logo200.jpg
  Register   Log In 
Welcome My Account Shopping Cart Contact Us Specials New Products Kits and Modules Components Consumer & PC Tools and Meters Security Software Books
 Welcome >  Returning Customers
click here to log in.
Shopping Cart
Your Cart is Empty
View Cart
 
 
50 second USB recording module
C-Cam2AX cmos Camera Module, B/W, EIA
KC7783 PIR Detector Module (Assem and tested)
C-Cam8A-6016IR miniature cmos camera, color NTSC
INTERVAL TIMER (Assembled)
USB CONTROLLED DMX INTERFACE (assembled)
LOW-COST SOLDERING STATION 50W 374-896°F
10 Sec Recording Module in white case with 3 section slide switch
C328-2225BW JPEG Compression VGA Camera Module
Recording Module 20 second - card type
ELECTRONIC CANDLE
Serial Isolated I/O Module (Assembled & Tested)
MINI 3 1/2 DIGIT DMM - 19 RANGES
Gift Certificate
20 Second recording module with 9V battery Connector
5mm White water clear LED 3.5V 11,000 mcd
PERSONAL SCOPE 10MS/s
DVR623 - DSC / DV module for Hobbyist
HANDHELD PERSONAL SCOPE WITH USB
SUPER STEREO EAR KIT

20 second voice recorder/playback module (A93010/A96010)

Click here for A96010 Data Sheet

Click here for A93010 Data Sheet

(MD930100)

da63.jpg
PLEASE NOTE: A96010 or A93010 is supplied depending on availability. Currently only A93010 is available and is the one that is been sold. A96010 is not currently available. The small size is because the IC is in Chip-on-board form. One button is pushed down to record the message. The electret microphone is on the board. The LED turns on during this time. The other button just has to be momentarily pressed to replay the message. A second momentary press during playback will stop the playback. Sampling rate is 4K. All you have to add is the speaker (not included) and 5V DC power (not included). The record play time is determined by the 52K resistor. If you change it to 89K you will get 30 seconds but at a reduced sampling rate. Operating current 25mA. Standby current 10 uA. Size: 34 x 23 x 11 mm. The module comes supplied as you see it in the photo.

OPTIONAL ITEMS (Not included):
2 x (BB089) connector cable to connect the voice recorder to a speaker and power source.
1 x (PB244) Speaker
1 x Battery holder that can hold either 4 x AAA or 4 x AA or 4 x C or 4 x D cells. See our battery holders.

(A96010 & A93010)
 
Quantity
Price
1 – 9$6.60
10 – 99$5.95
100 – 999$4.95
1000 +$3.95

  (Assembled and Tested)  
  A96010  
  128  
 
 
Tell a Friend
 
tn_bb089.jpg
2pin connector cable (8 inch)
 
BB089
Quantity
Price
1 – 9$0.33
10 – 99$0.29
100 +$0.24

  (Component or Part)  
  BB089  
  128  
 
..........................
tn_pb240.jpg
40mm (1.6in) metal housing mylar speaker 0.25W
 

40mm (1.6in) metal housing mylar speaker 0.25W
Specifications:
- 0.25W
- 40mm (1.57in)
- 16 Ohm
- RoHS Compliant
- Includes 5 inch wires already soldered to contacts of the speaker.
Quantity
Price
1 – 9$0.61
10 – 99$0.51
100 – 999$0.46
1000 +$0.39

  (Component or Part)  
  PB240  
  1632  
 
..........................
tn_pb244.jpg
Speaker Round 3 inch 8 ohm 1 watt
 
Diameter: 76mm (3 inch)
1 Watt
8 Ohm
Quantity
Price
1 – 9$3.65
10 – 99$3.46
100 +$3.17

  (Component or Part)  
  PB244  
  75  
 
..........................
tn_da63.jpg
A96010 kit (A96010 with wires and speaker included)
 
PLEASE NOTE: A96010 or A93010 is supplied depending on availability. Currently only A93010 is available and is the one that is been sold. A96010 is not currently available. The small size is because the IC is in Chip-on-board form. One button is pushed down to record the message. The electret microphone is on the board. The LED turns on during this time. The other button just has to be momentarily pressed to replay the message. A second momentary press during playback will stop the playback. Sampling rate is 4K. All you have to add is 5V DC power (not included). The record play time is determined by the 52K resistor. If you change it to 89K you will get 30 seconds but at a reduced sampling rate. Operating current 25mA. Standby current 10 uA. Size: 34 x 23 x 11 mm.

This is a kit which include the following items:
1 x A96010 voice recording module (20 second message)
2 x Connector cable to connect the voice recorder to a speaker and power source.
1 x 1watt 3inch 8ohm Speaker
(you will need to connect the connector cables to the speaker and a power supply preferably by soldering)

Not included:
1 x Battery holder that can hold either 4 x AAA or 4 x AA or 4 x C or 4 x D cells. See our battery holders.
Quantity
Price
1 – 9$9.12
10 – 99$8.64
100 +$7.92

  (Partially Assembled)  
  A96010-kit  
  64  
 
..........................
tn_a96020.jpg
Voice Recording Module 2 x 20sec sections
 
The A96020 voice recording module offers true single chip solid state storage capability and requires no software or micro-controller support. It provides high quality recording and playback with dual 20 second message. Sampling rate is 3.2K. Size: 34 x 23 x 11 mm. All you need to do is add a speaker (not included) and 5V DC Power (not included). Features - Non volatile flash memory technology - No battery back up required - User friendly, easy to operate - Slide switch for record or play back - Separate key to trigger message 1 or 2 - Low power consumption - LED to indicate recording and playback - Built-in condenser mic - Automatic power down - 5-6V Operation.

OPTIONAL ITEMS (Not included):
2 x (BB089) connector cable to connect the voice recorder to a speaker and power source.
1 x (PB244) Speaker
1 x Battery holder that can hold either 4 x AAA or 4 x AA or 4 x C or 4 x D cells. See our battery holders.

(A96020)
Quantity
Price
1 – 9$8.89
10 – 99$8.42
100 – 999$7.72
1000 +$4.95

  (Assembled and Tested)  
  A96020  
  73  
 
..........................
tn_a96020.jpg
A96020 kit (A96020 with wires and speaker included)
 
The A96020 voice recording module offers true single chip solid state storage capability and requires no software or micro-controller support. It provides high quality recording and playback with dual 20 second message. Sampling rate is 3.2K. Size: 34 x 23 x 11 mm. All you need to do is add a 5V DC Power supply (not included).

Features
- Non volatile flash memory technology
- No battery back up required
- User friendly, easy to operate
- Slide switch for record or play back
- Separate key to trigger message 1 or 2
- Low power consumption
- LED to indicate recording and playback
- Built-in condenser mic
- Automatic power down
- 5-6V Operation.

This is a kit which include the following items:
1 x A96020 voice recording module with 2 x 20 second messages
2 x Connector cable to connect the voice recorder to a speaker and power source.
1 x 1watt 3inch 8ohm Speaker
(you will need to connect the connector cables to the speaker and a power supply preferably by soldering)

Not Included:
1 x Battery holder that can hold either 4 x AAA or 4 x AA or 4 x C or 4 x D cells. See our battery holders.
Quantity
Price
1 – 9$12.08
10 – 99$11.45
100 +$10.49

  (Partially Assembled)  
  A96020-kit  
  64  
 
..........................
tn_brm06m.jpg
10 Sec Recording Module in white case with 3 section slide switch
 
Ideal for plush toy, or any kind of talking toys. 
Message retained when batteries are removed.
Built-in microphone and LED recording indicator.
Message is retained when batteries are removed.
40mm (1.6") Mylar speaker
Sound output of more than 85dB at 10cm (3.9") distance (surrounding at 60dB).

Operation:
Record: Slide the switch to the "REC" position. Press and hold the top of the housing. While the LED recording indicator is on, speaks to the built-in microphone about 8-10cm away with a normal speaking volume. Release the top to end recording. (Recording automatic stops when memory is full.)
Play: Slide the switch to the "PLAY" position, and press the top of the housing to play.

3 x AG13 (LR44) batteries (included)
Size: 45mm (1.8") (diam.) x 27mm (1.1") (height)
Weight: 26 g / 0.9 oz (battery included)
Quantity
Price
1 – 9$3.80
10 – 99$3.60
100 – 999$3.30
1000 +$2.95

  (Assembled and Tested)  
  BRM06N  
  1573  
 
..........................
tn_usb2m.jpg
50 second USB recording module  (Out of Stock)
 
This module plugs directly into the USB port of your PC. Then use the free software to record up to 50 seconds of mp3 or wav file to this module. Comes with batteries and speaker ready for use.

Features
Up to 50 seconds of re-recordable voice message (8K sample rate)
Use USB type-A male connector for direct plug into USB port of PC (USB1.1)
Easy to transfer software for windows of MP3 or WAV audio file.
Choice of 8K or 12K sample rate.
50 seconds non-volatile recordable IC.
Operating Voltage 4.5V (3 x AG10 batteries included)
Operating Current < 50 mA
Standby Current < 5 uA
Push switch for playback / stop
Speaker 40mm metal housing mylar speaker (included)

Dimensions:
Main board: Excluding USB connector: 1.7" x 1.13"
                     Including USB connector: 2.25" x 1.13"
Battery board: 2.25" x 0.8"
speaker:      1.6" (diameter)

CURRENTLY OUT OF STOCK. NEW STOCK TO ARRIVE AT END OF SEPTEMBER.
Quantity
Price
1 – 9$11.95
10 – 99$10.50
100 – 999$9.71
1000 +$8.95

  (Assembled and Tested)  
  USB2M  
  0  
 
..........................
tn_ct94.jpg
Recording Module 20 second - card type
 
20 second card type recording unit. This module can be pasted (self-adhesive backing) into birthday cards, Christmas cards etc. When the card is opened your message will be played. You can record your own custom 20 second message with the built in microphone. The module is pre wired with a speaker and battery. All that is left for you to do is to record a message, past the module in your card and remove the little plastic tubing from the metal strip that protects the battery from running down when shipped from the factory.
Product Information

Description 20 second recording card module
Size Length : 105mm, Width : 65mm, Height: 6.4mm (4.1"x 2.6" x 0.25")
Accessories Battery Insulator, Battery G10 3pcs, Speaker 40mm (1.6")
Function Record & Play back
Operation Record : Press switch. Play back : Open the card.
Length of record 20 seconds
RoHS compliant: YES
Quantity
Price
1 – 9$6.84
10 – 99$6.48
100 +$5.94

  (Assembled and Tested)  
  CT94R  
  746  
 
..........................
tn_cps188.jpg
40 second Non-volatile multi message recorder kit
 
Non-volatile multi message recorder using ISD chips. Just change one resistor for longer duration. Standalone operation using just six onboard bottons. Record via built-in microphone or external line in. Speaker and line out connector. SPI interface. 8-24 VDC.
Please note: Speaker not included.
(CPS188)
Quantity
Price
1 – 9$32.95
10 – 99$30.60
100 +$29.58

  (Kit - Basic Soldering Required)  
  CPS188  
  10  
 
..........................
tn_cps189.jpg
120 second Non-volatile multi message recorder kit
 
Non-volatile multi message recorder using ISD chips. Just change one resistor for longer duration. Standalone operation using just six onboard bottons. Record via built-in microphone or external line in. Speaker and line out connector. SPI interface. 8-24 VDC.

Please note: Speaker not included.

 (CPS189)
Quantity
Price
1 – 9$35.37
10 – 99$32.85
100 +$31.76

  (Kit - Basic Soldering Required)  
  CPS189  
  7  
 
 
tn_bb043.jpg
KC7786 PIR sensor module 12v (3pin .1in)
 
This is a fully assembled and tested miniature PIR module (KC7786 with KC778B COB IC) with only 3 connections: Power, Ground & Output (3 pin terminal of standard 0.1 inch pitch). Rated for 12VDC input power. Uses RE200B PIR sensor. Output is an active high pulse of approx. 0.5 seconds and remains active as long as there is motion. Range up to 10 feet. PCB size: 27mm x 27mm (BB043)
Quantity
Price
1 – 9$11.35
10 – 99$9.95
100 – 999$8.95
1000 – 9999$8.15
10000 +$7.45

  (Component or Part)  
  BB043  
  143  
 
..........................
tn_bap3.jpg
Electronic projects 3
 
Three circuits are explained, a 555 Timer, 555 Oscillator with Light Dependent Resistor (LDR) and a light/dark switch using a LDR and 555 IC. The working of a 555 IC is also discussed. (VB052)
Quantity
Price
1 – 9$0.09
10 – 99$0.08
100 +$0.07

  (Book)  
  VB052  
  27  
 
..........................
tn_bap4.jpg
Electronic projects 4
 
In this newsletter three circuits are explained: a 555 LED flasher, a running light effect using the 4017B and 555 micro chip and an electrodice. (VB054)
Quantity
Price
1 – 9$0.09
10 – 99$0.08
100 +$0.07

  (Book)  
  VB054  
  40  
 
..........................
tn_bap5.jpg
Electronic projects 5
 
In this circuit a LM358 IC is used to form two oscillators. The one has a low frequency (1Hz) while the other oscillators at a high frequency (1KHz). The low frequency socillator modules the high frequency to form a two tone siren. (VB056)
Quantity
Price
1 – 9$0.09
10 – 99$0.08
100 +$0.07

  (Book)  
  VB056  
  47  
 
..........................
cam2ani.gif
C-Cam2AX cmos Camera Module, B/W, EIA
 
16mm square (0.63" square) by 15mm (0.59") high. 5V, low cost, low power and very small! Only 5 pins needs to be connected. Power Supply, 5V +/- 0.5V. Voltage regulated circuit essential. Sensor used: OV5116
(BB004)
Quantity
Price
1 – 9$18.48
10 – 99$17.95
100 – 999$16.95
1000 +$15.95

  (Assembled and Tested)  
  BB004  
  33  
 
..........................
Fresnel lens only (for KC7786)
 
(BB052)
Quantity
Price
1 – 9$0.81
10 – 99$0.65
100 – 999$0.55
1000 +$0.47

  (Component or Part)  
  BB052  
  88  
 
..........................
KC778B Pir Controller Chip PDIP
 
(BB053)
Quantity
Price
1 – 9$3.75
10 – 99$2.95
100 – 999$2.65
1000 +$2.45

  (Component or Part)  
  BB053  
  20  
 
..........................
tn_bap2.jpg
Electronic projects 2
 
Two circuits are explained, the first one is a transistor flip-flop circuit with 2 flashing LED's and the second is a coorination test game that uses a thyristor to demonstrate circuit switching. (VB049)
Quantity
Price
1 – 9$0.09
10 – 99$0.08
100 +$0.07

  (Book)  
  VB049  
  88  
 
..........................
tn_bap6.jpg
Electronic projects 6
 
Two circuits are described in this newsletter: a sound switch and a zener diode regulated power supply. (VB058)
Quantity
Price
1 – 9$0.09
10 – 99$0.08
100 +$0.07

  (Book)  
  VB058  
  53  
 
This web store and web site powered by NetSuite ecommerce software