5 Ultra Bright LEDs random COB Module

Shopping Cart

	Your Cart is Empty
	View Cart

full documentation in acrobat format (K52M)

Five Ultra Bright LEDs flashing in random or in sequence. Uses a COB (Chip-on-board) PCB measuring 3cm x 1.5 cm. The flashing frequency is set by a single external resistor between 300K and 1M ohm. A pad connected high determines the random or sequential flash pattern. A second pad connected low determines whether the flashing is continuous or set by a toggle switch. Ideal for schools. 2.0V DC to 3.6V DC operation. Operating current 10 - 16mA. Standby current is less than 1uA. (CPS52M)

Quantity	Price
1 – 9	$7.98
10 – 99	$7.56
100 +	$6.93

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS52M
Quantity Available:		15

Tell a Friend

Related Items are:

COB ONLY from 5 LEDs random module

This is just the COB for the CPS52M. See the CPS52M for more details. PCB size: 1"x1/2" (BB046)

Quantity	Price
1 – 9	$0.49
10 – 99	$0.45
100 – 999	$0.39
1000 +	$0.29

Skill Level of Item:		(Component or Part)
Product #		BB046
Quantity Available:		757

You might also consider these items:

Touch/Contact Switch

Both types of switches are built onto the one PCB so you can see and explore how each type works. A battery can power the touch switch (2 contacts) but a power supply (like CPS4) must be used for the touch plate (1 terminal) to work. High quality 12V relay rated at switching 240V/3A supplied. Uses 14011 IC. (CPS10)

Quantity	Price
1 – 9	$7.98
10 – 99	$7.56
100 +	$6.93

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS10
Quantity Available:		7

Toy motor kit

Construct a working DC Motor. This clever kit has been delighting children for decades. All parts provided, including: 2 coils of copper wire; base; field pole; armature core; brushes; all fasteners. Instruction booklet with theory and experiments included.
Operates on 3 to 6 volt batteries (not included). (CPN135S)

Quantity	Price
1 – 9	$5.45
10 – 99	$5.25
100 +	$4.95

Skill Level of Item:		(Kit - No Soldering Required)
Product #		CPN135S
Quantity Available:		68

Stereo Preamplifier - Tone Control Unit

This is a preamplifier and tone control unit
which will make a useful addition to any
of our power amplifier kits. It is extremely
easy to construct due to the use of a special IC,
the Philips TDA 1524A. This contains all the
circuitry required to provide up to 20 dB of
voltage gain, +/-15 dB of bass and treble
control, channel balance, and a switchable
loudness contour.
Specification
D.C. Input : 15V DC supply or 12V DC battery. 50 mA min.
Maximum output : > 3 V RMS
Maximum input : > 300 mV, G = 20 dB
> 3V RMS, G = 0dB. Input Z > 10 k ohm. Output Z < 300 ohm
Frequency resp. : < 10 Hz to > 50 kHz + / – 1 dB
THD at 1kHz : < 0.1 % at 1V output
S/N ratio : > 80 dB, G = 0 dB
Bass boost/cut ~ 15 dB at 50 Hz
Treble boost/cut ~ 15 dB at 15 kHz
PCB size: 4 inches x 2 1/4 inches. (CPS100)

Quantity	Price
1 – 9	$20.35
10 – 99	$18.90
100 +	$18.27

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS100
Quantity Available:		6

Electronic Music Box Engine

This kit is the electronic equivalent of a mechanical music box. Tunes are contained in an IC. Tunes are started by light falling on an LDR. Two music IC's provided. 8ohm 1 watt speaker included. PCB size: 43mm x 34mm (1.69inch x 1.34inch)
Power supply: 3VDC (CPS104)

Quantity	Price
1 – 9	$14.82
10 – 99	$14.04
100 +	$12.87

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS104
Quantity Available:		9

18W BTL Audio Power Amplifier

This kit contains the essential components to build a low voltage, high power mono 18W Bridge Tied Load (BTL) amplifier module using the Hitachi HA13118. The circuit is straight out of the data sheet. Only a few external passive components are required to make the module. The IC contains surge protection circuits and thermal shutdown circuits. The speaker and cables are not included. (CPS105)

Quantity	Price
1 – 9	$14.25
10 – 99	$13.50
100 +	$12.38

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS105
Quantity Available:		14

50W amplifier module TDA7294 (Out of Stock)

The heart of this amplifier module is a monolithic integrated circuit from SGS-Thomson, TDA7294. It is intended for use as an audio class AB amplifier in hi-fi applications. It has a wide voltage range and output current capability, enabling it to supply the highest power into both 4 Ohm and 8 Ohm loads. With the addition of a handful of parts and a suitable power supply, this module will deliver > 50W RMS into 8 Ohm @ 0.1% THD. HEATSINK NOT INCLUDED. User must supply a heatsink rated at 1.4 deg C/W.

Specifications (± 35V D.C. power supply)
Output power : > 50W RMS, 4-8 Ω load
~ 80W into 4Ω max.
~ 60W into 8Ω max.
Gain: 24 dB (30dB modification)
Input sensitivity : 1.3V for 50W, 8 ohm
0.9V for 50W, 4 ohm
(0.6V, 50W, 8Ω, G=30dB)
Input impedance : 10kΩ
Signal-to-Noise ratio : > 95 dB, (>105 dBA)
Frequency response : ~ 20Hz - 200kHz, –3 dB
Slew rate : > 10V/uS
THD : < 0.01%, 1W-40W,1kHz
< 0.1%, at 50W, 20-20kHz
IMD : < 0.01%, 1W

(CPS106)

Quantity	Price
1 – 9	$30.04
10 – 99	$27.90
100 +	$26.97

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS106
Quantity Available:		0

Square Wave Oscillator LN/NE555 (inc box

Simple circuit to generate square waves of approximately 1Hz 10Hz 100Hz 1KHz 10KHz & 100KHz. A square wave generator is one of those pieces of equipment that has many uses in the workshop yet few hobbyists actually have. This simple kit, based on the popular 555 timer IC, generates six preset frequencies from 1Hz to 100khz. It has an operating voltage range of 5 to 18VDC and even provides visual indication of the output. The kit is constructed on a single-sided printed circuit board (PCB). The PCB size: is 78 x 50mm (3.1" x 2") and will mount on a small plastic 'Jiffy' box. (CPS111)

Quantity	Price
1 – 9	$13.11
10 – 99	$12.42
100 +	$11.39

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS111
Quantity Available:		8

1W Stereo Amplifier Module

Uses 2 LM386N-1 for a stereo amplifier. Ideal for walkman and other battery powered items. 4V - 12V DC. Instructions PCB and components supplied.

This is a 1 watt per channel, stereo amplifier module Kit using two LM386N IC’s from National Semiconductor. It is basically two of our CPS17’s on a single PC board, with a dual gang pot. It will operate best from 6-12V DC and will work well from a battery since the quiescent current drain is only 10 mA. It requires no heat sinks for normal use. The input and output are both ground referenced. Maximum output will be obtained with a 12V power supply and 8 ohm speaker, however it is particularly suitable for driving headphones from a supply as low as 4V. Speakers are not supplied. They should be rated at 3W or over. PCB size 63mm x 40mm (2.5" x 1.5"). (CPS115)

Quantity	Price
1 – 9	$10.83
10 – 99	$10.26
100 +	$9.41

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS115
Quantity Available:		12