blogo.jpg
  Register   Log In 
Welcome
My Account
Shopping Cart
Checkout
Contact Us
Specials
New Products
Kits and Modules
Arduino
Components
Consumer & PC
Tools and Meters
Security
App Development
Books
How To
Kits and Modules > Computers >  Returning Customers
click here to log in.
Shopping Cart
Your Cart is Empty
View Cart
 
 

Dual Bidirectional DC Motor Speed Controller

(Full Documentation in pdf Format) 
 

bb250.jpg
NOTE: Maglev fan pictured is not included.

Description:This Motor Speed Controller allows a user to control the speed of up to two DC Motors independently, using an analog 0-5V signal, potentiometers, serial port of a PC or 1-2mS RC Pulse.

Modes of Operation: The BB250 (KTA-198) can be operated in serial, analog or pulse mode. In analog and pulse modes each motor can be operated in unidirectional mode with the 0-5V analog input (or 1-2mS pulse) giving 0-100% PWM and a digital input for direction selection, or in bidirectional mode where the analog or pulse input is responsible for both direction and speed selection. In bidirectional mode 2.5V (or 1.5mS pulse) will give 0% PWM duty, increasing voltage from 2.5V to 5V (or pulses from 1.5 to 2mS) will increase the PWM duty from 0-100% and turn the motor in one direction. Decreasing the voltage from 2.5V to 0V (or pulses from 1.5 to 1mS) will increase the PWM duty from 0-100% and turn the motor in the other direction.

The PWM frequency can be set by a serially command to 10KHz, 1.25KHz and 156Hz. 

The maximum voltage available to run the motor is 50VDC.Current: The IRFZ44 MOSFET can handle 49A; the IRF4905 can handle 74A. However the PCB tracks that run from the MOSFET pins to the screw terminal block can only handle around 10A. When running the motor check the temperature of the MOSFETs to see if heatsinks are required.

Dimensions 75x105x20mm
 
Quantity
Price
1 – 9$82.93
10 – 99$77.03
100 +$74.46

  (Assembled and Tested)  
  BB250  
  2  
 
 
Tell a Friend
 
Click here for larger picture.
SERIAL CABLE SUBD9 MALE - SUBD9 FEMALE / 6.6 FT
 
Specifications:
  • length: 6.6ft
Quantity
Price
1 – 9$3.42
10 – 99$3.24
100 +$2.97

  (Component or Part)  
  CW014  
  3  
 
..........................
Click here for detailed specs.
Unregulated Wall Transformer 120VAC to 12VDC 500mA
 
Input voltage: 120VAC@60Hz
2-wire
Output voltage: 12VDC
Output current: 500mA
Output plug: 2.5mmID x 5.5mmOD female center positive
(BB204)
Quantity
Price
1 – 9$13.85
10 – 99$13.12
100 +$12.03

  (Assembled and Tested)  
  BB204  
  18  
 
..........................
tn_cps108open__2.jpg
Serial Isolated I/O Module (kit)
 
8-Relay Module (mains rated - 110V and 250VAC.) An extension of our Kit CPS74 (see next kit), PC controlled 8-Relay Board with 250V switching relays and added features. It is in a plastic case, latched relay operation, 250V relays switched in safety by using Dinkle connectors, and with 4 external inputs. Uses serial port so it can be located over 100 yards from the PC. Comes with case and end panel pieces as shown in the photos. Requires a center positive 9-to-12V DC power supply, at least 500mA, 2.5mm jack. (CPS108)
Quantity
Price
1 – 9$87.21
10 – 99$81.00
100 +$78.30

  (Kit - Basic Soldering Required)  
  CPS108  
  9  
 
..........................
tn_bb086.jpg
Upgrade K108 - join two k108 together
 
CPS108/CPA108 has been a good seller. This kit is to connect two of them together to give 6 Inputs and 16 Relay Outputs. All you have to do is change the firmware, change the front & back panels, and jumper out 2 ICs.
(BB086)
Quantity
Price
1 – 9$32.95
10 – 99$30.60
100 +$29.58

  (Kit - No Soldering Required)  
  BB086  
  3  
 
..........................
Click here for detailed specs.
PC Printer Port Relay Board (Assembled) (version 2)
 
Do you have an old PC lying around the house which absolutely no one wants? Then you can convert it into a dedicated controller. Communicate with the real world via the parallel printer port on your PC. Simply connect a DB25 straight trough cable from computer to DB25 connector on the relay board. There are 8 relays each capable of switching 12VDC/10A or 240VAC/5A. Each relay has an LED to indicate when it is operated. We provide two sets of complete, stand-alone software to control the relays: one works under DOS so you can write your own batch files to control individual relays, the other works under Windows. Needs 12VDC center positive 2.5mm power supply. PCB Size 6.75" x 2.75" (CPA74)
Quantity
Price
1 – 9$39.99
10 – 99$37.80
100 +$36.54

  (Assembled and Tested)  
  CPA74  
  14  
 
..........................
Click here for detailed specs.
PC Printer Port Relay Board (kit) (version 2)
 
Do you have an old PC lying around the house which absolutely no one wants? Then you can convert it into a dedicated controller. Communicate with the real world via the parallel printer port on your PC. Simply connect printer cable from computer to Centronics connector on relay board. There are 8 relays each capable of switching 12VDC/10A or 240VAC/5A. Each relay has an LED to indicate when it is operated. We provide two sets of complete, stand-alone software to control the relays: one works under DOS so you can write your own batch files to control individual relays, the other under Windows 3.1. Needs 12VDC center positive 2.5mm power supply. PCB Size 6.75" x 2.75" (version 2) (CPS74)
Quantity
Price
1 – 9$36.34
10 – 99$33.75
100 +$32.63

  (Kit - Basic Soldering Required)  
  CPS74  
  9  
 
..........................
Click here for detailed specs.
Parallel port output module (V2) (Assembled)
 
Once stock on hand is sold out for this item, it will no longer be available as pre-assembled. It will still be available as a kit requiring soldering.

This is our Kit 74V2 but put into a box with top quality Dinkle connectors to the relays. With the rapid progress in computer technology many people now have a surplus computer just gathering dust somewhere. Thus these computers are free to be used as dedicated controllers for a variety of uses: turning on/off lights or other devices around the home, office, laboratory or factory come to mind. All that is needed is the interface to connect it to the real world. (CPA165)
Quantity
Price
1 – 9$65.41
10 – 99$60.75
100 +$58.73

  (Assembled and Tested)  
  CPA165  
  4  
 
This web store and web site powered by NetSuite ecommerce software