Arduino Uno (version 1)

Shopping Cart

	Your Cart is Empty
	View Cart

Click links for:

ATmega328 microcontroller
Input voltage - 7-12V
14 Digital I/O Pins (6 PWM outputs)
6 Analog Inputs
32k Flash Memory
16Mhz Clock Speed

Quantity	Price
1 – 9	$27.46
10 – 99	$25.49
100 +	$24.65

Skill Level of Item:		Assembled and Tested
Product #		DEV09950
Quantity Available:		62

Tell a Friend

Related items are:

ATmega328 with Arduino Bootloader

Description:The name says it all on this one. An ATmega328 in DIP package, pre-loaded with the Arduino Duemilanove (16MHz) Bootloader. This will allow you to use Arduino code in your custom embedded project without having to use an actual Arduino board.

To get this chip working with Arduino IDE, you will need an external 16MHz crystal or resonator, a 5V supply, and a serial connection. If you are not comfortable doing this, we recommend purchasing the Arduino Uno board that has all of these built into the board.

Atmel's ATMega328 8-Bit Processor in 28 pin DIP package. It's like the ATmega168, with double the flash space. 32K of program space. 23 I/O lines, 6 of which are channels for the 10-bit ADC. Runs up to 20MHz with external crystal. Package can be programmed in circuit. 1.8V to 5V operating voltage!

Note: This contains the bootloader used on the Arduino Duemilanove.

Quantity	Price
1 – 9	$5.70
10 – 99	$5.40
100 +	$4.95

Skill Level of Item:		Assembled and Tested
Product #		DEV09217
Quantity Available:		18

..........................

Click here for downloads and more pictures.

Arduino Uno SMD

Arduino is an open-source physical computing platform based on a simple i/o board and a development environment that implements the Processing/Wiring language. Arduino can be used to develop stand-alone interactive objects or can be connected to software on your computer (e.g. Flash, Processing, MaxMSP). The open-source IDE can be downloaded for free (currently for Mac OS X, Windows, and Linux).

This is the new Arduino Uno. In addition to all the features of the previous board, the Uno now uses an ATmega8U2 instead of the FTDI chip. This allows for faster transfer rates, no drivers needed for Linux or Mac (inf file for Windows is needed), and the ability to have the Uno show up as a keyboard, mouse, joystick, etc.

Special SMD Version: Because Atmel is moving more and more of their production capacity to surface mount ICs, the DIP packaged ATmega328 is becoming more and more difficult to get. To keep up with demand, we now offer the Arduino Uno with an SMD ATmega328. The board is identical to the PTH version of the Uno, but you won't be able to remove the ATmega328 without some hot-air. This change shouldn't affect most users. Besides - when was the last time you managed to destroy an ATmega328 and needed to repair an Arduino board? Those things are nearly indestructible.

Features:

ATmega328 microcontroller
Input voltage - 7-12V
14 Digital I/O Pins (6 PWM outputs)
6 Analog Inputs
32k Flash Memory
16Mhz Clock Speed

Quantity	Price
1 – 9	$30.99
10 – 99	$28.80
100 +	$27.84

Skill Level of Item:		Assembled and Tested
Product #		DEV10356
Quantity Available:		1

..........................

Click here for specs, downloads, and more pictures!

Arduino Uno - R3

Description: This is the new Arduino Uno R3. In addition to all the features of the previous board, the Uno now uses an ATmega16U2 instead of the 8U2 found on the Uno (or the FTDI found on previous generations). This allows for faster transfer rates and more memory. No drivers needed for Linux or Mac (inf file for Windows is needed and included in the Arduino IDE), and the ability to have the Uno show up as a keyboard, mouse, joystick, etc.

The Uno R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. The Uno R3 works with all existing shields but can adapt to new shields which use these additional pins.

Arduino is an open-source physical computing platform based on a simple i/o board and a development environment that implements the Processing/Wiring language. Arduino can be used to develop stand-alone interactive objects or can be connected to software on your computer (e.g. Flash, Processing, MaxMSP). The open-source IDE can be downloaded for free (currently for Mac OS X, Windows, and Linux).

Note: The Arduino Uno R3 requires the Arduino 1.0 drivers folder in order to install properly on some computers. We have tested and confirmed that the R3 can be programmed in older versions of the IDE. However, the first time using the R3 on a new computer, you will need to have Arduino 1.0 installed on that machine. If you are interested in reading more about the changes to the IDE, check out the official Arduino 1.0 Release Notes!

Read More...

Quantity	Price
1 – 9	$29.85
10 – 99	$27.72
100 +	$26.80

Skill Level of Item:		Assembled and Tested
Product #		DEV11021
Quantity Available:		5

..........................

Arduino Leonardo with Headers

Description: Arduino is an open-source physical
computing platform based on a simple i/o board and a development
environment that implements the Processing/Wiring
language. Arduino can be used to develop stand-alone interactive
objects or can be connected to software on your computer (e.g. Flash,
Processing, MaxMSP). The open-source IDE can be downloaded for free (currently for Mac OS X, Windows, and Linux).

Quantity	Price
1 – 9	$24.87
10 – 99	$23.99
100 +	$22.33

Skill Level of Item:		Assembled and Tested
Product #		DEV11286
Quantity Available:		3

..........................

Starter Kit for Arduino - Flex

Description: The Arduino Starter Kit is a great raw parts re-fill for beginners and weathered professionals alike. This version comes with the new Arduino Uno. Also included is a multitude of inputs, outputs, and sensors to get your workbench back up to par. If you're just getting started with Arduino, we recommend the SparkFun Inventor's Kit that comes with a printed manual.

Included:

Arduino Uno - the latest Arduino USB board, fully assembled and tested.
6' USB A to B cable - USB provides power for up to 500mA (enough for most projects) and is ample length to connect to your desktop or laptop USB port.
Miniature breadboard - Excellent for making circuits and connections off the Arduino. Breadboard may come in various colors.
Male to Male jumper wires - These are high quality wires that allow you to connect the female headers on the Arduino to the components and breadboard.
Flex Sensor - Originally designed for the Nintendo Power Glove, now you too can measure flex!
SoftPot - Measure position along the softpot by looking at the change in resistance. It's like a touch sensitive volume slider.
Photocell - A sensor to detect ambient light. Perfect for detecting when a drawer is opened or when night-time approaches.
Thermistor - A sensor for detecting ambient temperature and temperature changes.
Tri-Color LED - Because everyone loves a blinky. Use this LED to PWM mix any color you need.
Basic LEDs - Light emitting diodes make great general indicators.
Linear trim pot - Also known as a variable resistor, this is a device commonly used to control volume, contrast, and makes a great general user control input.
Buzzer - Make wonderful, brain splitting noises, alarms, and possibly music!
12mm button - Because big buttons are easier to hit.
330 Ohm Resistors - 5 current limiting resistors for LEDs, and strong pull-up resistors.
10k Ohm Resistors - These make excellent pull-ups, pull-downs, and current limiters.

Quantity	Price
1 – 9	$59.76
10 – 99	$55.49
100 +	$53.65

Skill Level of Item:		Assembled and Tested
Product #		DEV10174
Quantity Available:		4

..........................

Inventor's Kit for Arduino

Description: zOMG! This kit has it all. It now includes the new Arduino Uno, the fabled baseplate, and all the sensors you can shake a stick at. The SparkFun Inventor's Kit for Arduino is a box of goodies to get the very beginner started with programmable electronics. It includes all the bits you need to build 12 basic circuits, no soldering required! On top of that, we've joined forces with Oomlout to offer a small booklet to get you started. The SIK comes with everything pictured and a 36 page color printed 'starter' guide. The guide will take a complete novice and get them:

Blinking LEDs
Controlling a toy motor
Controlling a servo
Making (bad) music
Responding to buttons
Twisting a volume knob
Detecting ambient light
Reading temperature
Controlling big devices
Mixing LED colors

We believe these to be the building blocks of any electronics project. Once these concepts are mastered, very impressive projects are possible using simple recombinations.

Note: Because Atmel is moving more and more of their production capacity to surface mount ICs, the DIP packaged ATmega328 is becoming more and more difficult to get. To keep up with demand, we now offer the Arduino Uno with an SMD ATmega328. The board is identical to the PTH version of the Uno, but you won't be able to remove the ATmega328 without some hot-air. This change shouldn't affect most users. We have historically seen a very low number of Arduino boards fail, so this should not be an issue. You will get an SMD OR PTH Uno. You do not have a choice. We will use whichever we have on hand. As the supply issues go away, we will have more control over this.

Quantity	Price
1 – 9	$93.67
10 – 99	$87.00
100 +	$84.10

Skill Level of Item:		Assembled and Tested
Product #		KIT10173
Quantity Available:		2

..........................

Inventor's Kit for Arduino with Retail Case

Description: This is the 'retail' version of the SparkFun Inventor's Kit (SIK). This version comes with the carrying case seen in the pictures, where the standard version does not. You can buy the case separately though if you wish.
zOMG! This kit has it all. It now includes the new Arduino Uno, the fabled baseplate, and all the sensors you can shake a stick at. This version includes a plastic carrying case to organize all the components. The SparkFun Inventor's Kit for Arduino is a box of goodies to get the very beginner started with programmable electronics. It includes all the bits you need to build 12 basic circuits, no soldering required! On top of that, we've joined forces with Oomlout to offer a small booklet to get you started. The SIK comes with everything pictured and a 36 page color printed 'starter' guide. The guide will take a complete novice and get them:

Blinking LEDs
Controlling a toy motor
Controlling a servo
Making (bad) music
Responding to buttons
Twisting a volume knob
Detecting ambient light
Reading temperature
Controlling big devices
Mixing LED colors

Quantity	Price
1 – 9	$98.52
10 – 99	$91.49
100 +	$88.45

Skill Level of Item:		Assembled and Tested
Product #		RTL10339
Quantity Available:		3

..........................

Arduino Pro Mini 328 - 5V/16MHz

Description: It's blue! It's thin (0.8mm)! It's the Arduino Pro Mini! SparkFun's minimal design approach to Arduino. This is a 5V Arduino running the 16MHz bootloader (select 'Arduino Duemilanove w/ 328' within the Arduino software). Arduino Pro Mini does not come with connectors populated so that you can solder in any connector or wire with any orientation you need. We recommend first time Arduino users start with the Duemilanove. It's a great board that will get you up and running quickly. The Arduino Pro series is meant for users that understand the limitations of system voltage (5V), lack of connectors, and USB off board.

We really wanted to minimize the cost of an Arduino. The Arduino Pro Mini is like the Arduino Mini (same pin out) but to keep the cost low, we used all SMD components, made it two layer, etc. This board connects directly to the FTDI Basic Breakout board and supports auto-reset. The Arduino Pro Mini also works with the FTDI cable but the FTDI cable does not bring out the DTR pin so the auto-reset feature will not work.

The latest and greatest version of this board (this version) breaks out the ADC6 and ADC7 pins as well as adds footprints for optional I2C pull-up resistors! We also took the opportunity to slap it with the OSHW logo.

Note: A portion of this sale is given back to Arduino LLC to help fund continued development of new tools and new IDE features.

This replaces DEV09218.

Quantity	Price
1 – 9	$18.65
10 – 99	$17.33
100 +	$16.75

Skill Level of Item:		Assembled and Tested
Product #		DEV11113
Quantity Available:		6

..........................

Arduino Pro Mini 328 - 3.3V/8MHz

Description: It's blue! It's thin (0.8mm)! It's the Arduino Pro Mini! SparkFun's minimal design approach to Arduino. This is a 3.3V Arduino running the 8MHz bootloader (select 'Arduino Duemilanove w/ 328' within the Arduino software). Arduino Pro Mini does not come with connectors populated so that you can solder in any connector or wire with any orientation you need. We recommend first time Arduino users start with the Duemilanove. It's a great board that will get you up and running quickly. The Arduino Pro series is meant for users that understand the limitations of system voltage (3.3V), lack of connectors, and USB off board.

We really wanted to minimize the cost of an Arduino. The Arduino Pro Mini is like the Arduino Mini (same pin out) but to keep the cost low, we used all SMD components, made it two layer, etc. This board connects directly to the FTDI Basic Breakout board and supports auto-reset. The Arduino Pro Mini also works with the FTDI cable but the FTDI cable does not bring out the DTR pin so the auto-reset feature will not work.

Quantity	Price
1 – 9	$18.65
10 – 99	$17.33
100 +	$16.75

Skill Level of Item:		Assembled and Tested
Product #		DEV09220
Quantity Available:		12

..........................

Arduino ProtoShield Kit

Description: Riding on the waves of the very popular Arduino USB board is this small prototyping shield. Originally spawned with collaboration between the folks at SFE and ITP @ NYU, the ProtoShield mates with the Arduino USB board and gives the user a small soldering area, two general LEDs, access to a BlueSMiRF socket, a general pushbutton switch, and most important of all - the Arduino reset switch is brought to the top level. A ProtoShield quickstart guide is available!

This comes in kit form and must be soldered together by the end user. Please note - we do not ship assembly instructions, but you can find a big, clean photographed assembly guide here! There are a few tutorials on assembly listed below. All soldering is through-hole (relatively easy) but always check your component orientation before soldering!

The kit is pictured with the bread-board option. We highly recommend this breadboard! After you click on the picture, see the related items below for all the colorful options of breadboards you have.

Kit Includes:

1x ProtoShield bare PCB
2x Stackable Headers 6-pin
2x Stackable Headers 8-pin
2x 5mm Basic Yellow LEDs
2x 330 Ohm resistors
1x 10k resistor
2x Momentary push buttons
2x 0.1uF Ceramic Capacitors

Quantity	Price
1 – 9	$14.54
10 – 99	$13.50
100 +	$13.05

Skill Level of Item:		Kit - Basic Soldering Required
Product #		DEV07914
Quantity Available:		24

..........................

Real Time Clock Module

Description: This a custom designed module for the DS1307 Real Time Clock. The module comes fully assembled and pre-programmed with the current time of our supplier - MST. The included Lithium coin cell battery (CR1225 41mAh) will run the module for a minimum of 9 years (17 years typical) without external 5V power. The DS1307 is accessed via the I2C protocol. We've written a test-bed to program the modules. This test-bed code should give you some insight on how to interface the module to any microcontroller using our example software I2C and BCD routines.

Features:

Two wire I2C interface
Hour : Minutes : Seconds AM/PM
Day Month, Date - Year
Leap year compensation
Accurate calendar up to year 2100
Battery backup included
1Hz output pin
56 Bytes of Non-volatile memory available to user

Quantity	Price
1 – 9	$14.44
10 – 99	$13.68
100 +	$12.54

Skill Level of Item:		Assembled and Tested
Product #		BOB00099
Quantity Available:		2

..........................

8 Relay 8 Analog USB IO Controller 12 V

Description: The KTA-225 is a USB or RS485 controlled IO module for interfacing PCs to real world applications, such as controlling lights and sprinkler systems, reading sensors and monitoring switches or analog signals. The Relays are capable of switching up to 5A at 250VAC, 10A at 120VAC and 10A at 24VDC but the PCB tracks will only handle up to about 5A. A simple ASCII protocol allows control from Windows/Mac/Linux using either USB Virtual COM drivers or RS485. Additionally, multiple devices can be connected to one RS485 bus, allowing control of many devices from one USB port.

The KTA-225 has relays with 12 V DC coils and requires an 9 to 15 V DC supply.

This controller is based on the hardware of the KTA-223 controller, but the number of analog inputs has been increased at the cost of the digital inputs. It can be programmed as a stand-alone controller using the free, open source Arduino environment. Internally, the controller is “shield compatible”, allowing the use of many extension boards designed for the Arduino Deumilanove. As shipped the controller is loaded with a sketch or program that receives simple commands over the USB or RS485 serial port and switches relays or responds with the status of the analog inputs.

Multiple controllers can be connected to one or more PCs in an RS485 network. Each controller can be assigned an address and will respond to commands addressed to them.

Features:

8 Relay Outputs 5A 250VAC
8 Analog Inputs (10 bit)
Connections via Pluggable Screw Terminals
0-5V 0-3.3V or 0-20mA Analog Inputs, Jumper Selectable
5A Relay Switching
Power Indicator LED
All enclosed in Professional looking plastic case
Arduino Compatible
Accepts Arduino Shields (Ethernet / XBee)
USB Virtual Serial Port or RS485 Input
Easily connect multiple units far apart by RS485

Quantity	Price
1 – 9	$152.62
10 – 99	$141.75
100 +	$137.03

Skill Level of Item:		Assembled and Tested
Product #		KTA-225
Quantity Available:		3