Your Cart is Empty
View Cart
 
 
eTextiles
LilyPad Arduino 328 Main Board
Click here for specs, downloads, and more pictures.
Description: This is LilyPad Arduino - the main board consisting of an ATmega328 with the Arduino bootloader and a minimum number of external components to keep it as small (and as simple) as possible. Board will run from 2V to 5V. The latest version of the LilyPad supports automatic reset for even easier programming. The back side of the LilyPad is now completely flat! We now use a surface mount programming connector to keep the header from poking through.

This version of the LilyPad now uses the new ATmega328 at 8MHz. Arduino 0016 supports the Arduino Pro Mini 328/8MHz. Use this setting when using this new LilyPad 328.

LilyPad is a wearable e-textile technology developed by Leah Buechley. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable!

Dimensions:
  • 50mm outer diameter
  • Thin 0.8mm PCB
Read More
  Assembled and Tested  
  DEV09266  
  4  
Quantity:  

LilyPad LED White (5pcs)
Click here for specs, downloads, and more pictures.
Description: A simple, very bright, 250mcd, white LED LilyPad. Light up the night!
LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable!

Dimensions:
  • 5x11mm
  • Thin 0.8mm PCB
Read More
  Assembled and Tested  
  DEV10081  
  4  
Quantity:  

LilyPad Button Board
Click here for specs, downloads, and more pictures.
Description: We designed this board to give the user a very discrete button without any sharp edges. Button closes when you push it and opens when you release (momentary push button).

LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable!

Dimensions:
  • 8x16mm
  • Thin 0.8mm PCB
Read More
  Assembled and Tested  
  DEV08776  
  10  
Quantity:  

LilyPad Buzzer
Click here for specs, downloads, and more pictures.
Description: This is a small buzzer for the LilyPad system. Use 2 I/O pins on the LilyPad main board and create different noises based on the different frequency of I/O toggling. Loud enough to hear inside a pocket but not obtrusively loud.
Please note: This is an inductive buzzer meaning that is will act as a short to ground if you are not actively driving it. We recommend you put both I/O pins to low (0V) when the buzzer is not used.

LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable!

Dimensions:
  • 20mm outer diameter
  • Thin 0.8mm PCB
Read More
  Assembled and Tested  
  DEV08463  
  5  
Quantity:  

LilyPad Light Sensor
Click here for specs and more pictures.
Description: This is a simple to use light sensor that outputs an analog value from 0 to 5V. With exposure to daylight, this sensor will output 5V. Covering the sensor with your hand, the sensor will output 0V. In a normal indoor lighting situation, the sensor will output from 1 to 2V.

LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable!

Dimensions:
  • 20mm outer diameter
  • Thin 0.8mm PCB
Read More
  Assembled and Tested  
  DEV08464  
  3  
Quantity:  

LilyPad Power Supply
Click here for specs, downloads, and more pictures.
Description: A small, but mighty power supply. This board was designed to be as small and inconspicuous as possible. Pop in a AAA battery, flip the power switch, and you will have a 5V supply to power your LilyPad network. Good up to 100mA. Short circuit protected.
This board has AAA battery clips but can use an input from 1.2V to 5V. Our lithium polymer batteries are a good, rechargable alternative.

LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable - but be sure to remove the battery!

Dimensions:
  • 56x26mm
  • Thin 0.8mm PCB
Read More
  Assembled and Tested  
  DEV11259  
  2  
Quantity:  

LilyPad Tri-Color LED
Click here for specs, downloads, and more pictures.
Description: Blink any color you need! Use the Tri-Color LED board as a simple indicator, or by pulsing the red, green, and blue channels, you can create any color. Very bright output. This is a common anode design - to turn on a channel you simply need to ground one of the R/G/B pins to illuminate that channel.

LilyPad is a wearable technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable!

Dimensions:
  • 20mm outer diameter
  • Thin 0.8mm PCB
Read More
  Assembled and Tested  
  DEV08467  
  4  
Quantity:  

LilyPad Vibe Board
Click here for specs, downloads, and more pictures.
Description: 
Apply 5V and be shaken by this small, but powerful vibration motor. Works great as an physical indicator without notifying anyone but the wearer. This version uses a surface mount motor which is less likely to be damaged during use.

LilyPad is a wearable technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable!

Dimensions:
  • 20mm outer diameter
  • Thin 0.8mm PCB
Read More
  Assembled and Tested  
  DEV11008  
  3  
Quantity:  

LilyPad Temperature Sensor
Click here for specs, downloads, and more pictures.
Description: Detecting temperature changes has never been easier. The MCP9700 is a small thermistor type temperature sensor. This sensor will output 0.5V at 0 degrees C, 0.75V at 25 C, and 10mV per degree C. Doing an analog to digital conversion on the signal line will allow you to establish the local ambient temperature. Detect physical touch based on body heat and ambient conditions with this small sensor.

LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable!

Dimensions:
  • 20mm outer diameter
  • Thin 0.8mm PCB
Read More
  Assembled and Tested  
  DEV08777  
  2  
Quantity:  

LilyPad LiPower
Click here for specs, downloads, and more pictures.
 (Out of Stock)Description: A small, but very mighty power supply. This board was designed to be as small and inconspicuous as possible. The nice thing about LiPower is the ability to use rechargable Lithium Polymer batteries. These batteries are smaller, flatter, and last much longer than a AAA battery. Attach a single cell LiPo battery, flip the power switch, and you will have a 5V supply to power your LilyPad network. Good up to 150mA. Short circuit protected.

This board has a JST connector, which will connect to our JST terminated single cell 3.7V LiPo batteries. It also has terminals for charging the LiPo battery with one of our LiPo chargers.

LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable - but be sure to remove the battery!

Dimensions:
  • 18mm outer diameter
  • Thin 0.8mm PCB
Read More
  Assembled and Tested  
  DEV08786  
  0  
Quantity:  

LilyPad XBee
Click here for specs, downloads, and more pictures.
Description: The is a breakout board for the popular XBee modules. Board includes easy-to-sew tabs and all the necessary power regulation to run on the LilyPad system.

LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable!

LilyPad XBee was co-developed by Kate Hartman and Rob Faludi. It works with all the popular XBee module types but does not ship with a module. Please see the related items below.

Dimensions:
  • 50mm outer diameter
  • Thin 0.8mm PCB
Read More
  Assembled and Tested  
  DEV08937  
  6  
Quantity:  

LilyPad Accelerometer ADXL335
Click here for specs, downloads, and more pictures.
Description: This is a three axis accelerometer for the LilyPad system. Based on the ADXL335 accelerometer from Analog Devices, the LilyPad Accelerometer can detect joint movement as well as inclination and vibration.

The ADXL335 outputs a 0V to 3V analog signal on each of the X, Y, and Z axis. You will need to convert this analog voltage to a gravity amount and use trigonometry to calculate a true 'angle'. If you are not looking for tilt, it is very easy to use this sensor for basic motion sensing.

LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable!

Dimensions:
  • 20mm outer diameter
  • Thin 0.8mm PCB
Read More
  Assembled and Tested  
  DEV09267  
  2  
Quantity:  

LilyPad Slide Switch
Click here for specs, downloads, and more pictures.
Description: This is a simple slide switch for the LilyPad. Use it as a simple ON/OFF switch, or to control LEDs, buzzers, sensors, etc.

LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable!

Dimensions:
  • 7.75x18.1mm
  • Thin 0.8mm PCB
Read More
  Assembled and Tested  
  DEV09350  
  8  
Quantity:  

LilyPad Arduino Simple Board
Click here for specs, downloads, and more pictures.
Description: This is the LilyPad Arduino Simple Board. It's controlled by an ATmega328 with the Arduino bootloader. It has fewer pins than the LilyPad Arduino Main Board, a built in power supply socket, and an on/off switch. Any of our LiPo batteries can be plugged right into the socket. The Simple board is designed to streamline your next sewable project by keeping things simple and giving you more room to work  and eliminating the need to sew a power supply. This revision does away with the ISP header and adds a charging circuit based on the MCP73831 IC.

LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable!

Dimensions:
  • 50mm outer diameter
  • Thin 0.8mm PCB
Replaces: DEV09725
Read More
  Assembled and Tested  
  DEV10274  
  2  
Quantity:  

LilyPad LED Red (5pcs)
Click here for specs, downloads, and more pictures.
Description:Here is a simple 5 pack of red LEDs for LilyPad, or whatever else you can dream up. Light up the night!

LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable!

Dimensions:
  • 5x11mm
  • Thin 0.8mm PCB
Read More
  Assembled and Tested  
  DEV10044  
  22  
Quantity:  

LilyPad LED Blue (5pcs)
Click here for specs, downloads, and more pictures.
Description:Here is a simple 5 pack of blue LEDs for LilyPad, or whatever else you can dream up. Light up the night!

LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable!

Dimensions:
  • 5x11mm
  • Thin 0.8mm PCB
Read More
  Assembled and Tested  
  DEV10045  
  11  
Quantity:  

LilyPad LED Green (5pcs)
Click here for specs, downloads, and more pictures.
Description:Here is a simple 5 pack of green LEDs for LilyPad, or whatever else you can dream up. Light up the night!

LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable!

Dimensions:
  • 5x11mm
  • Thin 0.8mm PCB
Read More
  Assembled and Tested  
  DEV10046  
  7  
Quantity:  

LilyPad LED Yellow (5pcs)
Click here for specs, downloads, and more pictures.
Description: Here is a simple 5 pack of yellow LEDs for LilyPad, or whatever else you can dream up. Light up the night!

LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable!

Dimensions:
  • 5x11mm
  • Thin 0.8mm PCB
Read More
  Assembled and Tested  
  DEV10047  
  5  
Quantity:  

LilyPad Battery Connect
Click here for specs, downloads, and more pictures.
Description:The LilyPad Battery Connect simply gives you a connection point for a battery or anything else you might want to plug in to your LilyPad system. It consists of a single 2-pin JST connector on a small LilyPad board with positive and negative terminals.
LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable!

LilyPad Battery Connect is a design concepted by Felicia Williams of Boulder, Colorado.
Read More
  Assembled and Tested  
  DEV10083  
  4  
Quantity:  

LilyPad Simple Power
Click here for specs, downloads, and more pictures.
 (Out of Stock)Description: The LilyPad Simple Power is a board that lets you connect a battery (or other power source) and switch it on or off, that's it! We provide you with a JST connector and a slide switch. You can solder in your own surface mount (or through-hole) resistor in line with the output, or solder the jumper closed if you don't require a resistor.

LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable!

LilyPad Simple Power is a design concepted by Felicia Williams of Boulder, Colorado.
Read More
  Assembled and Tested  
  DEV10085  
  0  
Quantity:  

LilyPad FTDI Basic Breakout - 5V
Click here for specs, downloads, and more pictures.
Description: This is the LilyPad revision of our FTDI Basic. It is the same as our other FTDI Basic, but has a purple LilyPad board which is half the thickness.

This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 5V Arduino boards. It can also be used for general serial applications. The major difference with this board is that it brings out the DTR pin as opposed to the RTS pin of the FTDI cable. The DTR pin allows an Arduino target to auto-reset when a new Sketch is downloaded. This is a really nice feature to have and allows a sketch to be downloaded without having to hit the reset button. This board will auto reset any Arduino board that has the reset pin brought out to a 6-pin connector.

The pins labeled BLK and GRN correspond to the colored wires on the FTDI cable. The black wire on the FTDI cable is GND, green is CTS. Use these BLK and GRN pins to align the FTDI basic board with your Arduino target.

This board has TX and RX LEDs that make it a bit better to use over the FTDI cable. You can actually see serial traffic on the LEDs to verify if the board is working.

This board was designed to decrease the cost of Arduino development and increase ease of use (the auto-reset feature rocks!). Our Arduino Pro boards and LilyPads use this type of connector.

One of the nice features of this board is a jumper on the back of the board that allows the board to be configured to either 3.3V or 5V (both power output and IO level). This board ship as 5V, but you can cut the default trace and add a solder jumper if you need to switch to 3.3V.
Read More
  Assembled and Tested  
  DEV10275  
  7  
Quantity:  

ProtoSnap - LilyPad Development Board
Click here for specs, downloads, and more pictures.
Description: The ProtoSnap series is a new way to prototype your project without a breadboard. Everything is wired together on a single board, which makes it easy to explore the possibilities of the components before snapping them apart and building them into your project.

The ProtoSnap LilyPad Development Board is designed to get you started in the world of e-textiles. Combining a LilyPad Simple Board with other LilyPad components like a buzzer, a vibration motor, an RGB LED, a button, a switch, five LEDs, a light sensor, and a temperature sensor, the ProtoSnap LilyPad Development Board lets you dive right into wearable electronics. When you’ve learned how to program the LilyPad Arduino Simple Board, break apart the components and explore the power of the LilyPad platform.

Kit Includes:
  • 1 x LilyPad Simple Board
  • 1 x LilyPad Button
  • 1 x LilyPad Slide Switch
  • 5 x LilyPad White LED
  • 1 x LilyPad RGB tri-color LED
  • 1 x LilyPad Light Sensor
  • 1 x LilyPad Temp Sensor
  • 1 x LilyPad Buzzer
  • 1 x LilyPad Vibe board
  • 1 x LilyPad FTDI Basic
Read More
  Assembled and Tested  
  DEV10506  
  3  
Quantity:  

Light sensor (as used on USB6M)
Click here for specs, downloads, and more pictures.
Description: This is a simple to use light sensor that essentially is an LDR (light dependent resistor) in an enclosure. It has 1.5m ohms resistance in the dark and about .5k ohms in light. This is the same sensor used on our USB6M sound recorder and it's great for any project that needs a little "discrepancy" added to the light sensor because the enclosure really helps keep out unwanted light.

Dimensions:
  • 17mm L x 11mm W x 15mm H
  • OD tube: 5.5mm
Read More
  Assembled and Tested  
  6MLT  
  171  
Quantity:  

LilyPad LiPower
tn_DEV11260.jpg
 (Out of Stock)Replaces: DEV08786

Description: 
A small, but very mighty power supply. This board was designed to be as small and inconspicuous as possible. The nice thing about LiPower is the ability to use rechargable Lithium Polymer batteries. These batteries are smaller, flatter, and last much longer than a AAA battery. Attach a single cell LiPo battery, flip the power switch, and you will have a 5V supply to power your LilyPad network. Good up to 150mA. Short circuit protected.

This board has a JST connector, which will connect to our JST terminated single cell 3.7V LiPo batteries. It also has terminals for charging the LiPo battery with one of our LiPo chargers.

LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable - but be sure to remove the battery!
Read More
  Assembled and Tested  
  DEV11260  
  0  
Quantity: