Power Driver Shield Kit

Shopping Cart

	Your Cart is Empty
	View Cart

Click links for:

This shield allows you to use a computer power supply (or other power source) to use your Arduino to switch high current. With RFP30N06LE MOSFETS, you can easily control a lot of current directly from your Arduino.

The board provides 6 PWM outputs via screw terminals. Check the datasheet for the MOSFET below for full specifications on how much current this board can handle.This board is a very easy way to start using MOSFETS for your next high current project.

A protection diode has been added to the power input of this version of the board.

Note: If you want to stack another shield on top of this one, you will want to double-up on the stackable headers to clear the MOSFETs.

Quantity	Price
1 – 9	$18.90
10 – 99	$17.55
100 +	$16.97

Skill Level of Item:		Assembled and Tested
Product #		DEV10618
Quantity Available:		3

Tell a Friend

Related items are:

ATmega328 with Arduino Bootloader

Description:The name says it all on this one. An ATmega328 in DIP package, pre-loaded with the Arduino Duemilanove (16MHz) Bootloader. This will allow you to use Arduino code in your custom embedded project without having to use an actual Arduino board.

To get this chip working with Arduino IDE, you will need an external 16MHz crystal or resonator, a 5V supply, and a serial connection. If you are not comfortable doing this, we recommend purchasing the Arduino Uno board that has all of these built into the board.

Atmel's ATMega328 8-Bit Processor in 28 pin DIP package. It's like the ATmega168, with double the flash space. 32K of program space. 23 I/O lines, 6 of which are channels for the 10-bit ADC. Runs up to 20MHz with external crystal. Package can be programmed in circuit. 1.8V to 5V operating voltage!

Note: This contains the bootloader used on the Arduino Duemilanove.

Quantity	Price
1 – 9	$5.70
10 – 99	$5.40
100 +	$4.95

Skill Level of Item:		Assembled and Tested
Product #		DEV09217
Quantity Available:		18

Click here for downloads and more pictures.

Arduino Uno SMD

Arduino is an open-source physical computing platform based on a simple i/o board and a development environment that implements the Processing/Wiring language. Arduino can be used to develop stand-alone interactive objects or can be connected to software on your computer (e.g. Flash, Processing, MaxMSP). The open-source IDE can be downloaded for free (currently for Mac OS X, Windows, and Linux).

This is the new Arduino Uno. In addition to all the features of the previous board, the Uno now uses an ATmega8U2 instead of the FTDI chip. This allows for faster transfer rates, no drivers needed for Linux or Mac (inf file for Windows is needed), and the ability to have the Uno show up as a keyboard, mouse, joystick, etc.

Special SMD Version: Because Atmel is moving more and more of their production capacity to surface mount ICs, the DIP packaged ATmega328 is becoming more and more difficult to get. To keep up with demand, we now offer the Arduino Uno with an SMD ATmega328. The board is identical to the PTH version of the Uno, but you won't be able to remove the ATmega328 without some hot-air. This change shouldn't affect most users. Besides - when was the last time you managed to destroy an ATmega328 and needed to repair an Arduino board? Those things are nearly indestructible.

Features:

ATmega328 microcontroller
Input voltage - 7-12V
14 Digital I/O Pins (6 PWM outputs)
6 Analog Inputs
32k Flash Memory
16Mhz Clock Speed

Quantity	Price
1 – 9	$30.99
10 – 99	$28.80
100 +	$27.84

Skill Level of Item:		Assembled and Tested
Product #		DEV10356
Quantity Available:		1

Starter Kit for Arduino - Flex

Description: The Arduino Starter Kit is a great raw parts re-fill for beginners and weathered professionals alike. This version comes with the new Arduino Uno. Also included is a multitude of inputs, outputs, and sensors to get your workbench back up to par. If you're just getting started with Arduino, we recommend the SparkFun Inventor's Kit that comes with a printed manual.

Included:

Arduino Uno - the latest Arduino USB board, fully assembled and tested.
6' USB A to B cable - USB provides power for up to 500mA (enough for most projects) and is ample length to connect to your desktop or laptop USB port.
Miniature breadboard - Excellent for making circuits and connections off the Arduino. Breadboard may come in various colors.
Male to Male jumper wires - These are high quality wires that allow you to connect the female headers on the Arduino to the components and breadboard.
Flex Sensor - Originally designed for the Nintendo Power Glove, now you too can measure flex!
SoftPot - Measure position along the softpot by looking at the change in resistance. It's like a touch sensitive volume slider.
Photocell - A sensor to detect ambient light. Perfect for detecting when a drawer is opened or when night-time approaches.
Thermistor - A sensor for detecting ambient temperature and temperature changes.
Tri-Color LED - Because everyone loves a blinky. Use this LED to PWM mix any color you need.
Basic LEDs - Light emitting diodes make great general indicators.
Linear trim pot - Also known as a variable resistor, this is a device commonly used to control volume, contrast, and makes a great general user control input.
Buzzer - Make wonderful, brain splitting noises, alarms, and possibly music!
12mm button - Because big buttons are easier to hit.
330 Ohm Resistors - 5 current limiting resistors for LEDs, and strong pull-up resistors.
10k Ohm Resistors - These make excellent pull-ups, pull-downs, and current limiters.

Quantity	Price
1 – 9	$59.76
10 – 99	$55.49
100 +	$53.65

Skill Level of Item:		Assembled and Tested
Product #		DEV10174
Quantity Available:		4

Inventor's Kit for Arduino

Description: zOMG! This kit has it all. It now includes the new Arduino Uno, the fabled baseplate, and all the sensors you can shake a stick at. The SparkFun Inventor's Kit for Arduino is a box of goodies to get the very beginner started with programmable electronics. It includes all the bits you need to build 12 basic circuits, no soldering required! On top of that, we've joined forces with Oomlout to offer a small booklet to get you started. The SIK comes with everything pictured and a 36 page color printed 'starter' guide. The guide will take a complete novice and get them:

Blinking LEDs
Controlling a toy motor
Controlling a servo
Making (bad) music
Responding to buttons
Twisting a volume knob
Detecting ambient light
Reading temperature
Controlling big devices
Mixing LED colors

We believe these to be the building blocks of any electronics project. Once these concepts are mastered, very impressive projects are possible using simple recombinations.

Note: Because Atmel is moving more and more of their production capacity to surface mount ICs, the DIP packaged ATmega328 is becoming more and more difficult to get. To keep up with demand, we now offer the Arduino Uno with an SMD ATmega328. The board is identical to the PTH version of the Uno, but you won't be able to remove the ATmega328 without some hot-air. This change shouldn't affect most users. We have historically seen a very low number of Arduino boards fail, so this should not be an issue. You will get an SMD OR PTH Uno. You do not have a choice. We will use whichever we have on hand. As the supply issues go away, we will have more control over this.

Quantity	Price
1 – 9	$93.67
10 – 99	$87.00
100 +	$84.10

Skill Level of Item:		Assembled and Tested
Product #		KIT10173
Quantity Available:		2

Click here for specs, downloads, and more pictures.

Inventor's Kit for Arduino with Retail Case

Description: This is the 'retail' version of the SparkFun Inventor's Kit (SIK). This version comes with the carrying case seen in the pictures, where the standard version does not. You can buy the case separately though if you wish.
zOMG! This kit has it all. It now includes the new Arduino Uno, the fabled baseplate, and all the sensors you can shake a stick at. This version includes a plastic carrying case to organize all the components. The SparkFun Inventor's Kit for Arduino is a box of goodies to get the very beginner started with programmable electronics. It includes all the bits you need to build 12 basic circuits, no soldering required! On top of that, we've joined forces with Oomlout to offer a small booklet to get you started. The SIK comes with everything pictured and a 36 page color printed 'starter' guide. The guide will take a complete novice and get them:

Blinking LEDs
Controlling a toy motor
Controlling a servo
Making (bad) music
Responding to buttons
Twisting a volume knob
Detecting ambient light
Reading temperature
Controlling big devices
Mixing LED colors

Quantity	Price
1 – 9	$98.52
10 – 99	$91.49
100 +	$88.45

Skill Level of Item:		Assembled and Tested
Product #		RTL10339
Quantity Available:		3

12 KEY KEYBOARD - COMMON OUTPUT - BLISTER-PACKED

Features:

common output
blister-packed

Specifications:

contact rating: 24V DC / 20mA
contact resistance: 200ohm max

Quantity	Price
1 – 9	$4.45
10 – 99	$4.19
100 +	$3.86

Skill Level of Item:		Component or Part
Product #		12KEY
Quantity Available:		26