KC7783 PIR Detector Module (Assem and tested)

Shopping Cart

	Your Cart is Empty
	View Cart

Data sheet (MD778301)

Click here for a schematic when using this PIR with a relay.

This is a fully assembled and tested miniature PIR module (KC7783 with KC778B IC) with only 3 connections: Power, Ground & Output. Rated for 4 - 12VDC input power. Uses RE200B PIR sensor. Output is an active high pulse of approx. 0.5 seconds and remains active as long as there is motion. Range up to 10 feet. PCB size: 35mm x 25mm(CPS76)

Quantity	Price
1 – 9	$9.45
10 – 99	$7.95
100 – 999	$6.95
1000 +	$5.45

Skill Level of Item:		Component or Part
Product #		CPS76
Quantity Available:		907

Tell a Friend

Related items are:

Make a motion activated message playback module.

Tutorial on how to build a motion activated sound module using a few parts you can pick up on our web store. Or get one here that is already put together!

Dual HI / LO Switching Relay Board

The kit is based around the ULN2003A IC, a 7-channel high voltage, high current relay driver. The inputs are TTL compatible so they can be connected to 5V. LO 0-0.8VDC. HI 2.4V - 12VDC. Operating voltage: 12V DC. The relay will be operated when either the LO input is low (0 – 0.8V) or the HI input is high (2.4V – 12V.). Two 12V relays, coil resistance 400 ohm are used. It is rated to switch 250VAC at 12A. However, because of the PCB track thickness and width we do not recommend using the relay to switch more than 5A. PCB size: 2 3/4"x1 3/4"

Quantity	Price
1 – 9	$14.82
10 – 99	$14.04
100 +	$12.87

Skill Level of Item:		Kit - Basic Soldering Required
Product #		CPS156
Quantity Available:		13

KC7783R PIR Detector Module (Low cost version) (Assem and tested)

Mechanical and electrical specs is the same as the KC7783 except for a lower cost IC (KC778B IC) package used in this KC7783R RoHS compliant: YES. (BB054)

Quantity	Price
1 – 9	$8.98
10 – 99	$7.45
100 – 999	$6.75
1000 – 9999	$5.75
10000 +	$4.95

Skill Level of Item:		Component or Part
Product #		BB054
Quantity Available:		350

Fresnel lens only (As found on the KC7783 & KC7783R)

(BB194)

Quantity	Price
1 – 9	$0.81
10 – 99	$0.65
100 – 999	$0.55
1000 +	$0.47

Skill Level of Item:		Component or Part
Product #		BB194
Quantity Available:		36

KC778B Pir Controller Chip SOP

(BB055)

Quantity	Price
1 – 9	$3.75
10 – 99	$2.95
100 – 999	$2.65
1000 – 9999	$2.45
10000 – 99999	$2.35
100000 +	$2.25

Skill Level of Item:		Component or Part
Product #		BB055
Quantity Available:		249

RE200B-P Pyroelectric Infrared Sensor

(BB083)

Quantity	Price
1 – 9	$1.76
10 – 99	$1.65
100 – 999	$1.45
1000 +	$1.35

Skill Level of Item:		Component or Part
Product #		BB083
Quantity Available:		231

KC7786 PIR sensor module 12v (3pin .1in)

This is a fully assembled and tested miniature PIR module (KC7786 with KC778B COB IC) with only 3 connections: Power, Ground & Output (3 pin terminal of standard 0.1 inch pitch). Rated for 12VDC input power. Uses RE200B PIR sensor. Output is an active high pulse of approx. 0.5 seconds and remains active as long as there is motion. Range up to 10 feet. PCB size: 27mm x 27mm (BB043)

Quantity	Price
1 – 9	$11.35
10 – 99	$9.95
100 – 999	$8.95
1000 – 9999	$8.15
10000 +	$7.45

Skill Level of Item:		Component or Part
Product #		BB043
Quantity Available:		67

SPD61 PIR sensor module (high/low output)

This is a fully assembled and tested miniature PIR module. Compact and complete, easy to use PIR Sensor Module for human body detection. Incorporating a Fresnel lens and motion detection IC, suitable for a wide range of supply voltages and with low current drain. Adjustable delay time with high sensitivity and low noise. Output can be standard TTL output signal (high/low output)

Quantity	Price
1 – 9	$7.41
10 – 99	$7.02
100 – 999	$6.44
1000 – 9999	$6.19
10000 +	$5.99

Skill Level of Item:		Component or Part
Product #		SPD61-HL
Quantity Available:		15

Click here for detailed specs and larger picture.

KC7789M PIR Sensor Module with lens -C

KC7789M is a very small size PIR sensor module with built-in amplifier and logic circuit. The heart of the module is highly reliable PIR controller KC778B. The PIR sensor can be manufacturer specified. The detection angle and distance dependence on the lens used.

PLEASE NOTE: Cap Fresnel lens version C included.

Features:

Ultra small size for unlimited application
Built-in amplifier to provide TTL output signal
High sensitivity with special noise cancellation design
High immunity to RFI and line noise
Signal will not output within 25 sec when power up
Signal output is 0.5sec min
Low operation current
3-wire cable of 70mm

Quantity	Price
1 – 9	$15.96
10 – 99	$15.12
100 +	$13.86

Skill Level of Item:		Assembled and Tested
Product #		KC7789M-C
Quantity Available:		5

KC7789M PIR Sensor Module with lens -F

Ultra small size for unlimited application
Built-in amplifier to provide TTL output signal
High sensitivity with special noise cancellation design
High immunity to RFI and line noise
Signal will not output within 25 sec when power up
Signal output is 0.5sec min
Low operation current
3-wire cable of 70mm

Quantity	Price
1 – 9	$15.96
10 – 99	$15.12
100 +	$13.86

Skill Level of Item:		Assembled and Tested
Product #		KC7789M-F
Quantity Available:		7

Click here for specs, downloads, and more pictures.

MINI PIR MOTION DETECTOR - BUILD IN

Features:

with automatic day/night identification
light sensitivity and ON-time adjustable
for building-in

Specifications:

detection angle: 100°
detection range: 26 ft.
rated load: load, 150W fluorescent load (120V)
power supply: 120V/50-60Hz
working temperature: 14°F~104 °F
working humidity: <93%RH
time-delay switch: 5 s, 30 s, 1 min, 3 min, 5 min, 8 min
light control: < 3 Lux to 2000 Lux
dimensions:
visible part: Ø55/64" x 25/64"
hidden part (controller): 2 11/64" x 1" x 1 3/8"
weight: 1.44 oz.

Quantity	Price
1 – 9	$12.23
10 – 99	$11.58
100 – 999	$10.59
1000 – 9999	$9.99
10000 +	$9.49

Skill Level of Item:		Component or Part
Product #		PIR415U
Quantity Available:		15

4.5V PIR w/Adjustable Sensitivity

This is the PIR that is used with our USB6M+PIR module. It has an adjustable sensitivity and it's dimensions are: 35mm x 28mm.

NOTE: This is the PIR sensor module ONLY.

Quantity	Price
1 – 9	$8.98
10 – 99	$8.51
100 – 999	$7.79
1000 +	$7.49

Skill Level of Item:		Assembled and Tested
Product #		6MPIR
Quantity Available:		814

You might also consider these items:

KC7783R PIR Detector Module (Low cost version) (Assem and tested)

Mechanical and electrical specs is the same as the KC7783 except for a lower cost IC (KC778B IC) package used in this KC7783R RoHS compliant: YES. (BB054)

Quantity	Price
1 – 9	$8.98
10 – 99	$7.45
100 – 999	$6.75
1000 – 9999	$5.75
10000 +	$4.95

RE200B-P Pyroelectric Infrared Sensor

(BB083)

Quantity	Price
1 – 9	$1.76
10 – 99	$1.65
100 – 999	$1.45
1000 +	$1.35

KC7786 PIR sensor module 12v (3pin .1in)

Quantity	Price
1 – 9	$11.35
10 – 99	$9.95
100 – 999	$8.95
1000 – 9999	$8.15
10000 +	$7.45

Fresnel lens only (for KC7786)

(BB052) Fresnel Lens ONLY.

Quantity	Price
1 – 9	$0.81
10 – 99	$0.65
100 – 999	$0.55
1000 +	$0.47

Skill Level of Item:		Component or Part
Product #		BB052
Quantity Available:		576

2pin connector cable (8 inch)

Quantity	Price
1 – 9	$0.33
10 – 99	$0.29
100 +	$0.24

Skill Level of Item:		Component or Part
Product #		BB089
Quantity Available:		89

Toy motor kit

Construct a working DC Motor. This clever kit has been delighting children for decades. All parts provided, including: 2 coils of copper wire; base; field pole; armature core; brushes; all fasteners. Instruction booklet with theory and experiments included.
Operates on 3 to 6 volt batteries (not included). (CPN135S)

Quantity	Price
1 – 9	$8.79
10 – 99	$8.32
100 +	$7.62

Skill Level of Item:		Kit - No Soldering Required
Product #		CPN135S
Quantity Available:		64

KC778B Pir Controller Chip SOP

(BB055)

Quantity	Price
1 – 9	$3.75
10 – 99	$2.95
100 – 999	$2.65
1000 – 9999	$2.45
10000 – 99999	$2.35
100000 +	$2.25

Click here for more pictures, software, etc...

Audio to light modulator kit

Description: A music-to-light modulator is a circuit which controls the intensity of one or more lights in response to an audio input. The kit is ideal to give the lights rhythm to any party or disco without much money. Very safe operation as it uses an opto-coupler as a coupling device between the audio and the mains controlling stages of the circuit. This is the assembled version of our CPS12.

Specifications:
Input trigger voltage: 2.3 - 2.5V (min)
Operating voltage: 110 or 250 VAC
Power handling: 220W @ 110V or 500W @ 250V
PCB size: 2.16" x 1.63" (To help in the decision to select an enclosure keep in mind that the heat sink used in the kit is about 1" tall.)

PLEASE NOTE: THIS KIT USES 120V MAINS ELECTRICITY AND SHOULD NOT BE ATTEMPTED BY ANYONE WITHOUT THE PROPER SKILL LEVEL. THIS SHOULD ALSO BE BUILT IN A SUITABLE PLASTIC ENCLOSURE.

Quantity	Price
1 – 9	$17.10
10 – 99	$16.20
100 +	$14.85

Skill Level of Item:		Kit - Basic Soldering Required
Product #		CPS12
Quantity Available:		22

C-Cam2AX cmos Camera Module, B/W, EIA (Out of Stock)

16mm square (0.63" square) by 15mm (0.59") high. 5V, low cost, low power and very small! Only 5 pins need to be connected. Power Supply, 5V +/- 0.5V. Voltage regulated circuit essential. Sensor used: OV5116
(BB004)

Quantity	Price
1 – 9	$18.48
10 – 99	$17.95
100 – 999	$16.95
1000 +	$15.95

Skill Level of Item:		Assembled and Tested
Product #		BB004
Quantity Available:		0