IR Cut-switch Device 5V (Device B)

Shopping Cart

	Your Cart is Empty
	View Cart

Click here for Data Sheet

Driver board wiring diagram

IR cut filters are great for day time images, because the sunlight does not cause a pink hue in the image. However they do not work at night because it blocks out light from an IR light illuminator. The same it true in reverse, without a IR cut filter the night time images turn out very good but the daytime images have a pink discoloration. This cut switch allows the IR filter to be turned on and off. The IR Cut Switch filters out intensive light to create more beautiful and natural image color in either day or night.

NOTE: Comes with driver board.

Rated Current: 0.556A (AT input 5.0V)
Power Current: 2.78w (5.0 DCV Coil)
DC Resistance: Excite resistance 9Ω±10% (at 20℃)
Operating Voltage: Close → Open : 5.0V;200ms
   Open → Close : 5.0V;200ms.
Movable Temperature Range: -5℃~+50℃
Storage Temperature Range: -20℃~+60℃
Dimension: 27.55X27.5X10.6mm
AR Glass: AR Glass Specification:
   Glass shape:8.4*7.6mm(t=0.40mm)
   Wave Length(nm):400~1100nm
   Transmission(%):T>93%

Blue Glass: Blue Glas Specification:
   Glass shape:8.4*7.6mm(t=0.55mm)
   Wave Length(nm):625±10nm
   Transmission(%):T=50%

Quantity	Price
1 – 9	$24.81
10 – 99	$23.04
100 +	$22.27

Skill Level of Item:		Assembled and Tested
Product #		BB271
Quantity Available:		15

Tell a Friend

Related items are:

Fused silica (JGS2) 0.5inch x 0.5inch

Thickness = 0.080inch (~2mm)

These cut filters are an insert lens for the cameras; if you remove the 2 screws that attach the lens to the pcb, they can be installed and fit directly into the camera. The filters have a lightpass at about 860nm and are designed to work with IR LEDs emitting at 860nm. This allows the cameras to work during daylight and at night using IR.

Quantity	Price
1 – 9	$5.25
10 – 99	$4.75
100 +	$3.75

Skill Level of Item:		Component or Part
Product #		JGS2
Quantity Available:		362

Click here for specs, downloads, and more pictures.

IR Cut-switch Device SH-B

Specifications:

filter size:ψ8.0mm
rated current:0.090A（3.5-5V）
life:100,000 time min
DC Resistance:Excite resistance 57± 5Ω(at 20°c)
store temperature range:-20°c To+60°c For72h
movable:-10°c To+50°c
size:30.5×25.6×5.5mm

Quantity	Price
1 – 9	$24.81
10 – 99	$23.04
100 +	$22.27

Skill Level of Item:		Assembled and Tested
Product #		SHBIRC
Quantity Available:		25

f6.0mm F1.6 Lens ONLY - as found on C328/C329 camera (BW) (no IR cut filter)

PLEASE NOTE: this is only the lens (NO HOLDER). Lens specs: F/No 1.6 f= 6.0mm FOV = 36 deg diagonal IR cut filter : None (BB224)

Quantity	Price
1 – 9	$10.95
10 – 99	$9.95
100 +	$8.95

Skill Level of Item:		Component or Part
Product #		BB224L
Quantity Available:		11

Preamplifier

A preamplifier to use with an electret or other microphone to boost the signal before feeding into an amplifier. Simple and easy to build. PCB Size: 1.75" x 1.25". Power supply: 6 to 12VDC (Electret microphone Included)

Quantity	Price
1 – 9	$13.68
10 – 99	$12.96
100 +	$11.88

Skill Level of Item:		Kit - Basic Soldering Required
Product #		CPS98
Quantity Available:		27

You might also consider these items:

Preamplifier

Quantity	Price
1 – 9	$13.68
10 – 99	$12.96
100 +	$11.88

f6.0mm F1.6 Lens ONLY - as found on C328/C329 camera (BW) (no IR cut filter)

PLEASE NOTE: this is only the lens (NO HOLDER). Lens specs: F/No 1.6 f= 6.0mm FOV = 36 deg diagonal IR cut filter : None (BB224)

Quantity	Price
1 – 9	$10.95
10 – 99	$9.95
100 +	$8.95

f6.0mm F1.6 Lens & Holder + screws - as found on C328/C329 camera (BW) (no IR cut filter)

PLEASE NOTE: this is the lens & holder + screws. Lens specs: f= 6.0mm F/No 1.6 FOV = 36 deg diagonal IR cut filter : None (BB224)

Quantity	Price
1 – 9	$10.95
10 – 99	$9.95
100 +	$8.95

Skill Level of Item:		Partially Assembled
Product #		BB224
Quantity Available:		11