KC7786 PIR sensor module 12v (3pin .1in)

Shopping Cart

	Your Cart is Empty
	View Cart

Data Sheet

(MD778600)

This is a fully assembled and tested miniature PIR module (KC7786 with KC778B COB IC) with only 3 connections: Power, Ground & Output (3 pin terminal of standard 0.1 inch pitch). Rated for 12VDC input power. Uses RE200B PIR sensor. Output is an active high pulse of approx. 0.5 seconds and remains active as long as there is motion. Range up to 10 feet. PCB size: 27mm x 27mm (BB043)

Quantity	Price
1 – 9	$11.35
10 – 99	$9.95
100 – 999	$8.95
1000 – 9999	$8.15
10000 +	$7.45

Skill Level of Item:		(Component or Part)
Product #		BB043
Quantity Available:		166

Tell a Friend

Related items are:

KC778B Pir Controller Chip SOP

(BB055)

Quantity	Price
1 – 9	$3.75
10 – 99	$2.95
100 – 999	$2.65
1000 – 9999	$2.45
10000 – 99999	$2.35
100000 +	$2.25

Skill Level of Item:		(Component or Part)
Product #		BB055
Quantity Available:		88

..........................

KC778B Pir Controller Chip PDIP

(BB053)

Quantity	Price
1 – 9	$3.75
10 – 99	$2.95
100 – 999	$2.65
1000 +	$2.45

Skill Level of Item:		(Component or Part)
Product #		BB053
Quantity Available:		35

..........................

Fresnel lens only (for KC7786)

(BB052)

Quantity	Price
1 – 9	$0.81
10 – 99	$0.65
100 – 999	$0.55
1000 +	$0.47

Skill Level of Item:		(Component or Part)
Product #		BB052
Quantity Available:		8

You might also consider these items:

KC7783 PIR Detector Module (Assem and tested)

This is a fully assembled and tested miniature PIR module (KC7783 with KC778B IC) with only 3 connections: Power, Ground & Output. Rated for 4 - 12VDC input power. Uses RE200B PIR sensor. Output is an active high pulse of approx. 0.5 seconds and remains active as long as there is motion. Range up to 10 feet. PCB size: 35mm x 25mm(CPS76)

Quantity	Price
1 – 9	$9.45
10 – 99	$7.95
100 – 999	$6.95
1000 +	$5.45

Skill Level of Item:		(Component or Part)
Product #		CPS76
Quantity Available:		581

..........................

KC7783R PIR Detector Module (Low cost version) (Assem and tested)

Mechanical and electrical specs is the same as the KC7783 except for a lower cost IC (KC778B IC) package used in this KC7783R
RoHS compliant: YES.

(BB054)

Quantity	Price
1 – 9	$8.98
10 – 99	$7.45
100 – 999	$6.75
1000 +	$5.75

Skill Level of Item:		(Component or Part)
Product #		BB054
Quantity Available:		791

..........................

Fresnel lens only (for KC7786)

(BB052)

Quantity	Price
1 – 9	$0.81
10 – 99	$0.65
100 – 999	$0.55
1000 +	$0.47

..........................

RE200B-P Pyroelectric Infrared Sensor

(BB083)

Quantity	Price
1 – 9	$1.76
10 – 99	$1.65
100 – 999	$1.45
1000 +	$1.35

Skill Level of Item:		(Component or Part)
Product #		BB083
Quantity Available:		75

..........................

KC778B Pir Controller Chip PDIP

(BB053)

Quantity	Price
1 – 9	$3.75
10 – 99	$2.95
100 – 999	$2.65
1000 +	$2.45

..........................

20 second voice recorder/playback module (A93010/A96010)

PLEASE NOTE: A96010 or A93010 is supplied depending on availability. Currently only A93010 is available and is the one that is been sold. A96010 is not currently available. The small size is because the IC is in Chip-on-board form. One button is pushed down to record the message. The electret microphone is on the board. The LED turns on during this time. The other button just has to be momentarily pressed to replay the message. A second momentary press during playback will stop the playback. Sampling rate is 4K. All you have to add is the speaker (not included) and 5V DC power (not included). The record play time is determined by the 52K resistor. If you change it to 89K you will get 30 seconds but at a reduced sampling rate. Operating current 25mA. Standby current 10 uA. Size: 34 x 23 x 11 mm. The module comes supplied as you see it in the photo.

OPTIONAL ITEMS (Not included):
2 x (BB089) connector cable to connect the voice recorder to a speaker and power source.
1 x (PB244) Speaker
1 x Battery holder that can hold either 4 x AAA or 4 x AA or 4 x C or 4 x D cells. See our battery holders.

(A96010 & A93010)

Quantity	Price
1 – 9	$6.60
10 – 99	$5.95
100 – 999	$4.95
1000 +	$3.95

Skill Level of Item:		(Assembled and Tested)
Product #		A96010
Quantity Available:		146

..........................

KC778B Pir Controller Chip SOP

(BB055)

Quantity	Price
1 – 9	$3.75
10 – 99	$2.95
100 – 999	$2.65
1000 – 9999	$2.45
10000 – 99999	$2.35
100000 +	$2.25

..........................

PIR Movement Detector

Circuit designed around a recently developed movement IC (KC778B). Circuit utilizes PIR detector and a light dependent resistor (LDR) to provide an optimized circuit that will detect motion up to 6 meters (18 feet) away. Operates on 9-12 VDC. Note that the PIR sensor & the PCB-mounted fresnel lens fit on the other side of the PCB; the solder side. This is to allow the unit to be mounted inside a container with the detecting lens poking out and the controls facing inside the box. PCB dimensions 3 inch x 2 inch. (CPS30)

Quantity	Price
1 – 9	$23.26
10 – 99	$21.60
100 +	$20.88

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS30
Quantity Available:		7

..........................

IR Door Minder

This kit uses an infrared (IR) beam to monitor door & passage-ways or any other area. When the beam is broken a relay is tripped which can be used to sound a bell or alarm. Suitable for detecting customers entering a shop, cars coming up a driveway, etc. The IR beam is very strong. Distances over 25 yards can be monitored with this kit. A 12VDC unregulated supply is required to power the kit. A 12V wall adaptor is fine. Only one power supply needs to be used to power both units. The relays in this kit are rated to switch mains voltages. With power applied the relay is normally operated and only releases when the beam is broken. The relay contacts labelled “NO” (Normally Open) and “NC” (Normally Closed) refer to when the relay is released. The plastic tube is to put over the IR LED to direct its beam. This is needed when the barrier is only a few yards apart. IR transmitter PCB size:: 45mm x 30mm (1.77" x 1.18")
IR receiver PCB size:: 50mm x 48mm (1.97" x 1.89") (CPS130)

Quantity	Price
1 – 9	$22.23
10 – 99	$21.06
100 +	$19.31

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS130
Quantity Available:		6