Your Cart is Empty
View Cart
Function Generators & Counters
1MHz Pocket Function Generator
Click here for specs, downloads and more pictures.
Description: A complete function generator in pocket format! Now you can take test signals on the move; 3 waveforms can be selected. Set the output voltage or frequency and select signal waveform using the on the screen menu. A powerful sweep function is also included.

  • DDS type generator (Direct Digital Synthesis)
  • DAC resolution: 10 bits
  • Frequency range: from 1Hz to 1,000,000Hz (± 0.01%)
  • Frequency steps: 1Hz, 10Hz, 100Hz, 1kHz and 10kHz
  • Waveforms: sine, square and triangle
  • Sweep function with bi-direction option
  • Output voltage: max. 8Vpp
  • Real output level measurement: dBm / Vrms or Vpp readout (±3%)
  • Typical sine wave distortion (THD): < 0.1% @ 0dB / 600 ohms
  • Square wave rise/fall time: typ. 0.2µs
  • Output impedance: 50 ohms
  • Multi-language menu (Eng / Fre / Dut / Ge / Es )
  • White LED backlight
  • Charging power supply: 9Vdc/200mA
  • Operates on NiMH rechargeable battery pack (included)
  • Dimensions: 2.9 x 4.5 x 1.14"
  • Handheld Pocket Generator
  • Getting started manual
  • BNC adapter, BNC male to RCA female
  • BNC male to 2x 4mm banana plug
  • USB power supply adaptor
Read More
  Assembled and Tested  

Click here for detailed specs.

The PCGU1000 is a digital function generator which can be connected with a PC via USB.
Standard signal waves like e.g. sine, triangle and rectangle are available; other sine waves can be easily created.
The signal waves are created in the PC and produced by the function generator via DDS (Direct Digital wave Systhesis).
Frequencies up to 2MHz.
Features 2 equal outputs and a TTL Sync output.
Output voltage of 1mVtt up to 10Vtt at 600 ohms.
All outputs are galvanically separated from the PC in order to avoid measuring problems. Comes with power adapter.
in the box:
* USB function generator
* getting started manual
* software on CD
* USB cable
* worldwide charging adapt


frequency range: from 0.01Hz to 2MHz
crystal-based stability
outputs are galvanically isolated from the PC
low sine wave distortion
two parallel output connectors for waveforms
TTL-level synchronization output
stores up to 8192 of waveform points
standard waveforms: sine, square and triangle
predefined library waveforms included: noise, sweep, ...
you can create your own waveforms with the integrated signal wave editor
sweep frequency range 0.0001Hz to 25MHz
sweep time 1ms to 10 hours
noise mode bandwidth 25MHz
extended bode plot option together with PC scope
automated wave sequence generation, using file or computer RS232 input.
DLL available for custom software development

Read More
  Assembled and Tested  

Click here for detailed specs.
Price was: $199.00

function generator:
crystal-based stability
standard waveforms: sine, square and triangle
predefined library waveforms included: sine(x)/x, DCV, sweep, ...
auto set-up function and X10 option
pre-trigger function
readouts: True RMS, dBV, dBm, p to p, Duty cycle, Frequency…
transient recorder:
automatic storage of data
automatic recording for more than 1 year
record and display of screens
bode Plotter:
automated sync between oscilloscope and generator
logatithmic scale option
Volt or dB display scale
phase plot option
spectrum analyser:
linear or logarithmic timescale
operating principle: FFT (Fast Fourier Transform)
FFT input channel: CH1 or CH2
zoom function
Read More