firmware k148(T4) - Down Timer from 10000 minutes

Shopping Cart

	Your Cart is Empty
	View Cart

Programmable Down Timer counting down in minutes from a max of10,000 minutes (K148F(T4))

This firmware is a 4 digit programmable down timer with output and reset. The uC is marked T4. Timing is in minutes with a maximum programmable time of 10,000 minutes (0000) which is 166 hours 40 minutes, or 6 days, 22 hours and 40 minutes. It has four operating modes that control the output function when the timer reaches zero. Please note this item requires the CPS148 to work. This is only the firmware chip for CPS148. (BB075)

Quantity	Price
1 – 9	$10.45
10 – 99	$9.90
100 +	$8.95

Skill Level of Item:		(Component or Part)
Product #		BB075
Quantity Available:		3

Tell a Friend

This item is related to the items below.

4-digit Timing Module

Uses microcontroller and crystal for accurate low cost timing. a 4 digit LED multiplexed output display is used. 6 Types of firmware available. The standard included firmware chip (T0) with the module is a programmable down timer of 10,000 sec. Please note all other optional firmware chips (T1 to T5) are available seperately. PCB size: 2”x2.6” Timing accuracy: 0.04%. 9-12VDC Current: 50mA (CPS148)

Quantity	Price
1 – 9	$21.32
10 – 99	$19.80
100 +	$19.14

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS148
Quantity Available:		12

firmware K148 (T1) - Simple Photographic Time

This timer was developed after an enquiry from a hobbyist who wanted a simple 60 second timer when printing photographs. At the end of 60 seconds a beeper or buzzer would sound to indicate ‘times up’. After some discussion about other photographic uses it was decided to add some extra ranges as well. We also decided on an open collector style output rather than an on-board buzzer. This enabled the kit to drive other
devices such as relays, making it more useful in other applications. Please note this item requires the CPS148 to work. This is only the firmware chip for CPS148.
(BB072)

Quantity	Price
1 – 9	$10.45
10 – 99	$9.90
100 +	$8.95

Skill Level of Item:		(Component or Part)
Product #		BB072
Quantity Available:		8

firmware k148 (T2) - Stopwatch with Pause

Another in the series of timer kits based on the K148 hardware platform. This is a classic stopwatch timer with a pause feature as well. Timing is in hours, minutes, seconds and hundredths of a second up to a maximum of ‘99:59:59.99’. An output signal which pulses low every minute is also available. Please note this item requires the CPS148 to work. This is only the firmware chip for CPS148.
(BB073)

Quantity	Price
1 – 9	$10.45
10 – 99	$9.90
100 +	$8.95

Skill Level of Item:		(Component or Part)
Product #		BB073
Quantity Available:		8

firmware k148(T3) - 40KHz Auto Ranging Frequency

The third in a series of timer kits based on the K148 hardware platform. This module will measure frequency up to 40KHz in two ranges: above and below
10KHz. Range switching is automatic. Output is via a 4-digit 7-segment display. Please note this item requires the CPS148 to work. This is only the firmware chip for CPS148.
(BB074)

Quantity	Price
1 – 9	$10.45
10 – 99	$9.90
100 +	$8.95

Skill Level of Item:		(Component or Part)
Product #		BB074
Quantity Available:		3

firmware k148 (T5) - Down Timer from 10000 hour

This firmware is a 4 digit programmable down timer with output and reset. The uC is marked T5. Timing is in hours with a maximum programmable time of 10,000
hours (0000) which is 416 days 16 hours. It has four operating modes that control the output function when the timer reaches zero. Please note this item requires the CPS148 to work. This is only the firmware chip for CPS148.
(BB076)

Quantity	Price
1 – 9	$10.45
10 – 99	$9.90
100 +	$8.95

Skill Level of Item:		(Component or Part)
Product #		BB076
Quantity Available:		3