Stairway To Heaven Game Kit (inc box)

Shopping Cart

	Your Cart is Empty
	View Cart

Documentation in acrobat format (K5)

A game of skill to turn on the Stairway of 6 LEDs as the bi- colour LED flashes. Introduces you to several basic electronic circuits with a surprisingly difficult game to play. Box included. Good introduction to electronics. 9V battery.(CPS5)

Quantity	Price
1 – 9	$11.97
10 – 99	$11.34
100 +	$10.40

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS5
Quantity Available:		3

Tell a Friend

You might also consider these items:

Toy motor kit

Construct a working DC Motor. This clever kit has been delighting children for decades. All parts provided, including: 2 coils of copper wire; base; field pole; armature core; brushes; all fasteners. Instruction booklet with theory and experiments included.
Operates on 3 to 6 volt batteries (not included). (CPN135S)

Quantity	Price
1 – 9	$5.45
10 – 99	$5.25
100 +	$4.95

Skill Level of Item:		(Kit - No Soldering Required)
Product #		CPN135S
Quantity Available:		61

40 pin Univ ZIF Socket wide slot

Solder directly to PCB or plug directly into IC socket.
Screw mounting holes for more reliable operation.
(BB007)

Quantity	Price
1 – 9	$12.95
10 – 99	$11.95
100 +	$10.95

Skill Level of Item:		(Component or Part)
Product #		BB007
Quantity Available:		15

Easy Microcontrol n (ver 4.1)

"Easy Microcontrol'n" © is intended to ease the beginner toward understanding and application of the PIC ® line of microcontrollers from Microchip Technology, Inc. Examples of assembly language programs range from a simple one to turn on LED's to more complex ones for timing and for event-counting. Writing programs is covered in-depth and the use of flow charts, as an aid to visualizing what a program does, is emphasized. The approach is hands-on with many examples, all of which may be demonstrated using a very simple demo board (a project) in the beginning of the book. By David Benson (8-1/2 x 11 format, 179 pages)(BB022)

Quantity	Price
1 – 9	$33.20
10 – 99	$31.95
100 +	$28.95

Skill Level of Item:		(Book)
Product #		BB022
Quantity Available:		1

firmware k148 (T2) - Stopwatch with Pause

Another in the series of timer kits based on the K148 hardware platform. This is a classic stopwatch timer with a pause feature as well. Timing is in hours, minutes, seconds and hundredths of a second up to a maximum of ‘99:59:59.99’. An output signal which pulses low every minute is also available. Please note this item requires the CPS148 to work. This is only the firmware chip for CPS148.
(BB073)

Quantity	Price
1 – 9	$10.45
10 – 99	$9.90
100 +	$8.95

Skill Level of Item:		(Component or Part)
Product #		BB073
Quantity Available:		8

USB PIC Programmer (Assembled) (Zif socket included)

This programmer connects to a USB port. On board 'B' USB connector. Free software. A wide-slot 40 pin ZIF socket is included with this assembled version. Power supply: at least 16VDC (18VDC preferred) center positive required (power supply jack 5.5mm OD 2.5mm ID) at least 200mA. See this page for which devices can be programmed. (CPA150)

Quantity	Price
1 – 9	$77.52
10 – 99	$72.00
100 +	$69.60

Skill Level of Item:		(Assembled and Tested)
Product #		CPA150
Quantity Available:		13

3 Digit LED Counter (incl box)

Two or more counter modules may be plugged together with the 6-pin sockets and harness provided. Uses a single-unit 3-digit LED display and is built around the 14553 & 14511 chips. Box is provided. The separate COUNTER MODULE shows how to use the kit as a counter. Has COUNT & RESET switches with debounce circuit built in to eliminate problems from noisy switches. May cut off and relocate display. The kit includes data sheets and instructions. 9V battery operation. PCB1 size 1.94"x3.13" (49x78mm). PC2 size 1.31"x 1.38" (33x35mm) (CPS1)

Quantity	Price
1 – 9	$19.86
10 – 99	$18.45
100 +	$17.84

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS1
Quantity Available:		6

Touch/Contact Switch

Both types of switches are built onto the one PCB so you can see and explore how each type works. A battery can power the touch switch (2 contacts) but a power supply (like CPS4) must be used for the touch plate (1 terminal) to work. High quality 12V relay rated at switching 240V/3A supplied. Uses 14011 IC. (CPS10)

Quantity	Price
1 – 9	$7.98
10 – 99	$7.56
100 +	$6.93

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS10
Quantity Available:		7

Stereo Preamplifier - Tone Control Unit

This is a preamplifier and tone control unit
which will make a useful addition to any
of our power amplifier kits. It is extremely
easy to construct due to the use of a special IC,
the Philips TDA 1524A. This contains all the
circuitry required to provide up to 20 dB of
voltage gain, +/-15 dB of bass and treble
control, channel balance, and a switchable
loudness contour.
Specification
D.C. Input : 15V DC supply or 12V DC battery. 50 mA min.
Maximum output : > 3 V RMS
Maximum input : > 300 mV, G = 20 dB
> 3V RMS, G = 0dB. Input Z > 10 k ohm. Output Z < 300 ohm
Frequency resp. : < 10 Hz to > 50 kHz + / – 1 dB
THD at 1kHz : < 0.1 % at 1V output
S/N ratio : > 80 dB, G = 0 dB
Bass boost/cut ~ 15 dB at 50 Hz
Treble boost/cut ~ 15 dB at 15 kHz
PCB size: 4 inches x 2 1/4 inches. (CPS100)

Quantity	Price
1 – 9	$20.35
10 – 99	$18.90
100 +	$18.27

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS100
Quantity Available:		5

Servo Motor Driver using PIC16C71 1-4

Using a PIC 16C71, a crystal, 8 resistors & 4 capacitors this kit will independently control up to 4 servo motors. We do not supply the potentiometers or servo motors. (a Futaba FP-S148 was used in the tests.) 5V DC power supply required. Full instructions provided.
Servo motors are used in radio-controlled models (cars, planes), robotics, theme park special effects, test equipment, industrial automation. At the hobbyist end of the market they are small, compact and relatively inexpensive at around US$20. The motors themselves are black boxes which contain a motor, gearbox and decoder electronics. Three wires go into the box; 5V, ground and signal. A short shaft comes out of the motor which usually has a circular interface plate attached to it. Most servos will rotate through about 100 degrees in less than a second according to the signal input. This kit will control up to 4 servo motors simultaneously. (CPS102)

Quantity	Price
1 – 9	$19.86
10 – 99	$18.45
100 +	$17.84

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS102
Quantity Available:		12