception sensitivity: > 30mV
  • maximum output volume: ±120dB
  • dimensions: 8.1" x 1.6" x 1.5"
  • weight: ±80g (VTTEST11)
Read More
  Assembled and Tested  
  VTTEST11  
  5  
Quantity:  

LAN TESTER FOR RJ45, RJ12, RJ11, RJ10 & BNC
tn_vtlan3.jpg
NEW - LOWER PRICE!
Price was: $19.99

This LAN tester for different cable types is indispensable in network installation and maintenance. This compact device can be used for testing network and telephone cables (RJ-45, RJ-11 and BNC). It can test most types of telephone and computer cables.

 
Features:

LED indication
advanced design for easy testing
BNC adapter for testing BNC cables
ability to test cables from a distance and in places that are not easily accessible
automatically runs all tests and checks for continuity, open, shorted and crossed wire pairs
 

Specifications:

tests: RJ-45, 10 Base-T, Token Ring, RJ11/12 USOC & coaxial BNC cables
power supply: 9V-battery (not incl.)
 
(VTLAN3)
Read More
  Assembled and Tested  
  VTLAN3  
  12  
Quantity:  

VELLEMAN POCKET BATTERY TESTER
tn_battest.jpg
Features

for AAA (LR3), AA (LR6), C (LR14), D (LR20), E-block (9V) and button cell batteries / blister packed
(BATTEST)
Read More
  Assembled and Tested  
  BATTEST  
  6  
Quantity:  

DIGITAL VOLTAGE TESTER - WITH LCD
tn_vttest2.jpg
Specifications:
  • voltage tester (AC or DC) between 12V and 220V
  • grounding test and testing of broken lines with LCD display
  • size: 135mm (VTTEST2)
Read More
  Assembled and Tested  
  VTTEST2  
  30  
Quantity:  

LAMP CHECKER
tn_vttest8.jpg
Features:
  • for lamps with one of the following fittings:
    • G13, B15d/G5, G4/GU5.3/GY6.35, E27, E14, E10
  • "beep"-signal confirms that lamp functions normally
Specifications:
  • power supply: 9V battery (incl.) (VTTEST8)
Read More
  Assembled and Tested  
  VTTEST8  
  3  
Quantity:  

DETECTOR FOR LIVE WIRING AND METAL AND WOODEN STUDS
tn_vtmvs2.jpg
This detector uses electronic signals to locate the exact position of studs, ceiling joist AC wires and metal through drywall, concrete and other common wall materials. Once the edge of a stud has been detected, the VTMVS2 emits audio and visual signals (LED display) that allows you to easily pinpoint its center position. Utilising the procedure of scanning and marking from two sides, the VTMVS2 will find the center of wood or metal studs or live wires through 3/4 inch surfaces with 1/8 inch accuracy. 

Specifications:

power supply: 1 x 9V battery (not incl.)
water-resistant
operating temperature: -10°C to +50°C
dimensions: 223 x 92 x 45mm
weight (with battery): 250g  (VTMVS2)
Read More
  Assembled and Tested  
  VTMVS2  
  4  
Quantity:  

LAN TESTER FOR RJ45, RJ12, RJ11, RJ10
tn_vtlan4.jpg
This LAN tester for different cable types is indispensable in network installation and maintenance activities. This compact device can be used for testing network or telephone cables (RJ-45, RJ-11,12) and for most types of computer cables. (VTLAN4)
Read More
  Assembled and Tested  
  VTLAN4  
  3  
Quantity:  

COUNTER FOR MINI IR SECURITY SYSTEM PEM7D
tn_pem7d-c.jpg
sensing type: counter for access control system PEM7D
applications: garage door, entrance, supermarket, restaurant, warehouse, ...
contents:
  one 4-digit counter
  one cable (10m) to connect the speaker output of the PEM7D with the input of the 4-digit   counter     
  PEM7D/C
  one mounting bracket (black finish) and mounting screws
  manual (PEM7D/C)
Read More
  Assembled and Tested  
  PEM7D/C  
  3  
Quantity:  

ANALOGUE SOUND LEVEL METER
tn_avm2050.jpg
Features:
7 sound level ranges: 50 to 126dB
A and C weighting: for sound analyses
fast/slow response: allows intermediate and high level measurements
with battery level indication
RCA output jack
(AVM2050)
Read More
  Assembled and Tested  
  AVM2050  
  1  
Quantity:  

ULTRASONIC DISTANCE METER WITH LASER
tn_vtsusd2.jpg
Features
LCD with digits 12mm
also calculates the area and the content
laser pointer for increased accuracy
Specifications
range: 91cm (3ft) to 18.28m (60ft)
accuracy : ± 0.5% (1 digit)
power supply: 1 x 9V (6LR61C or E-block) (not incl.)
dimensions: 73 x 148mm
weight: 150g
laser:
1 mW class 2
range: 40m
wavelength: 670nm
(VTUSD2)
Read More
  Assembled and Tested  
  VTUSD2  
  2  
Quantity:  

PARKING SENSOR SYSTEM WITH LCD DISPLAY AND 4 SENSORS
tn_spbs4.jpg

Features:


  • detection of obstacles when the vehicle is put into reverse
  • beeps accelerate as the vehicle approaches the obstruction
  • long detecting distance: up to 8.20ft., high stability
  • stable LCD display with adjustable built-in buzzer, showing accurate distance to and direction of obstacles
  • 4 black waterproof build-in sensors with a large beam angle for a minimized blind area
  • installation height: 1.6' x 2.6'
  • consists of:
    • 1 electronic control unit with 0.24" power cable
    • digital LCD display with built-in buzzer & ± 20ft. cable
    • 4 ultrasonic sensors with ± 8ft. cable
    • accessories: user's manual, double-sided adhesive tape, 2 quick-on cable clips and hole saw
Read More
  Assembled and Tested  
  SPBS4  
  1  
Quantity:  

AUDIO CABLE TESTER - 10 WAY
tn_vttest15.jpg
Features:
  • enables quick and convenient continuity cable testing for all types of audio cables
  • suited for the following connectors and their combinations:
    • 6.3mm jack
    • 3.5mm jack
    • XLR 3P (M/F)
    • XLR 5P (M/F)
    • phono / RCA
    • banana plug
    • Speakon® 8P
    • Speakon® 4P
    • DIN 3P / 5P / 7P / 8P
    • 5-pin mini DIN
  • LEDs confirm each conductor connection
  • 9-way switch for selecting connections to be tested
  • battery check function
  • rugged, compact, metal construction for ultimate road-worthiness, long life and reliability
  • includes one pair of probes
Specifications:
  • power supply: 1 x E-block 9V 6LR61C (included)
  • dimensions: 7 31/64" x 2 23/64" x 4 21/64"
  • weight: 2.2 lbs
Read More
  Assembled and Tested  
  VTTEST15  
  2  
Quantity:  

INFRARED THERMOMETER (-31°F ~ 689°F / -35°C ~ 365°C)
tn_dvm439.jpg

Features
laser sight technology
temperature readout in °C or °F
large LCD display with amber backlight
real-time maximum temperature reading
last measurement memory recall by pressing °C/°F key while powered off
auto power-off function
Specifications
measurement range: -35°C ~ 365°C (-31°F ~ 689°F)
operating temperature: -10°C ~ 50°C (32°F ~ 122°F)
storage temperature: -20°C ~ 65°C (-4°F ~ 149°F)
accuracy (Tobj = 15°C ~ 35°C,Tamb = 25°C): ± 1.5°C (2.7°F)
accuracy (Tamb = 23°C ~ 25°C):
Tobj = 0°C ~ 365°C: ± 2.5% of rdg + 2 digits
Tobj = -35°C ~ 0°C: ± (2.5°C + 0.05/degree)
resolution (-9.9°C ~ 199.9°C): 0.2°C/0.5°F
response time (90%): 1 sec
emissivity range: 0.95 fixed
wavelength: 5µm - 14µm
auto switching-off: 15 sec
distance-to-spot ratio: D/S = 8:1
power supply: 2 X 1.5V AAA batteries (incl.)
dimensions: 6 13/16" x 1 27/64" x 2 51/64"
weight: 5.3 oz
Read More
  Assembled and Tested  
  DVM439  
  1  
Quantity:  

Analog Panel Meter - 0 to 5 VDC
Click here for specs, downloads &/or more pictures...
Description: This analog panel meter measures DC voltage from 0-5 volts with 2.5% accuracy. It has a clear and easy to read scale and an adjustable dial. These come in handy for measuring the output of sensors with 5V ranges.

The face of the meter is 45x45mm overall. The mounting hole should be 38mm. The overall depth of the meter is 35mm.
Read More
  Assembled and Tested  
  TOL10285  
  4  
Quantity: