LEAD-FREE SOLDER Sn 99.3% - Cu 0.7% WITH DISPENSER 0.04" 0.03lb.

Shopping Cart

	Your Cart is Empty
	View Cart

Specifications
99.3% SN - 0.7% Cu
with resin core
melting point: 446°F
Packaging: Tube
(SOLDERDISPLF)

Quantity	Price
1 – 9	$1.80
10 – 99	$1.70
100 +	$1.56

Skill Level of Item:		(Component or Part)
Product #		SOLDERDISPLF
Quantity Available:		16

Tell a Friend

You might also consider these items:

2pin connector cable (8 inch)

BB089

Quantity	Price
1 – 9	$0.33
10 – 99	$0.29
100 +	$0.24

Skill Level of Item:		(Component or Part)
Product #		BB089
Quantity Available:		52

20 second voice recorder/playback module (A93010/A96010)

PLEASE NOTE: A96010 or A93010 is supplied depending on availability. Currently only A93010 is available and is the one that is been sold. A96010 is not currently available. The small size is because the IC is in Chip-on-board form. One button is pushed down to record the message. The electret microphone is on the board. The LED turns on during this time. The other button just has to be momentarily pressed to replay the message. A second momentary press during playback will stop the playback. Sampling rate is 4K. All you have to add is the speaker (not included) and 5V DC power (not included). The record play time is determined by the 52K resistor. If you change it to 89K you will get 30 seconds but at a reduced sampling rate. Operating current 25mA. Standby current 10 uA. Size: 34 x 23 x 11 mm. The module comes supplied as you see it in the photo.

OPTIONAL ITEMS (Not included):
2 x (BB089) connector cable to connect the voice recorder to a speaker and power source.
1 x (PB244) Speaker
1 x Battery holder that can hold either 4 x AAA or 4 x AA or 4 x C or 4 x D cells. See our battery holders.

(A96010 & A93010)

Quantity	Price
1 – 9	$6.60
10 – 99	$5.95
100 – 999	$4.95
1000 +	$3.95

Skill Level of Item:		(Assembled and Tested)
Product #		A96010
Quantity Available:		174

Panel push to make NO Switch, round knob, 0.5 A

HB209

Quantity	Price
1 – 9	$1.22
10 – 99	$1.02
100 +	$0.92

Skill Level of Item:		(Component or Part)
Product #		HB209
Quantity Available:		16

Battery clip for 9V PP3 Battery

Specifications
I-type
low-cost
(SNAP9V)

Quantity	Price
1 – 9	$0.21
10 – 99	$0.18
100 +	$0.16

Skill Level of Item:		(Component or Part)
Product #		SNAP9V
Quantity Available:		77

Speaker Round 3 inch 8 ohm 1 watt

PB244

Quantity	Price
1 – 9	$1.40
10 – 99	$1.29
100 +	$1.09

Skill Level of Item:		(Component or Part)
Product #		PB244
Quantity Available:		89

40 pin Univ ZIF Socket wide slot

Solder directly to PCB or plug directly into IC socket.
Screw mounting holes for more reliable operation.
(BB007)

Quantity	Price
1 – 9	$12.95
10 – 99	$11.95
100 +	$10.95

Skill Level of Item:		(Component or Part)
Product #		BB007
Quantity Available:		15

Toy motor kit

Construct a working DC Motor. This clever kit has been delighting children for decades. All parts provided, including: 2 coils of copper wire; base; field pole; armature core; brushes; all fasteners. Instruction booklet with theory and experiments included.
Operates on 3 to 6 volt batteries (not included). (CPN135S)

Quantity	Price
1 – 9	$5.45
10 – 99	$5.25
100 +	$4.95

Skill Level of Item:		(Kit - No Soldering Required)
Product #		CPN135S
Quantity Available:		51

KC7783 PIR Detector Module (Assem and tested)

This is a fully assembled and tested miniature PIR module (KC7783 with KC778B IC) with only 3 connections: Power, Ground & Output. Rated for 4 - 12VDC input power. Uses RE200B PIR sensor. Output is an active high pulse of approx. 0.5 seconds and remains active as long as there is motion. Range up to 10 feet. PCB size: 35mm x 25mm(CPS76)

Quantity	Price
1 – 9	$9.45
10 – 99	$7.95
100 – 999	$6.95
1000 +	$5.45

Skill Level of Item:		(Component or Part)
Product #		CPS76
Quantity Available:		13

(Not Pictured)

Cable hook-up wire 2m red

DB013

Quantity	Price
1 – 9	$0.24
10 – 99	$0.20
100 +	$0.18

Skill Level of Item:		(Component or Part)
Product #		DB013
Quantity Available:		2