KC7789M PIR Sensor Module with lens -F

Shopping Cart

	Your Cart is Empty
	View Cart

Full Documentation in pdf format

Click here for a schematic when using this PIR with a relay.

KC7789M is a very small size PIR sensor module with built-in amplifier and logic circuit. The heart of the module is highly reliable PIR controller KC778B. The PIR sensor can be manufacturer specified. The detection angle and distance dependence on the lens used.

PLEASE NOTE: Cap Fresnel lens version F included.

Features:

Ultra small size for unlimited application
Built-in amplifier to provide TTL output signal
High sensitivity with special noise cancellation design
High immunity to RFI and line noise
Signal will not output within 25 sec when power up
Signal output is 0.5sec min
Low operation current
3-wire cable of 70mm

Quantity	Price
1 – 9	$15.96
10 – 99	$15.12
100 +	$13.86

Skill Level of Item:		(Assembled and Tested)
Product #		KC7789M-F
Quantity Available:		5

Tell a Friend

Related items are:

Dual HI / LO Switching Relay Board

The kit is based around the ULN2003A IC, a 7-channel high voltage, high current relay driver. The inputs are TTL compatible so they can be connected to 5V. LO 0-0.8VDC. HI 2.4V - 12VDC. Operating voltage: 12V DC. The relay will be operated when either the LO input is low (0 – 0.8V) or the HI input is high (2.4V – 12V.). Two 12V relays, coil resistance 400 ohm are used. It is rated to switch 250VAC at 12A. However, because of the PCB track thickness and width we do not recommend using the relay to switch more than 5A. PCB size: 2 3/4"x1 3/4"

Quantity	Price
1 – 9	$14.82
10 – 99	$14.04
100 +	$12.87

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS156
Quantity Available:		12

..........................

Click here for detailed specs and larger picture.

KC7789M PIR Sensor Module with lens -C

Ultra small size for unlimited application
Built-in amplifier to provide TTL output signal
High sensitivity with special noise cancellation design
High immunity to RFI and line noise
Signal will not output within 25 sec when power up
Signal output is 0.5sec min
Low operation current
3-wire cable of 70mm

Quantity	Price
1 – 9	$15.96
10 – 99	$15.12
100 +	$13.86

Skill Level of Item:		(Assembled and Tested)
Product #		KC7789M-C
Quantity Available:		5

..........................

KC778B Pir Controller Chip SOP

(BB055)

Quantity	Price
1 – 9	$3.75
10 – 99	$2.95
100 – 999	$2.65
1000 – 9999	$2.45
10000 – 99999	$2.35
100000 +	$2.25

Skill Level of Item:		(Component or Part)
Product #		BB055
Quantity Available:		22

..........................

KC778B Pir Controller Chip PDIP

Closeout item. Limited Qty available.

(When the last of this PDIP version is sold we will still be carrying the surface mounted version (SOP) please see item # BB055 in this regard.)

Price: $3.75

Skill Level of Item:		(Component or Part)
Product #		BB053
Quantity Available:		2

..........................

RE200B-P Pyroelectric Infrared Sensor

(BB083)

Quantity	Price
1 – 9	$1.76
10 – 99	$1.65
100 – 999	$1.45
1000 +	$1.35

Skill Level of Item:		(Component or Part)
Product #		BB083
Quantity Available:		132

..........................

Click here for specs, downloads, and more pictures.

KC7783 PIR Detector Module (Assem and tested)

This is a fully assembled and tested miniature PIR module (KC7783 with KC778B IC) with only 3 connections: Power, Ground & Output. Rated for 4 - 12VDC input power. Uses RE200B PIR sensor. Output is an active high pulse of approx. 0.5 seconds and remains active as long as there is motion. Range up to 10 feet. PCB size: 35mm x 25mm(CPS76)

Quantity	Price
1 – 9	$9.45
10 – 99	$7.95
100 – 999	$6.95
1000 +	$5.45

Skill Level of Item:		(Component or Part)
Product #		CPS76
Quantity Available:		589

..........................

KC7783R PIR Detector Module (Low cost version) (Assem and tested)

Mechanical and electrical specs is the same as the KC7783 except for a lower cost IC (KC778B IC) package used in this KC7783R RoHS compliant: YES. (BB054)

Quantity	Price
1 – 9	$8.98
10 – 99	$7.45
100 – 999	$6.75
1000 – 9999	$5.75
10000 +	$4.95

Skill Level of Item:		(Component or Part)
Product #		BB054
Quantity Available:		585

..........................

KC7786 PIR sensor module 12v (3pin .1in)

This is a fully assembled and tested miniature PIR module (KC7786 with KC778B COB IC) with only 3 connections: Power, Ground & Output (3 pin terminal of standard 0.1 inch pitch). Rated for 12VDC input power. Uses RE200B PIR sensor. Output is an active high pulse of approx. 0.5 seconds and remains active as long as there is motion. Range up to 10 feet. PCB size: 27mm x 27mm (BB043)

Quantity	Price
1 – 9	$11.35
10 – 99	$9.95
100 – 999	$8.95
1000 – 9999	$8.15
10000 +	$7.45

Skill Level of Item:		(Component or Part)
Product #		BB043
Quantity Available:		196

..........................

SPD61 PIR sensor module

This is a fully assembled and tested miniature PIR module. Compact and complete, easy to use PIR Sensor Module for human body detection. Incorporating a Fresnel lens and motion detection IC, suitable for a wide range of supply voltages and with low current drain. Adjustable delay time with high sensitivity and low noise. Output can be standard TTL output signal.

Quantity	Price
1 – 9	$7.41
10 – 99	$7.02
100 – 999	$6.44
1000 – 9999	$6.19
10000 +	$5.99

Skill Level of Item:		(Component or Part)
Product #		SPD61
Quantity Available:		184

You might also consider these items:

KC7789M PIR Sensor Module with lens -C

Ultra small size for unlimited application
Built-in amplifier to provide TTL output signal
High sensitivity with special noise cancellation design
High immunity to RFI and line noise
Signal will not output within 25 sec when power up
Signal output is 0.5sec min
Low operation current
3-wire cable of 70mm

Quantity	Price
1 – 9	$15.96
10 – 99	$15.12
100 +	$13.86

..........................

KC7783 PIR Detector Module (Assem and tested)

Quantity	Price
1 – 9	$9.45
10 – 99	$7.95
100 – 999	$6.95
1000 +	$5.45