RC Servo Motor Controller

Shopping Cart

	Your Cart is Empty
	View Cart

(Full Documentation in pdf Format)

RC Servo Motor Controller
The Ocean Controls RC Servo Motor Controller will control up to 8 servo motors. 4 of the servo motors are controlled by ASCII RS232 serial commands. This can be increased to 8 by the configuration command WRCF.
The form of the serial command is @xx WRSP yyy where xx is the address of the motor and yyy is the position which can vary between 0 and 200.

The other 4 servo motors are controlled by the position of a switch. A switch is connected between the Lx and COM inputs. The user then writes a series of commands to the controller to tell what positions the motor is to move to when the switch is in the OPEN and CLOSED states. The user can also set the rate of movement between the OPEN and CLOSED positions. These variables are automatically saved in EEPROM so that they will not be lost on loss of power.

Power Supply Required: 9 to 24V DC

Finished Dimensions (mm): 78Wx88Lx25H

Quantity	Price
1 – 9	$57.74
10 – 99	$53.63
100 +	$51.84

Skill Level of Item:		(Assembled and Tested)
Product #		BB251
Quantity Available:		2

Tell a Friend

Related items are:

SERIAL CABLE SUBD9 MALE - SUBD9 FEMALE / 6.6 FT

Specifications:

length: 6.6ft

Quantity	Price
1 – 9	$3.42
10 – 99	$3.24
100 +	$2.97

Skill Level of Item:		(Component or Part)
Product #		CW014
Quantity Available:		3

..........................

Unregulated Wall Transformer 120VAC to 12VDC 500mA

Input voltage: 120VAC@60Hz
2-wire
Output voltage: 12VDC
Output current: 500mA
Output plug: 2.5mmID x 5.5mmOD female center positive
(BB204)

Quantity	Price
1 – 9	$13.85
10 – 99	$13.12
100 +	$12.03

Skill Level of Item:		(Assembled and Tested)
Product #		BB204
Quantity Available:		18

..........................

Serial Isolated I/O Module (kit)

8-Relay Module (mains rated - 110V and 250VAC.) An extension of our Kit CPS74 (see next kit), PC controlled 8-Relay Board with 250V switching relays and added features. It is in a plastic case, latched relay operation, 250V relays switched in safety by using Dinkle connectors, and with 4 external inputs. Uses serial port so it can be located over 100 yards from the PC. Comes with case and end panel pieces as shown in the photos. Requires a center positive 9-to-12V DC power supply, at least 500mA, 2.5mm jack. (CPS108)

Quantity	Price
1 – 9	$87.21
10 – 99	$81.00
100 +	$78.30

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS108
Quantity Available:		9

..........................

Upgrade K108 - join two k108 together

CPS108/CPA108 has been a good seller. This kit is to connect two of them together to give 6 Inputs and 16 Relay Outputs. All you have to do is change the firmware, change the front & back panels, and jumper out 2 ICs.
(BB086)

Quantity	Price
1 – 9	$32.95
10 – 99	$30.60
100 +	$29.58

Skill Level of Item:		(Kit - No Soldering Required)
Product #		BB086
Quantity Available:		3

..........................

PC Printer Port Relay Board (Assembled) (version 2)

Do you have an old PC lying around the house which absolutely no one wants? Then you can convert it into a dedicated controller. Communicate with the real world via the parallel printer port on your PC. Simply connect a DB25 straight trough cable from computer to DB25 connector on the relay board. There are 8 relays each capable of switching 12VDC/10A or 240VAC/5A. Each relay has an LED to indicate when it is operated. We provide two sets of complete, stand-alone software to control the relays: one works under DOS so you can write your own batch files to control individual relays, the other works under Windows. Needs 12VDC center positive 2.5mm power supply. PCB Size 6.75" x 2.75" (CPA74)

Quantity	Price
1 – 9	$39.99
10 – 99	$37.80
100 +	$36.54

Skill Level of Item:		(Assembled and Tested)
Product #		CPA74
Quantity Available:		14

..........................

PC Printer Port Relay Board (kit) (version 2)

Do you have an old PC lying around the house which absolutely no one wants? Then you can convert it into a dedicated controller. Communicate with the real world via the parallel printer port on your PC. Simply connect printer cable from computer to Centronics connector on relay board. There are 8 relays each capable of switching 12VDC/10A or 240VAC/5A. Each relay has an LED to indicate when it is operated. We provide two sets of complete, stand-alone software to control the relays: one works under DOS so you can write your own batch files to control individual relays, the other under Windows 3.1. Needs 12VDC center positive 2.5mm power supply. PCB Size 6.75" x 2.75" (version 2) (CPS74)

Quantity	Price
1 – 9	$36.34
10 – 99	$33.75
100 +	$32.63

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS74
Quantity Available:		9

..........................

Parallel port output module (V2) (Assembled)

Once stock on hand is sold out for this item, it will no longer be available as pre-assembled. It will still be available as a kit requiring soldering.

This is our Kit 74V2 but put into a box with top quality Dinkle connectors to the relays. With the rapid progress in computer technology many people now have a surplus computer just gathering dust somewhere. Thus these computers are free to be used as dedicated controllers for a variety of uses: turning on/off lights or other devices around the home, office, laboratory or factory come to mind. All that is needed is the interface to connect it to the real world. (CPA165)

Quantity	Price
1 – 9	$65.41
10 – 99	$60.75
100 +	$58.73

Skill Level of Item:		(Assembled and Tested)
Product #		CPA165
Quantity Available:		4