PLASTIC ABS BOX - BLACK 85 x 55 x 30mm

Shopping Cart

	Your Cart is Empty
	View Cart

Specifications

dimensions: 85 x 55 x 30mm (3.35" x 2.17" x 1.18")
color: black
vertical grooves on the inside to fix PCB's
(WCAH2855)

Quantity	Price
1 – 9	$2.05
10 – 99	$1.94
100 +	$1.78

Skill Level of Item:		(Component or Part)
Product #		WCAH2855
Quantity Available:		8

Tell a Friend

You might also consider these items:

Battery clip for 9V PP3 Battery

Specifications
I-type
low-cost
(SNAP9V)

Quantity	Price
1 – 9	$0.21
10 – 99	$0.18
100 +	$0.16

Skill Level of Item:		(Component or Part)
Product #		SNAP9V
Quantity Available:		79

KC7783 PIR Detector Module (Assem and tested)

This is a fully assembled and tested miniature PIR module (KC7783 with KC778B IC) with only 3 connections: Power, Ground & Output. Rated for 4 - 12VDC input power. Uses RE200B PIR sensor. Output is an active high pulse of approx. 0.5 seconds and remains active as long as there is motion. Range up to 10 feet. PCB size: 35mm x 25mm(CPS76)

Quantity	Price
1 – 9	$9.45
10 – 99	$7.95
100 – 999	$6.95
1000 +	$5.45

Skill Level of Item:		(Component or Part)
Product #		CPS76
Quantity Available:		68

20 second voice recorder/playback module (A93010/A96010)

PLEASE NOTE: A96010 or A93010 is supplied depending on availability. Currently only A93010 is available and is the one that is been sold. A96010 is not currently available.

The small size is because the IC is in Chip-on-board form. One button is pushed down to record the message. The electret microphone is on the board. The LED turns on during this time. The other button just has to be momentarily pressed to replay the message. A second momentary press during playback will stop the playback. Sampling rate is 4K. All you have to add is the speaker (not included) and 5V DC power (not included).

The record play time is determined by the 52K resistor. If you change it to 89K you will get 30 seconds but at a reduced sampling rate. Operating current 25mA. Standby current 10 uA. Size: 34 x 23 x 11 mm. The module comes supplied as you see it in the photo. (A96010 & A93010)

Quantity	Price
1 – 9	$6.60
10 – 99	$5.95
100 – 999	$4.95
1000 +	$3.95

Skill Level of Item:		(Assembled and Tested)
Product #		A96010
Quantity Available:		217

5 x 20mm 2A FAST ACTING FUSE (10pcs)

Features:
"fast-acting"
low breaking capacity
Specifications:
current: 2A
packaging: 10pcs/box
test specifications:
opening time:
1.5 In: t>1H
2.1 In: max. 30min.
2.75 In: 50mS< t <2S
4 In: 10mS< t <300mS
10 In: max. 20mS
packaging: 10 pcs/pack
construction: glass cartridge, silvered caps
specifications: IEC127, BS4265 and CEE4
voltage rating: 250V AC
breaking capacity: 35A
endurance: cycling test as specified by IEC127 and BS4265
ambient temperature: 5°F to 95°F according to IEC/BS, up to 158°F
(FF2N)

Quantity	Price
1 – 9	$1.71
10 – 99	$1.44
100 +	$1.30

Skill Level of Item:		(Component or Part)
Product #		FF2N
Quantity Available:		11

BATTERY HOLDER FOR 2 x AA-CELL (WITH SNAP TERMINALS)

with snap terminals
(BH321B)

Quantity	Price
1 – 9	$0.32
10 – 99	$0.27
100 +	$0.24

Skill Level of Item:		(Component or Part)
Product #		BH321B
Quantity Available:		28

strobe light 12V DC red lens ( Xenon)

Features
for alarm systems, discos, personal use, warning in case of danger, etc...
Specifications
lens color: red
long-life xenon tube
protected against polarity reversal
fully sealed and waterproof
power output: 1W
power supply: DC 12V
current consumption: 150mA
flash rate: 90-110/min.
life expectancy: ± 3 x 1000000 flashes
operation temperature: -40°F to +176°F
black ABS / acrylic cover
dimensions: 2.8"(Ø) x 2.5"
(HAA40R)

Quantity	Price
1 – 9	$8.38
10 – 99	$7.94
100 +	$7.28

Skill Level of Item:		(Assembled and Tested)
Product #		HAA40R
Quantity Available:		9

MINI 3 1/2 DIGIT DMM - 19 RANGES

Features

automatic polarity indication
voltage measurements: AC 500V and DC 500V max.
current measurements: DC 10A max.
resistance measurements: 2Mohm
diode and transistor (hFE) test
packaging: blister
(DVM810)

Quantity	Price
1 – 9	$5.47
10 – 99	$5.18
100 +	$4.75

Skill Level of Item:		(Assembled and Tested)
Product #		DVM810
Quantity Available:		11

PACK OF 610 E12-SERIES RESISTORS

High-quality carbon film resistors with a connecting wire that is easily soldered.
High-quality carbon film resistors with a connecting wire that is easily soldered. Applications: TV's, audio and video equipment, telephone receivers and communication systems, instrumentation, home appliances

Features

applications: TV's, audio and video equipment, telephone receivers and communication systems, instrumentation, home appliances, ...

Specifications

quantity: 610 pieces (10 pcs per value)
serie: E12
number of values: 61 (from 10E to 1M)
power rating: 1/4W
operating temperature range: -55°C to + 155°C
operating temperature range: -67°F to 311°F
tolerance: 5%
max. operating voltage: 250V
(K/RES-E12)

Quantity	Price
1 – 9	$6.84
10 – 99	$6.48
100 +	$5.94

Skill Level of Item:		(Component or Part)
Product #		K/RES-E12
Quantity Available:		11

SPARE BIT FOR VTS20U - 0.04"

Specifications

tip: 0.04"
(BITU20)

Quantity	Price
1 – 9	$0.43
10 – 99	$0.36
100 +	$0.32

Skill Level of Item:		(Component or Part)
Product #		BITU20
Quantity Available:		12