2W amplifier module LM380

Shopping Cart

	Your Cart is Empty
	View Cart

Documentation in acrobat format

This is a very simple amplifier built around the LM380 IC. It can deliver up to 2W into an 8 ohm speaker depending on the supply voltage. Instead of using a heatsink or heat fins the heat produced is dissipated through the center pins of the IC into the copper overlay left on the PCB. If you do require a sustained output of more than ½ watt, you will need to add a heatsink (not included). The IC solders directly to the PCB.
PCB size: 1.75in x 1.75in (45mm x 45mm)

Power output:
> 2 Watt max. (4-8 ohms, 20V)
> 1 Watt max. (4-8 ohms, 12V)
> 0.5 Watt RMS continuous

Quantity	Price
1 – 9	$14.25
10 – 99	$13.50
100 +	$12.38

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS97
Quantity Available:		14

Tell a Friend

You might also consider these items:

TDA7052 Amplifier Module 1W

A 1W power amplifier building block designed to be part of a larger project. Ideal as a low power battery operated amplifier (from 3 to 15V) driving an 8 ohm speaker. The Philips TDA7052 is a general purpose amplifier. No heatsink needed. Short circuit protected. PCB size: 1.2" x 1.2" (30mm x 30mm)

Quantity	Price
1 – 9	$13.68
10 – 99	$12.96
100 +	$11.88

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS27
Quantity Available:		16

..........................

Speaker Round 3 inch 8 ohm 1 watt

Diameter: 76mm (3 inch)
1 Watt
8 Ohm

Quantity	Price
1 – 9	$3.99
10 – 99	$3.78
100 – 999	$3.47
1000 +	$3.19

Skill Level of Item:		(Component or Part)
Product #		PB244
Quantity Available:		28

..........................

audio amplifier 1W (LM386) kit

A kit module designed to be used as a building block in a larger project. The semiconductor LM386 is a general purpose power amplifier designed for use in low voltage applications. Gain may be set between 20 and 200. LM386 data sheet included. Supply voltage: 4 to 12V(CPS17)
PCB size: 1.5in x 1.25in (38mm x 31mm)

Quantity	Price
1 – 9	$13.68
10 – 99	$12.96
100 +	$11.88

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS17
Quantity Available:		25

..........................

Preamplifier

A preamplifier to use with an electret or other microphone to boost the signal before feeding into an amplifier. Simple and easy to build. PCB Size: 1.75" x 1.25". Power supply: 6 to 12VDC (Electret microphone Included)

Quantity	Price
1 – 9	$13.68
10 – 99	$12.96
100 +	$11.88

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS98
Quantity Available:		36

..........................

TDA2002 / TDA2003 Amplifier Module kit

A proven & popular power amplifier building block for use in any audio project. Power output is dependent on the supply voltage and load resistance. Over 10W is typical for a 16V supply into a 2 ohm speaker. A 12V supply into a 4 ohm speaker will deliver around 4W. Small heatsink provided. In late 2000 the LM383 was discontinued but the TDA2002 is a direct replacement for the LM383. (CPS47)

Quantity	Price
1 – 9	$19.38
10 – 99	$18.36
100 +	$16.83

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS47
Quantity Available:		5

..........................

6 - 10W Stereo Ampl Mod using TDA2005

Kit 143 is a class AB stereo audio power
amplifier designed for quality hi-fi
applications using a TDA2005 module. It is
easy to construct and has a minimum of
external components. The module has output
current protection and thermal protection. This
is the data book circuit which produces an
excellent sound. The supply voltage required
for this kit is 8 - 18V DC at 1 to 2 Amps.

PCB size 3"x1 3/4"(CPS143)

Quantity	Price
1 – 9	$21.66
10 – 99	$20.52
100 +	$18.81

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS143
Quantity Available:		15