Register | Log In
 
Your Cart is Empty
View Cart
 
 
LilyPad Vibe BoardDEV11008
Product Number: DEV11008
Click image to enlarge
Description: 
Apply 5V and be shaken by this small, but powerful vibration motor. Works great as an physical indicator without notifying anyone but the wearer. This version uses a surface mount motor which is less likely to be damaged during use.

LilyPad is a wearable technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable!

Dimensions:
  • 20mm outer diameter
  • Thin 0.8mm PCB

Product #: DEV11008

Skill Level: Assembled and Tested

Additional Details:
Click links for:

Leave a Comment or Ask a Question:

FireTube


Documentation and Downloads:

Leave a Comment or Ask a Question:

Quantity:  

3  
in stock and available for immediate shipment.

 
Click here for more details
LilyPad Arduino 328 Main Board
Click here for specs, downloads, and more pictures.
Description: This is LilyPad Arduino - the main board consisting of an ATmega328 with the Arduino bootloader and a minimum number of external components to keep it as small (and as simple) as possible. Board will run from 2V to 5V. The latest version of the LilyPad supports automatic reset for even easier programming. The back side of the LilyPad is now completely flat! We now use a surface mount programming connector to keep the header from poking through.

This version of the LilyPad now uses the new ATmega328 at 8MHz. Arduino 0016 supports the Arduino Pro Mini 328/8MHz. Use this setting when using this new LilyPad 328.

LilyPad is a wearable e-textile technology developed by Leah Buechley. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable!

Dimensions:
  • 50mm outer diameter
  • Thin 0.8mm PCB
Read More
  Assembled and Tested  
  DEV09266  
  4  
Quantity:  

LilyPad Buzzer
Click here for specs, downloads, and more pictures.
Description: This is a small buzzer for the LilyPad system. Use 2 I/O pins on the LilyPad main board and create different noises based on the different frequency of I/O toggling. Loud enough to hear inside a pocket but not obtrusively loud.
Please note: This is an inductive buzzer meaning that is will act as a short to ground if you are not actively driving it. We recommend you put both I/O pins to low (0V) when the buzzer is not used.

LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable!

Dimensions:
  • 20mm outer diameter
  • Thin 0.8mm PCB
Read More
  Assembled and Tested  
  DEV08463  
  5  
Quantity:  

LilyPad Light Sensor
Click here for specs and more pictures.
Description: This is a simple to use light sensor that outputs an analog value from 0 to 5V. With exposure to daylight, this sensor will output 5V. Covering the sensor with your hand, the sensor will output 0V. In a normal indoor lighting situation, the sensor will output from 1 to 2V.

LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable!

Dimensions:
  • 20mm outer diameter
  • Thin 0.8mm PCB
Read More
  Assembled and Tested  
  DEV08464  
  1  
Quantity:  

LilyPad Power Supply
Click here for specs, downloads, and more pictures.
Description: A small, but mighty power supply. This board was designed to be as small and inconspicuous as possible. Pop in a AAA battery, flip the power switch, and you will have a 5V supply to power your LilyPad network. Good up to 100mA. Short circuit protected.
This board has AAA battery clips but can use an input from 1.2V to 5V. Our lithium polymer batteries are a good, rechargable alternative.

LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable - but be sure to remove the battery!

Dimensions:
  • 56x26mm
  • Thin 0.8mm PCB
Read More
  Assembled and Tested  
  DEV11259  
  3  
Quantity: