Serial Isolated I/O Module (kit)

Shopping Cart

	Your Cart is Empty
	View Cart

(Full Documentation in pdf Format)

Q: Can this module be used in standalone mode?
A: No. It needs to be connected to a PC. However the state of the relays will be "remembered" and will not change when disconnected from the PC.

(K108)

8-Relay Module (mains rated - 110V and 250VAC.) An extension of our Kit CPS74 (see next kit), PC controlled 8-Relay Board with 250V switching relays and added features. It is in a plastic case, latched relay operation, 250V relays switched in safety by using Dinkle connectors, and with 4 external inputs. Uses serial port so it can be located over 100 yards from the PC. Comes with case and end panel pieces as shown in the photos. Requires a center positive 9-to-12V DC power supply, at least 500mA, 2.5mm jack. (CPS108)

Quantity	Price
1 – 9	$69.95
10 – 99	$64.95
100 +	$59.95

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS108
Quantity Available:		7

Tell a Friend

Related items are:

Unregulated Wall Transformer 120VAC to 12VDC 500mA (Out of Stock)

Input voltage: 120VAC@60Hz
2-wire
Output voltage: 12VDC
Output current: 500mA
Output plug: 2.5mmID x 5.5mmOD female center positive
(BB204)

Quantity	Price
1 – 9	$11.08
10 – 99	$10.50
100 +	$9.62

Skill Level of Item:		(Assembled and Tested)
Product #		BB204
Quantity Available:		0

..........................

Serial Isolated I/O Module (Assembled & Tested)

8-Relay Module (mains rated - 110V and 250VAC.) An extension of our Kit CPS74, PC controlled 8-Relay Board with 250V switching relays and added features. It is in a plastic case, latched relay operation, 250V relays switched in safety by using Dinkle connectors, and with 4 external inputs. Uses serial port so it can be located over 100 yards from the PC. Comes with case and end panel pieces as shown in the photos. Requires a center positive 9-to-12V DC power supply, at least 500mA, 2.5mm jack. (CPA108)

Quantity	Price
1 – 9	$74.95
10 – 99	$69.95
100 +	$65.95

Skill Level of Item:		(Assembled and Tested)
Product #		CPA108
Quantity Available:		4

..........................

Upgrade K108 - join two k108 together

CPS108/CPA108 has been a good seller. This kit is to connect two of them together to give 6 Inputs and 16 Relay Outputs. All you have to do is change the firmware, change the front & back panels, and jumper out 2 ICs.
(BB086)

Quantity	Price
1 – 9	$29.07
10 – 99	$27.00
100 +	$26.10

Skill Level of Item:		(Kit - No Soldering Required)
Product #		BB086
Quantity Available:		5

..........................

USB/RS485 I/O Controller (Relayduino)

KTA-223 ‘Relayduino’ USB/RS485 IO Module
The KTA-223 is a USB or RS485 controlled IO module for interfacing PCs to real world applications, such as controlling lights and sprinkler systems, reading sensors and monitoring switches and other digital signals. The Relays are capable of switching up to 5A at 250VAC, 10A at 120VAC and 10A at 24VDC but the PCB tracks will only handle up to about 5A. A simple ASCII protocol allows control from Windows/Mac/Linux using either USB Virtual COM drivers or RS485. Additionally, multiple devices can be connected to one RS485 bus, allowing control of many devices from one USB port.

The controller is based on the hardware of the Arduino physical computing controllers. It can be programmed as a stand-alone controller using the free, open source Arduino environment. Internally, the controller is “shield compatible”, allowing the use of many extension boards designed for the Arduino Deumilanove. As shipped the controller is loaded with a sketch that receives simple commands over the USB or RS485 serial port and switches relays or responds with the status of inputs.

Multiple controllers can be connected to one or more PCs in an RS485 network. Each controller can be assigned an address and will respond to commands addressed to them.

Light Flasher Software
Our Light Flasher software for the KTA-223 allows you to sequence the relays in patterns. This is designed for Christmas lights, trapshooting and other simple time loop controls.

Quantity	Price
1 – 9	$124.95
10 – 99	$121.50
100 +	$117.45

Skill Level of Item:		(Assembled and Tested)
Product #		BB282
Quantity Available:		6

..........................

Modbus I/O Module

Modbus Digital Input and Output Controller!
This is a Modbus RTU Controlled I/O module. It acts as a Modbus Slave and can be connected to PC's and PLC's

Each Modbus I/O Module provides eight relay outputs each capable of switching 5 amps @240VAC and four opto-isolated digital inputs. Other features of the controller are
8 Relay Outputs
4 Opto Isolated inputs
2 Analog Inputs (0-5V or 0-20mA)
1 PWM Output
RS-485 Port
Both the Modbus address and communication parameters (baudrate, parity) can be saved to EEPROM
All connections to the I/O are via screw connectors.
Power Indicator LED
(BB245)

Quantity	Price
1 – 9	$134.69
10 – 99	$125.10
100 +	$120.93

Skill Level of Item:		(Assembled and Tested)
Product #		BB245
Quantity Available:		2

..........................

PC Printer Port Relay Board (Assembled) (version 2)

Do you have an old PC lying around the house which absolutely no one wants? Then you can convert it into a dedicated controller. Communicate with the real world via the parallel printer port on your PC. Simply connect a DB25 straight trough cable from computer to DB25 connector on the relay board. There are 8 relays each capable of switching 12VDC/10A or 240VAC/5A. Each relay has an LED to indicate when it is operated. We provide two sets of complete, stand-alone software to control the relays: one works under DOS so you can write your own batch files to control individual relays, the other works under Windows. Needs 12VDC center positive 2.5mm power supply. PCB Size 6.75" x 2.75" (CPA74)

Quantity	Price
1 – 9	$37.31
10 – 99	$34.65
100 +	$33.50

Skill Level of Item:		(Assembled and Tested)
Product #		CPA74
Quantity Available:		10

..........................

PC Printer Port Relay Board (kit) (version 2)

Do you have an old PC lying around the house which absolutely no one wants? Then you can convert it into a dedicated controller. Communicate with the real world via the parallel printer port on your PC. Simply connect printer cable from computer to Centronics connector on relay board. There are 8 relays each capable of switching 12VDC/10A or 240VAC/5A. Each relay has an LED to indicate when it is operated. We provide two sets of complete, stand-alone software to control the relays: one works under DOS so you can write your own batch files to control individual relays, the other under Windows 3.1. Needs 12VDC center positive 2.5mm power supply. PCB Size 6.75" x 2.75" (version 2) (CPS74)

Quantity	Price
1 – 9	$31.98
10 – 99	$29.70
100 +	$28.71

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS74
Quantity Available:		3

..........................

Parallel port output module (V2) (Assembled)

This is our Kit 74V2 but put into a box with top quality Dinkle connectors to the relays. With the rapid progress in computer technology many people now have a surplus computer just gathering dust somewhere. Thus these computers are free to be used as dedicated controllers for a variety of uses: turning on/off lights or other devices around the home, office, laboratory or factory come to mind. All that is needed is the interface to connect it to the real world. (CPA165)

Quantity	Price
1 – 9	$49.42
10 – 99	$45.90
100 +	$44.37

Skill Level of Item:		(Assembled and Tested)
Product #		CPA165
Quantity Available:		10

You might also consider these items:

Upgrade K108 - join two k108 together

Quantity	Price
1 – 9	$29.07
10 – 99	$27.00
100 +	$26.10