Ding/Dong Door Chime COB Module kit

Shopping Cart

	Your Cart is Empty
	View Cart

Documentation (SG5 KIT)

Ding/dong door chime the classic door chime ding dong. Adjust the component values in the two RC networks to get exactly the tones you want. 3V low stand-by current. Kit includes 1 x switch, 1Watt 8ohm speaker, 2 x AA batery holder, COB and mother board. COB PCB size: 16mm x 29mm.(CPSSG5)

Quantity	Price
1 – 9	$11.40
10 – 99	$10.80
100 +	$9.90

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPSSG5
Quantity Available:		9

Tell a Friend

Related items are:

Ding/Dong Door Chime COB PCB ONLY (14pin)

PCB size: 1"x1/2" (SG5COB). Please note: This is only the COB PCB. For the complete kit see CPSSG5

Quantity	Price
1 – 9	$0.71
10 – 99	$0.59
100 – 999	$0.49
1000 +	$0.39

Skill Level of Item:		(Component or Part)
Product #		SG5COB
Quantity Available:		2803

You might also consider these items:

Ding Dong Doorbell COB M581 C601 (5pin)

The C601 is a "ding dong" sound generator in COB form. This circuit is specially designed for doorbell or alarm application. Features include wide operation voltage from 1.5-5.0 volts, true one shot-one time "Ding Dong", build in oscillator-no ext resistor and minimum external component. PCB size: 1/2"x3/4" (BB063)

Quantity	Price
1 – 9	$0.71
10 – 99	$0.55
100 – 999	$0.45
1000 +	$0.39

Skill Level of Item:		(Component or Part)
Product #		BB063
Quantity Available:		415

..........................

Ding/Dong Door Chime COB PCB ONLY (14pin)

PCB size: 1"x1/2" (SG5COB). Please note: This is only the COB PCB. For the complete kit see CPSSG5

Quantity	Price
1 – 9	$0.71
10 – 99	$0.59
100 – 999	$0.49
1000 +	$0.39

..........................

20 second voice recorder/playback module (A93010/A96010)

PLEASE NOTE: A96010 or A93010 is supplied depending on availability. Currently only A93010 is available and is the one that is been sold. A96010 is not currently available. The small size is because the IC is in Chip-on-board form. One button is pushed down to record the message. The electret microphone is on the board. The LED turns on during this time. The other button just has to be momentarily pressed to replay the message. A second momentary press during playback will stop the playback. Sampling rate is 4K. All you have to add is the speaker (not included) and 5V DC power (not included). The record play time is determined by the 52K resistor. If you change it to 89K you will get 30 seconds but at a reduced sampling rate. Operating current 25mA. Standby current 10 uA. Size: 34 x 23 x 11 mm. The module comes supplied as you see it in the photo.

OPTIONAL ITEMS (Not included):
2 x (BB089) connector cable to connect the voice recorder to a speaker and power source.
1 x (PB244) Speaker
1 x Battery holder that can hold either 4 x AAA or 4 x AA or 4 x C or 4 x D cells. See our battery holders.

(A96010 & A93010)

Quantity	Price
1 – 9	$6.60
10 – 99	$5.95
100 – 999	$4.95
1000 +	$3.95

Skill Level of Item:		(Assembled and Tested)
Product #		A96010
Quantity Available:		128