Radio

Shopping Cart

	Your Cart is Empty
	View Cart

Radio

Rolling Code 2-Channel UHF Remote Contro

This kit is a 2-channel version of CPS180, our 4-channel UHF Remote Control kit. We have simply removed two of the 4 channels from CPS180 and used a 2-button Transmitter unit. Up to 100' range. Up to 15 Transmitter units can be learnt by one Rx unit. (only 1 transmitter included). Although these relays are rated 12A/250VAC the PCB tracks will not carry that current. Please do not put more than 2A through these tracks. If you want to switch higher currect loads then you must jumper some wire between the terminal block pins and the relay pins. Receiver PCB size: L 3.32" x W 2.38" x H 0.88". (CPS157)

Quantity	Price
1 – 9	$48.45
10 – 99	$45.00
100 – 999	$43.50
1000 +	$37.95

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS157
Quantity Available:		3

Rolling Code 4-Channel UHF Remote (partially assembled)

State of the Art, with 4 channels either momentary or latching. Range up to 100'. Up to 15 transmitters can be learned by one receiver. (Includes 1 transmitter) 2 indicator LED's. PCB size: 3 3/8" x 3 1/16" 12VDC 6mA (at rest)(CPA180)

PLEASE NOTE: This is a partially assembled product. The daughter board must still be soldered onto the mother board. 13 solder points. Estimated time to finish: 5 minutes.

Quantity	Price
1 – 9	$69.77
10 – 99	$64.80
100 +	$62.64

Skill Level of Item:		(Partially Assembled)
Product #		CPA180
Quantity Available:		11

Rolling Code 4-Channel UHF Remote contro

State of the Art, with 4 channels either momentary or latching. Range up to 100'. Up to 15 transmitters can be learnt by one receiver. (includes 1 Transmitter) 2 indicator LED's. PCB size: 3 3/8" x 3 1/16" 12VDC 6mA (at rest)(CPS180)

Quantity	Price
1 – 9	$54.26
10 – 99	$50.40
100 +	$48.72

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS180
Quantity Available:		9

UHF 434MHz Automicro 4 button (Transmitter only)

(DA16TX)

Quantity	Price
1 – 9	$21.32
10 – 99	$19.80
100 +	$19.14

Skill Level of Item:		(Assembled and Tested)
Product #		DA16TX
Quantity Available:		7

UHF 434MHz Automicro Receiver only

Processes the received signal via a bandpass filter, amplifier and Schmitt trigger. Its output delivers a digital pulse train to the decoder IC. Please note that the receiver module must be built into a circuit by the user. It does nothing as supplied here. PCB size: 47mm x 16mm (1.85inch x 0.63inch)(DA16RX)

Quantity	Price
1 – 9	$19.61
10 – 99	$18.58
100 +	$17.03

Skill Level of Item:		(Assembled and Tested)
Product #		DA16RX
Quantity Available:		7

Rolling Code 10-Channel UHF remote control

This kit is based on the cps180 (rolling code 4 channel remote control). It uses the same 4 button remote control, but you will see that 10 keypress combinations are actually supported – the 4 single buttons and 6 two keypress
combinations. This kit takes uses all 10 keypress combinations to operate 10 relays. The 12V relays can switch 120VAC at 1 Amp. Range up to 100'. Up to 15 transmitters can be learnt by one receiver. (includes 1 Transmitter)
(CPS181)

Quantity	Price
1 – 9	$71.71
10 – 99	$66.60
100 +	$64.38

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS181
Quantity Available:		3

Portible FM Radio (Speaker not incl) kit

This small high quality FM receiver is built around the TDA7000 IC. The TDA7000 consists of a local-oscillator and a mixer, a two stage i.f. filter followed by an I.f. limiter/amplifier, a quadrature f.m. demodulator and an audio muting circuit controlled by the I.f. waveform correlator. In a conventional portable radio, limiting at a low r.f. input level would cause instability because of higher harmonics of the clipped I.f. signal would be radiated to the aerial. With the low I.f. of 70kHz as used in the TDA7000, the radiation is negligible. The audio signal is amplified to about 1 watt by the U2822B amplifier.
Requires a speaker.
(MB090)

Quantity	Price
1 – 9	$22.72
10 – 99	$21.10
100 +	$20.40

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		MB090
Quantity Available:		3

One Chip AM Radio

Complete AM radio on a PCB. Tuned radio frequency front-end, single chip RF amplifier & detector and two stages of amplification of the audio signal into a speaker. All components supplied. Coil prewound. Excellent for schools.(CPS63)

Quantity	Price
1 – 9	$13.68
10 – 99	$12.96
100 +	$11.88

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS63
Quantity Available:		5

Antenna amplifier kit (30 to 850 mhz)

This wide band antenna amplifier covers the frequency range of 30 to 850MHz. It is ideal for weak VHF and UHF television signals and also for the amateur radio bands. No need for balancing.
Power supply: 9 - 12VDC
Output impedance: 60 Ohm
Max. amplification: 20dB(CPS7008F)

Quantity	Price
1 – 9	$46.64
10 – 99	$43.32
100 +	$41.88

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS7008F
Quantity Available:		3

car interference suppressor kit

A simple circuit that was designed to eliminate the interference signals generated by a car’s engine. These signals are particularly annoying when trying to listen to weak radio broadcasts. The car renders very useful services to its owner. Unfortunately, it also produces a high level of radio frequency interference signals originating from the car’s generator, wipers, flash indicators and air conditioning. (CPS1097)

Quantity	Price
1 – 9	$16.53
10 – 99	$15.66
100 +	$14.36

Skill Level of Item:		(Assembled and Tested)
Product #		CPS1097
Quantity Available:		2

FM RADIO

Features

double fun: building and listening !
easy to assemble: no coils to wind
one single adjustment
pre-assembled and tested FM front end
receives the complete FM band: 88-108 MHz
with ON/OFF switch, volume control and LED indicator

Specifications

power supply: 12V DC / 100mA (adaptor jack provided)
dimensions: 4.8" x 3.3"
(MK118)

Quantity	Price
1 – 9	$19.04
10 – 99	$17.69
100 +	$17.10

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		MK118
Quantity Available:		7

DUAL STEREO VU METER

This module contains 2 stereo VU meters with 2 x 5 LED indicators.

Specifications

indication: -13, -8, -3, 0, +3dB
sensitivity: 0dB = 0.775Vrms (easily adjustable)
supply voltage: 14 - 18V DC / 62mA
PCB dimensions: 1.1" x 3.9"

Extra Info
- Hints
The elder front-panels are not prepared for the mounting of these kits. However, a separate film is available on request so that it is possible to realise this extension merely by slightly adapting the existing aluninium panel.
(K2668)

Quantity	Price
1 – 9	$19.62
10 – 99	$18.23
100 +	$17.62

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		K2668
Quantity Available:		5

1-CHANNEL IR CODE LOCK TRANSMITTER

A choice can be made from over 8000 codes.

Specifications

one channel
distance transmitter / receiver: ± 23'
LED on / off indication and battery level indication
key holder housing
power supply: 12V battery type V23GA, GP23GAC (not incl.)
dimensions: 1.4" x 0.6" x 2.2"

(K6708)

Quantity	Price
1 – 9	$13.68
10 – 99	$12.96
100 +	$11.88

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		K6708
Quantity Available:		3

IR REMOTE CONTROLLED DIMMER

This one channel IR receiver/dimmer works together with the 15 channel IR transmitter (K6710 & K8049). The receiver code can be set to 1 of the 15 transmitter codes so that 15 receivers can be operated (K6712 and/or K6713) independently of each other. Thanks to its compact design this kit fits into a standard light switch housing.

Specifications

max. load: 2A (4A with heatsink)
supply voltage: 110V AC / 60Hz
transmitter / receiver distance: max. 23'
not suitable for halogen lights
(K6712)

Quantity	Price
1 – 9	$51.60
10 – 99	$47.93
100 +	$46.33

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		K6712
Quantity Available:		3

8-CHANNEL RF REMOTE TRANSMITTER

Features
8 addresses allow the use of multiple receivers
'all clear'- function
open-field range up to 50m
toggle or momentary mode for each key
Specifications
power supply: 3 AAA batteries
433MHz operation
8 digitalkodade kanaler
rubber keypad
LED function/mode indication
FCC approved ID code: NLO8058
(VM118R)

Quantity	Price
1 – 9	$46.08
10 – 99	$42.80
100 +	$41.37

Skill Level of Item:		(Assembled and Tested)
Product #		VM118R
Quantity Available:		3