blogo.jpg
  Register   Log In 
Welcome
My Account
Shopping Cart
Checkout
Contact Us
Specials
New Products
Kits and Modules
Arduino
Components
Consumer & PC
Tools and Meters
Security
App Development
Books
How To
Consumer & PC > Camcorder & Camera >  Returning Customers
click here to log in.
Shopping Cart
Your Cart is Empty
View Cart
 
 

2.4GHz Wireless NTSC Outdoor Camera

09189-02.jpg
CLOSEOUT ITEM - WHILE STOCK LASTS.


Description: This water resistant outdoor 2.4GHz camera needs only a 12VDC for operation. We decided to carry them simply because of their versatility and ease of use. The camera goes on your robot/aerial/teddy bear platform and the receiver connects to any device that has an RCA input (TVs, video cards, etc.). Power up the camera, tune the receiver a bit and you'll be looking at a live color image with audio of whatever the camera is pointing at.

Retail package comes with everything shown: Camera, power adapters for camera (12V) and receiver (12V), RCA cable, antenna, and compact receiver.

Example google video from one of our helicopter customers...

Features:
  • Color NTSC (North America)
  • Mono Audio Transmission
  • Resolution : 380 Lines
  • Illumination : 1.5Lux at F1.2
  • Power Output : 640mW
  • Transmission Distance: 250 meters line of sight
 
Quantity
Price
1 – 9$83.98
10 – 99$77.99
100 +$75.40

  (Assembled and Tested)  
  WRL09189  
  4  
 
 
Tell a Friend
 
Click here for specs, downloads, and more pictures.
RFM22B-S2 SMD Wireless Transceiver
 
Description: The RFM22B is a low-cost ISM FSK transceiver module which offers communication at 433/868/915MHz ISM bands and adjustable output power of up to +20 dBm. The wide operating voltage range of 1.8–3.6 V and low current consumption makes the RFM22B an ideal solution for battery powered applications.
Communication with the RFM22B is achieved via a standard 4-wire SPI interface. Three configurable general purpose I/Os are also available, the use of which can be tailored towards the needs of your project. A host of other features are also available including an 8-bit ADC, temperature sensor, RX and TX FIFOs, and low-battery detection. See the datasheet below for a complete description of every register and command.

The module comes in a 16-pin, 16 x 16mm, SMD package, with pins spaced by 2mm. Look for a breakout board coming soon!

Features:
  • Frequency Range: 433/MHz ISM bands
  • REV: Revision 3.0
  • Sensitivity = -121 dBm
  • Output power range: +20 dBm Max
  • Data Rate = 0.123 to 256 kbps
  • FSK, GFSK, and OOK modulation
  • Power Supply = 1.8 to 3.6 V
  • Ultra low power shutdown mode
  • Digital RSSI
  • Wake-up timer
  • Auto-frequency calibration (AFC)
  • Power-on-reset (POR)
  • Antenna diversity and TR switch control
  • Configurable packet handler
  • Preamble detector
  • TX and RX 64 byte FIFOs
  • Low battery detector
  • Temperature sensor and 8-bit ADC
  • –40 to +85 °C temperature range
  • Integrated voltage regulators
  • Frequency hopping capability
  • On-chip crystal tuning
Dimensions: 16 x 16mm (0.63 x 0.63 in)
Quantity
Price
1 – 9$11.49
10 – 99$10.88
100 +$9.97

  (Assembled and Tested)  
  WRL10153  
  3  
 
..........................
Click here for specs, downloads, and more pictures.
Bluetooth Modem - BlueSMiRF Gold
 
Description: The BlueSMiRF is the latest Bluetooth wireless serial cable replacement ! These modems work as a serial (RX/TX) pipe. Any serial stream from 9600 to 115200bps can be passed seamlessly from your computer to your target. We've tested these units successfully over open air at 350ft (106m)!

The remote unit can be powered from 3.3V up to 6V for easy battery attachment. All signal pins on the remote unit are 3V-6V tolerant. No level shifting is required. Do not attach this device directly to a serial port. You will need an RS232 to TTL converter circuit if you need to attach this to a computer.

Unit comes without a connector. Please see related male and female pins below.

Specifications:
  • FCC Approved Class 1 Bluetooth Radio Modem
  • Extremely small radio - 0.15x0.6x1.9"
  • Very robust link both in integrity and transmission distance (100m) - no more buffer overruns!
  • Low power consumption : 25mA avg
  • Hardy frequency hopping scheme - operates in harsh RF environments like WiFi, 802.11g, and Zigbee
  • Encrypted connection
  • Frequency: 2.4~2.524 GHz
  • Operating Voltage: 3.3V-6V
  • Serial communications: 2400-115200bps
  • Operating Temperature: -40 ~ +70C
  • Built-in antenna
Dimensions: 51.5x15.8x5.6mm
Quantity
Price
1 – 9$62.99
10 – 99$58.50
100 +$56.55

  (Assembled and Tested)  
  WRL00582  
  3  
 
..........................
Click here for specs, downloads, and more pictures.
XBee 1mW Chip Antenna
 
Description: This is the very popular 2.4GHz XBee module from Digi (formally Maxstream). These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.

Features:
  • 3.3V @ 50mA
  • 250kbps Max data rate
  • 1mW output (+0dBm)
  • 300ft (100m) range
  • Built-in antenna
  • Fully FCC certified
  • 6 10-bit ADC input pins
  • 8 digital IO pins
  • 128-bit encryption
  • Local or over-air configuration
  • AT or API command set
Quantity
Price
1 – 9$24.55
10 – 99$22.80
100 +$22.04

  (Assembled and Tested)  
  WRL08664  
  5  
 
..........................
Click here for specs, downloads, and more pictures.
XBee 1mW Wire Antenna
 
Description: This is the very popular 2.4GHz XBee module from Digi (formally Maxstream). These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.

Features:
  • 3.3V @ 50mA
  • 250kbps Max data rate
  • 1mW output (+0dBm)
  • 300ft (100m) range
  • Wire antenna
  • Fully FCC certified
  • 6 10-bit ADC input pins
  • 8 digital IO pins
  • 128-bit encryption
  • Local or over-air configuration
  • AT or API command set
Quantity
Price
1 – 9$25.44
10 – 99$23.63
100 +$22.84

  (Assembled and Tested)  
  WRL08665  
  3  
 
..........................
Click here for specs, downloads, and more pictures.
Xbee 1mW U.FL Connection
 
Description: This is the very popular 2.4GHz XBee module from Digi (formally Maxstream). These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.

Features:
  • 3.3V @ 50mA
  • 250kbps Max data rate
  • 1mW output (+0dBm)
  • 300ft (100m) range
  • Built-in antenna
  • Fully FCC certified
  • 6 10-bit ADC input pins
  • 8 digital IO pins
  • 128-bit encryption
  • Local or over-air configuration
  • AT or API command set
Quantity
Price
1 – 9$24.55
10 – 99$22.80
100 +$22.04

  (Assembled and Tested)  
  WRL08666  
  2  
 
..........................
Click here for specs, downloads, and more pictures.
XBee Explorer USB
 
Description: This is a simple to use, USB to serial base unit for the XBee line. This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version. Plug the unit into the XBee Explorer, attach a mini USB cable, and you will have direct access to the serial and programming pins on the XBee unit. You get the red board only. XBee modules sold below.

Note:As of August 2010, all new boards now include a MIC5219 voltage regulator which is good for 500mA.
Quantity
Price
1 – 9$24.71
10 – 99$22.95
100 +$22.19

  (Assembled and Tested)  
  WRL08687  
  5  
 
..........................
Click here for specs, downloads, and more pictures.
XBee Pro 60mW Chip Antenna
 
Description: This is the very popular 2.4GHz XBee XBP24-ACI-001 module from Digi (formally Maxstream). The Pro series have the same pinout and command set of the basic series with an increase output power of 60mW! These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.

Features:
  • 3.3V @ 215mA
  • 250kbps Max data rate
  • 60mW output (+18dBm)
  • 1 mile (1500m) range
  • Built-in antenna
  • Fully FCC certified
  • 6 10-bit ADC input pins
  • 8 digital IO pins
  • 128-bit encryption
  • Local or over-air configuration
  • AT or API command set
Quantity
Price
1 – 9$46.51
10 – 99$43.20
100 +$41.76

  (Assembled and Tested)  
  WRL08690  
  5  
 
..........................
Click here for specs, downloads, and more pictures.
XBee Pro 60mW U.FL Connection - Series 1
 
Description: This is the very popular 2.4GHz XBee XBP24-AUI-001 module from Digi (formally Maxstream). The Pro series have the same pinout and command set of the basic series with an increase output power of 60mW! These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.

If you are looking for distance, this module combined with a large 2.4GHz antenna is just about the longest range there is. Better performance than the chip antenna because of the ability to add a higher-sensitivity antenna.

Features:
  • 3.3V @ 215mA
  • 250kbps Max data rate
  • 60mW output (+18dBm)
  • 1 mile (1500m) range
  • Fully FCC certified
  • 6 10-bit ADC input pins
  • 8 digital IO pins
  • 128-bit encryption
  • Local or over-air configuration
  • AT or API command set
Quantity
Price
1 – 9$46.51
10 – 99$43.20
100 +$41.76

  (Assembled and Tested)  
  WRL08710  
  3  
 
..........................
Click here for specs, downloads, and more pictures.
XBee Pro 60mW Wire Antenna - Series 1
 
Description: This is the very popular 2.4GHz XBee XBP24-AWI-001 module from Digi (formally Maxstream). The Pro series have the same pinout and command set of the basic series with an increase output power of 60mW! These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.

Features:
  • 3.3V @ 215mA
  • 250kbps Max data rate
  • 60mW output (+18dBm)
  • 1 mile (1500m) range
  • Built-in antenna
  • Fully FCC certified
  • 6 10-bit ADC input pins
  • 8 digital IO pins
  • 128-bit encryption
  • Local or over-air configuration
  • AT or API command set
Quantity
Price
1 – 9$46.51
10 – 99$43.20
100 +$41.76

  (Assembled and Tested)  
  WRL08742  
  3  
 
..........................
Click here for specs, downloads, and more pictures.
RF Link Transmitter - 315MHz
 
CLOSEOUT ITEM - WHILE STOCK LASTS.


Description: This is only the 315MHz transmitter. This will work with the RF Links at 315MHz at either baud rate. Only one 315MHz transmitter will work within the same location.

This wireless data is the easiest to use, lowest cost RF link we have ever seen! Use these components to transmit position data, temperature data, even current program register values wirelessly to the receiver. These modules have up to 500 ft range in open space. The transmitter operates from 2-12V. The higher the Voltage, the greater the range - see range test data in the documents section.

We have used these modules extensively and have been very impressed with their ease of use and direct interface to an MCU. The theory of operation is very simple. What the transmitter 'sees' on its data pin is what the receiver outputs on its data pin. If you can configure the UART module on a PIC, you have an instant wireless data connection. The typical range is 500ft for open area.

This is an ASK transmitter module with an output of up to 8mW depending on power supply voltage. The transmitter is based on SAW resonator and accepts digital inputs, can operate from 2 to 12 Volts-DC, and makes building RF enabled products very easy.

Features:
  • 315  MHz Transmitter Operation
  • 500 Ft. Range - Dependent on Transmitter Power Supply
  • 2400 or 4800bps transfer rate
  • Low cost
  • Extremely small and light weight
Quantity
Price
1 – 9$3.78
10 – 99$3.58
100 +$3.28

  (Assembled and Tested)  
  WRL08945  
  1  
 
..........................
Click here for specs, downloads, and more pictures.
XBee Explorer Regulated
 
The XBee Explorer Regulated takes care of the 3.3V regulation, signal conditioning, and basic activity indicators (Power, RSSI and DIN/DOUT activity LEDs). It translates the 5V signals to 3.3V so that you can connect a 5V (down to 3.3V) system to any XBee module. The board was conveniently designed to mate directly with Arduino Pro boards for wireless bootloading and USB based configuration.
Quantity
Price
1 – 9$9.69
10 – 99$9.18
100 +$8.42

  (Assembled and Tested)  
  WRL09132  
  4  
 
..........................
Click here for specs, downloads, and more pictures.
XBee Explorer Dongle
 
Description: This is the Xbee Explorer Dongle unit for the XBee line. With the Xbee Explorer dongle you can now plug the unit directly into your USB port. No cables needed! This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version.

You get the red board only. XBee modules sold separately.

Add a couple XBees, and a Regulated Explorer and you've got a great gift for that special electronics geek!
Quantity
Price
1 – 9$24.71
10 – 99$22.95
100 +$22.19

  (Assembled and Tested)  
  WRL09819  
  3  
 
..........................
Click here for specs, downloads, and more pictures.
XBee Shield
 
Description: This new revision fixes some minor spacing and labeling issues, but functionality remains the same.The XBee Shield simplifies the task of interfacing an XBee with your Arduino. This board mates directly with an Arduino Pro or USB board, and equips it with wireless communication capabilities using the popular XBee module. This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version. This is SparkFun's own design and is a distant relative to the official XBee Shield from Arduino.

The serial pins (DIN and DOUT) of the XBee are connected through an SPDT switch, which allows you to select a connection to either the UART pins (D0, D1) or any digital pins on the Arduino (D2 and D3 default). Power is taken from the 5V pin of the Arduino and regulated on-board to 3.3VDC before being supplied to the XBee. The shield also takes care of level shifting on the DIN pin of the XBee.

The board also includes LEDs to indicate power and activity on DIN, DOUT, RSSI, and DIO5 pins of the XBee. The Arduino's reset button is brought out on the shield, and a 12x11 grid of 0.1" holes are available for prototyping. The shield does not come with headers installed; we recommend the 6 and 8-pin stackable headers. The XBee module is also not included.

Features:
  • Mounts directly onto your Arduino
  • DIN and DOUT pins of XBee can be connected to either the UART pins or any digital pin on the Arduino (D2 and D3 default)
  • 3.3V power regulation and level shifting on-board
  • 12x11 grid of 0.1" spaced prototyping holes
  • Reset button brought out
  • Power, DIN, DOUT, RSSI and DIO5 indicator LEDs
Quantity
Price
1 – 9$24.23
10 – 99$22.50
100 +$21.75

  (Assembled and Tested)  
  WRL09976  
  3  
 
..........................
Click here for specs and more pictures.
Logic Level Converter
 
Description: If you've ever tried to connect a 3.3V device to a 5V system, you know what a challenge it can be. The logic level converter is a small device that safely steps down 5V signals to 3.3V and steps up 3.3V to 5V. This level converter also works with 2.8V and 1.8V devices. Each level converter has the capability of converting 4 pins on the high side to 4 pins on the low side. Two inputs and two outputs are provided for each side.

Bread board friendly! Can be used with normal serial, I2C, SPI, and any other digital signal. Does not work with an analog signal.

The level converter is very easy to use. The board needs to be powered from the two voltages sources (high voltage and low voltage) that your system is using. High voltage (5V for example) to the 'HV' pin, low voltage (2.8V for example) to 'LV', and ground from the system to the 'GND' pin.

Pins are labeled as Inputs and Outputs. These are relative to the board. A digital one going into the RXI pin on the 5V side will show up on the RXO pin on the 3.3V side as 3.3V. A digital one going into the TXI pin on the 3.3V side will show up on the TXO pin on the 5V side as 5V.

Dimensions: 0.5x0.6"
Quantity
Price
1 – 9$1.90
10 – 99$1.80
100 +$1.65

  (Assembled and Tested)  
  BOB08745  
  6  
 
..........................
Click here for more pictures.
Arduino Uno
 
Arduino is an open-source physical computing platform based on a simple i/o board and a development environment that implements the Processing/Wiring language. Arduino can be used to develop stand-alone interactive objects or can be connected to software on your computer (e.g. Flash, Processing, MaxMSP). The open-source IDE can be downloaded for free (currently for Mac OS X, Windows, and Linux).

This is the new Arduino Uno. In addition to all the features of the previous board, the Uno now uses an ATmega8U2 instead of the FTDI chip. This allows for faster transfer rates, no drivers needed for Linux or Mac (inf file for Windows is needed), and the ability to have the Uno show up as a keyboard, mouse, joystick, etc.

Features
:
  • ATmega328 microcontroller
  • Input voltage - 7-12V
  • 14 Digital I/O Pins (6 PWM outputs)
  • 6 Analog Inputs
  • 32k Flash Memory
  • 16Mhz Clock Speed
Quantity
Price
1 – 9$30.99
10 – 99$28.80
100 +$27.84

  (Assembled and Tested)  
  DEV09950  
  3  
 
..........................
Click here for downloads and more pictures.
Arduino Uno SMD
 
Arduino is an open-source physical computing platform based on a simple i/o board and a development environment that implements the Processing/Wiring language. Arduino can be used to develop stand-alone interactive objects or can be connected to software on your computer (e.g. Flash, Processing, MaxMSP). The open-source IDE can be downloaded for free (currently for Mac OS X, Windows, and Linux).

This is the new Arduino Uno. In addition to all the features of the previous board, the Uno now uses an ATmega8U2 instead of the FTDI chip. This allows for faster transfer rates, no drivers needed for Linux or Mac (inf file for Windows is needed), and the ability to have the Uno show up as a keyboard, mouse, joystick, etc.

Special SMD Version: Because Atmel is moving more and more of their production capacity to surface mount ICs, the DIP packaged ATmega328 is becoming more and more difficult to get. To keep up with demand, we now offer the Arduino Uno with an SMD ATmega328. The board is identical to the PTH version of the Uno, but you won't be able to remove the ATmega328 without some hot-air. This change shouldn't affect most users. Besides - when was the last time you managed to destroy an ATmega328 and needed to repair an Arduino board? Those things are nearly indestructible.

Features
:
  • ATmega328 microcontroller
  • Input voltage - 7-12V
  • 14 Digital I/O Pins (6 PWM outputs)
  • 6 Analog Inputs
  • 32k Flash Memory
  • 16Mhz Clock Speed
Quantity
Price
1 – 9$30.99
10 – 99$28.80
100 +$27.84

  (Assembled and Tested)  
  DEV10356  
  2  
 
This web store and web site powered by NetSuite ecommerce software