IR Door Minder

Shopping Cart

	Your Cart is Empty
	View Cart

IR Door Minder

(Full documentation in acrobat format) (K130)

This kit uses an infrared (IR) beam to monitor door & passage-ways or any other area. When the beam is broken a relay is tripped which can be used to sound a bell or alarm. Suitable for detecting customers entering a shop, cars coming up a driveway, etc. The IR beam is very strong. Distances over 25 yards can be monitored with this kit. A 12VDC unregulated supply is required to power the kit. A 12V wall adaptor is fine. Only one power supply needs to be used to power both units. The relays in this kit are rated to switch mains voltages. With power applied the relay is normally operated and only releases when the beam is broken. The relay contacts labelled “NO” (Normally Open) and “NC” (Normally Closed) refer to when the relay is released. The plastic tube is to put over the IR LED to direct its beam. This is needed when the barrier is only a few yards apart. IR transmitter PCB size:: 45mm x 30mm (1.77" x 1.18")
IR receiver PCB size:: 50mm x 48mm (1.97" x 1.89") (CPS130)

Quantity	Price
1 – 9	$21.66
10 – 99	$20.52
100 +	$18.81

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS130
Quantity Available:		8

Tell a Friend

Related items are:

IR LIGHT BARRIER

Applications : announce visitors, warn against burglars, set boundaries, for science projects,...

Specifications

audible (85dB) and visible (LED) alert
range: 3.3ft to 13ft
on/off switch provided
power supply:
transmitter: 9V DC / 50mA max.
receiver: 9V DC / 20mA max.
9V battery holder and adapter jack included
dimensions:
transmitter: 2.2" x 1.6"
receiver: 3.9" x 2.0"
not recommended for outdoor use
(MK120)

Quantity	Price
1 – 9	$7.18
10 – 99	$6.80
100 +	$6.24

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		MK120
Quantity Available:		9

You might also consider these items:

Audio to light modulator kit

A music-to-light modulator is a circuit which controls the intensity of one or more lights in response to an audio input. The kit is ideal to give the rhythm to any party or disco without much money. Very safe operation as it uses an opto-coupler as a coupling device between the audio and the mains controlling stages of the circuit.
Input trigger voltage: 2.3 - 2.5V (min)
Operating voltage: 110 or 250 VAC
Power handling: 220W @ 110V or 500W @ 250V
PCB size: 2.16" x 1.63" (To help in the decision to select an enclosure keep in mind that the heat sink used in the kit is about 1" tall.)
PLEASE NOTE, THIS KIT USES 120V MAINS ELECTRICITY AND SHOULD NOT BE ATTEMPTED BY ANYONE WITHOUT THE PROPER SKILL LEVEL. THIS SHOULD ALSO BE BUILT IN A SUITABLE PLASTIC ENCLOSURE.
(CPS12)

Quantity	Price
1 – 9	$14.25
10 – 99	$13.50
100 +	$12.38

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS12
Quantity Available:		31

..........................

3 Digit LED Counter (incl box)

Two or more counter modules may be plugged together with the 6-pin sockets and harness provided. Uses a single-unit 3-digit LED display and is built around the 14553 & 14511 chips. Box is provided. The separate COUNTER MODULE shows how to use the kit as a counter. Has COUNT & RESET switches with debounce circuit built in to eliminate problems from noisy switches. May cut off and relocate display. The kit includes data sheets and instructions. 9V battery operation. PCB1 size 1.94"x3.13" (49x78mm). PC2 size 1.31"x 1.38" (33x35mm) (CPS1)

Quantity	Price
1 – 9	$21.80
10 – 99	$20.25
100 +	$19.58

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS1
Quantity Available:		5

..........................

20 second voice recorder/playback module (A93010/A96010)

PLEASE NOTE: A96010 or A93010 is supplied depending on availability. Currently only A93010 is available and is the one that is been sold. A96010 is not currently available. The small size is because the IC is in Chip-on-board form. One button is pushed down to record the message. The electret microphone is on the board. The LED turns on during this time. The other button just has to be momentarily pressed to replay the message. A second momentary press during playback will stop the playback. Sampling rate is 4K. All you have to add is the speaker (not included) and 5V DC power (not included). The record play time is determined by the 52K resistor. If you change it to 89K you will get 30 seconds but at a reduced sampling rate. Operating current 25mA. Standby current 10 uA. Size: 34 x 23 x 11 mm. The module comes supplied as you see it in the photo.

OPTIONAL ITEMS (Not included):
2 x (BB089) connector cable to connect the voice recorder to a speaker and power source.
1 x (PB244) Speaker
1 x Battery holder that can hold either 4 x AAA or 4 x AA or 4 x C or 4 x D cells. See our battery holders.

(A96010 & A93010)

Quantity	Price
1 – 9	$6.60
10 – 99	$5.95
100 – 999	$4.95
1000 +	$3.95

Skill Level of Item:		(Assembled and Tested)
Product #		A96010
Quantity Available:		150

..........................

Ultrasonic Movement Detector2

Our first ultrasonic movement detector -CPS20 - has been very popular. This is another circuit design which we believe is more sensitive with fewer components. The transducers are mounted on the same PCB as the circuit.(CPS49)

Quantity	Price
1 – 9	$20.35
10 – 99	$18.90
100 +	$18.27

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS49
Quantity Available:		4

..........................

Voice Recording Module 2 x 20sec sections

The A96020 voice recording module offers true single chip solid state storage capability and requires no software or micro-controller support. It provides high quality recording and playback with dual 20 second message. Sampling rate is 3.2K. Size: 34 x 23 x 11 mm. All you need to do is add a speaker (not included) and 5V DC Power (not included). Features - Non volatile flash memory technology - No battery back up required - User friendly, easy to operate - Slide switch for record or play back - Separate key to trigger message 1 or 2 - Low power consumption - LED to indicate recording and playback - Built-in condenser mic - Automatic power down - 5-6V Operation.

OPTIONAL ITEMS (Not included):
2 x (BB089) connector cable to connect the voice recorder to a speaker and power source.
1 x (PB244) Speaker
1 x Battery holder that can hold either 4 x AAA or 4 x AA or 4 x C or 4 x D cells. See our battery holders.

(A96020)

Quantity	Price
1 – 9	$7.55
10 – 99	$6.95
100 – 999	$5.95
1000 +	$4.95

Skill Level of Item:		(Assembled and Tested)
Product #		A96020
Quantity Available:		59

..........................

KC7786 PIR sensor module 12v (3pin .1in)

This is a fully assembled and tested miniature PIR module (KC7786 with KC778B COB IC) with only 3 connections: Power, Ground & Output (3 pin terminal of standard 0.1 inch pitch). Rated for 12VDC input power. Uses RE200B PIR sensor. Output is an active high pulse of approx. 0.5 seconds and remains active as long as there is motion. Range up to 10 feet. PCB size: 27mm x 27mm (BB043)

Quantity	Price
1 – 9	$11.35
10 – 99	$9.95
100 – 999	$8.95
1000 – 9999	$8.15
10000 +	$7.45

Skill Level of Item:		(Component or Part)
Product #		BB043
Quantity Available:		167

..........................

Relay Board for 5/10A Relay

Relay Board for 5/10A Relay(CPS43)

Quantity	Price
1 – 9	$9.69
10 – 99	$9.18
100 +	$8.42

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS43
Quantity Available:		6

..........................

KC7783 PIR Detector Module (Assem and tested)

This is a fully assembled and tested miniature PIR module (KC7783 with KC778B IC) with only 3 connections: Power, Ground & Output. Rated for 4 - 12VDC input power. Uses RE200B PIR sensor. Output is an active high pulse of approx. 0.5 seconds and remains active as long as there is motion. Range up to 10 feet. PCB size: 35mm x 25mm(CPS76)

Quantity	Price
1 – 9	$9.45
10 – 99	$7.95
100 – 999	$6.95
1000 +	$5.45

Skill Level of Item:		(Component or Part)
Product #		CPS76
Quantity Available:		712