Your Cart is Empty
View Cart
 
 
KC7783 PIR Detector Module (Assem and tested)CPS76
Product Number: CPS76
Click image to enlarge
This is a fully assembled and tested miniature PIR module (KC7783 with KC778B IC) with only 3 connections: Power, Ground & Output. Rated for 4 - 12VDC input power. Uses RE200B PIR sensor. Output is an active high pulse of approx. 0.5 seconds and remains active as long as there is motion. Range up to 10 feet. PCB size: 35mm x 25mm.

Product #: CPS76

Skill Level: Component or Part

Additional Details:

Documentation and Downloads:

Leave a Comment or Ask a Question:

Quantity:  

676  
in stock and available for immediate shipment.

 
Click here for more details
KC7783 PIR Detector Module (Assem and tested)
Click here for specs, downloads, and more pictures.
This is a fully assembled and tested miniature PIR module (KC7783 with KC778B IC) with only 3 connections: Power, Ground & Output. Rated for 4 - 12VDC input power. Uses RE200B PIR sensor. Output is an active high pulse of approx. 0.5 seconds and remains active as long as there is motion. Range up to 10 feet. PCB size: 35mm x 25mm.
Read More
  Component or Part  
  CPS76  
  676  
Quantity:  

Dual HI / LO Switching Relay Board (Kit)
tn_cps156_kit.png
Description: The kit is based around the ULN2003A IC, a 7-channel high voltage, high current relay driver. The inputs are TTL compatible so they can be connected to 5V. LO 0-0.8VDC. HI 2.4V - 12VDC. Operating voltage: 12V DC. The relay will be operated when either the LO input is low (0 – 0.8V) or the HI input is high (2.4V – 12V.). Two 12V relays, coil resistance 400 ohm are used. It is rated to switch 250VAC at 12A. However, because of the PCB track thickness and width we do not recommend using the relay to switch more than 5A. PCB size: 2 3/4"x1 3/4"
Read More
  Kit - Basic Soldering Required  
  CPS156  
  10  
Quantity:  

KC7783R PIR Detector Module (Low cost version) (Assembled and tested)
Click here for detailed specs.
Mechanical and electrical specs is the same as the KC7783 except for a lower cost IC (KC778B IC) package used in this KC7783R.


RoHS Compliant: YES.
Read More
  Component or Part  
  BB054  
  494  
Quantity:  

Fresnel lens only (As found on the KC7783 & KC7783R)
Click here for detailed specs.
(BB194)
Read More
  Component or Part  
  BB194  
  17  
Quantity:  

KC778B Pir Controller Chip SOP
tn_bb055.jpg
KC778B Pir Controller Chip SOP

Download Datasheet here:
http://www.electronics123.com/s.nl/it.A/id.74/.f
Read More
  Component or Part  
  BB055  
  391  
Quantity:  

RE200B-P Pyroelectric Infrared Sensor
Click here for detailed specs.
RE200B-P Pyroelectric Infrared Sensor
Read More
  Component or Part  
  BB083  
  503  
Quantity:  

KC7786 PIR Sensor Module 12v (3pin .1in)
Click here for detailed specs.
Description: This is a fully assembled and tested miniature PIR module (KC7786 with KC778B COB IC) with only 3 connections: Power, Ground & Output (3 pin terminal of standard 0.1 inch pitch). Rated for 12VDC input power. Uses RE200B PIR sensor. Output is an active high pulse of approx. 0.5 seconds and remains active as long as there is motion. Range up to 10 feet. PCB size: 27mm x 27mm
Read More
  Component or Part  
  BB043  
  59  
Quantity:  

SPD61 PIR sensor module (high/low output)
Click here for specs, downloads, and more pictures.
This is a fully assembled and tested miniature PIR module. Compact and complete, easy to use PIR Sensor Module for human body detection. Incorporating a Fresnel lens and motion detection IC, suitable for a wide range of supply voltages and with low current drain. Adjustable delay time with high sensitivity and low noise. Output can be standard TTL output signal (high/low output)
Read More
  Component or Part  
  SPD61-HL  
  61  
Quantity:  

KC7789M PIR Sensor Module with Lens -C
Click here for detailed specs and larger picture.
Description: KC7789M is a very small size PIR sensor module with built-in amplifier and logic circuit. The heart of the module is highly reliable PIR controller KC778B. The PIR sensor can be manufacturer specified. The detection angle and distance dependence on the lens used.

PLEASE NOTE:
Cap Fresnel lens version C included.

Features:
  • Ultra small size for unlimited application
  • Built-in amplifier to provide TTL output signal
  • High sensitivity with special noise cancellation design
  • High immunity to RFI and line noise
  • Signal will not output within 25 sec when power up
  • Signal output is 0.5sec min
  • Low operation current
  • 3-wire cable of 70mm
Read More
  Assembled and Tested  
  KC7789M-C  
  19  
Quantity:  

KC7789M PIR Sensor Module with lens -F
Click here for detailed specs and larger picture.
KC7789M is a very small size PIR sensor module with built-in amplifier and logic circuit. The heart of the module is highly reliable PIR controller KC778B. The PIR sensor can be manufacturer specified. The detection angle and distance dependence on the lens used.

PLEASE NOTE: Cap Fresnel lens version F included.

Features:
  • Ultra small size for unlimited application
  • Built-in amplifier to provide TTL output signal
  • High sensitivity with special noise cancellation design
  • High immunity to RFI and line noise
  • Signal will not output within 25 sec when power up
  • Signal output is 0.5sec min
  • Low operation current
  • 3-wire cable of 70mm
Read More
  Assembled and Tested  
  KC7789M-F  
  15  
Quantity:  

Mini PIR Motion Detector - Build In
Click here for specs, downloads, and more pictures.
Features:
  • With automatic day/night identification
  • Light sensitivity and ON-time adjustable
  • For building-in

Specifications:

  • Detection angle: 100°
  • Detection range: 26 ft.
  • Rated load: load, 150W fluorescent load (120V)
  • Power supply: 120V/50-60Hz
  • Working temperature: 14°F~104 °F
  • Working humidity: <93%RH
  • Time-delay switch: 5 s, 30 s, 1 min, 3 min, 5 min, 8 min
  • Light control: < 3 Lux to 2000 Lux
  • Dimensions:
  • Visible part: Ø55/64" x 25/64"
  • Hidden part (controller): 2 11/64" x 1" x 1 3/8"
  • Weight: 1.44 oz.
Read More
  Component or Part  
  PIR415U  
  7  
Quantity:  

4.5V PIR with Adjustable Sensitivity
Click here for specs, downloads, and more pictures.
Description: This is the PIR that is used with our USB6M+PIR module. It has an adjustable sensitivity and it's dimensions are: 35mm x 28mm. PIR range is approximately 9 - 13 feet.

NOTE: This is the PIR sensor module ONLY.
Read More
  Assembled and Tested  
  6MPIR  
  361  
Quantity:  

KC7783R PIR Detector Module (Low cost version) (Assembled and tested)
Click here for detailed specs.
Mechanical and electrical specs is the same as the KC7783 except for a lower cost IC (KC778B IC) package used in this KC7783R.


RoHS Compliant: YES.
Read More
Quantity:  

RE200B-P Pyroelectric Infrared Sensor
Click here for detailed specs.
RE200B-P Pyroelectric Infrared Sensor
Read More
Quantity:  

KC7786 PIR Sensor Module 12v (3pin .1in)
Click here for detailed specs.
Description: This is a fully assembled and tested miniature PIR module (KC7786 with KC778B COB IC) with only 3 connections: Power, Ground & Output (3 pin terminal of standard 0.1 inch pitch). Rated for 12VDC input power. Uses RE200B PIR sensor. Output is an active high pulse of approx. 0.5 seconds and remains active as long as there is motion. Range up to 10 feet. PCB size: 27mm x 27mm
Read More
Quantity:  

Fresnel lens only (for KC7786)
Click here for another picture.
(BB052) Fresnel Lens ONLY.
Read More
  Component or Part  
  BB052  
  331  
Quantity:  

2pin connector cable (8 inch)
tn_bb089.jpg
2pin connector cable (8 inch)
Read More
  Component or Part  
  BB089  
  72  
Quantity:  

Toy motor kit
Click here for detailed specs.
Construct a working DC Motor. This clever kit has been delighting children for decades. All parts provided, including: 2 coils of copper wire; base; field pole; armature core; brushes; all fasteners. Instruction booklet with theory and experiments included.
Operates on 3 to 6 volt batteries (not included). (CPN135S)
Read More
  Kit - No Soldering Required  
  CPN135S  
  26  
Quantity:  

KC778B Pir Controller Chip SOP
tn_bb055.jpg
KC778B Pir Controller Chip SOP

Download Datasheet here:
http://www.electronics123.com/s.nl/it.A/id.74/.f
Read More
Quantity:  

Mini-Vox and Relay Kit
Click here for detailed specs.
 (Out of Stock)Description: The idea behind a VOX (voice activated switch) is that instead of the user pressing a switch to activate a relay, the sound of the users voice itself activates the relay. This gives hands-free control over devices like tape recorders. Power supply needed: 12VDC center positive 2.5mm jack. Electret microphone to pick up the sound is included. PCB size: 44mm x 48mm (1.73inch x 1.89inch).
Read More
  Kit - Basic Soldering Required  
  CPS126  
  0  
Quantity:  

Audio to Light Modulator Kit
tn_cps12_kit.png
Description: A music-to-light modulator is a circuit which controls the intensity of one or more lights in response to an audio input. The kit is ideal to give the lights rhythm to any party or disco without much money. Very safe operation as it uses an opto-coupler as a coupling device between the audio and the mains controlling stages of the circuit.

Specifications:
  • Input trigger voltage: 2.3 - 2.5V (min)
  • Operating voltage: 110 or 250 VAC
  • Power handling: 220W @ 110V or 500W @ 250V
  • PCB size: 2.16" x 1.63" (To help in the decision to select an enclosure keep in mind that the heat sink used in the kit is about 1" tall.)

PLEASE NOTE: THIS KIT USES 120V MAINS ELECTRICITY AND SHOULD NOT BE ATTEMPTED BY ANYONE WITHOUT THE PROPER SKILL LEVEL. THIS SHOULD ALSO BE BUILT IN A SUITABLE PLASTIC ENCLOSURE.
Read More
  Kit - Basic Soldering Required  
  CPS12  
  39  
Quantity: