1 CHANNEL DMX CONTROLLED POWER DIMMER

Shopping Cart

	Your Cart is Empty
	View Cart

Features suitable for resistive loads like incandescent lamps and mains voltage halogen lighting system addressability: 512 unique addresses, selectable with DIP switch status LED for power and error detection toroidal filtering for low noise (according to EN55015) stand alone "test" mode control source: DMX-512, 3 pin XLR socket included Specifications load capacity: max. 1000 W @ 230V (5A) or 500W @ 115V power Input: 115/230 VAC size: 150 x 60 x 45mm / 5,9 x 2,36 x 1,77"

English Assembly Manual

Assembly Manual

This kit allows you to control a lamp or group of lamps through a DMX signal. The DMX protocol was developed by USITT in 1986 with the purpose of controlling dimmers, scanners, moving heads and other lighting devices with simple wiring. It is mainly being used in theatres and discos, but you can use it in any place where a central or automated lighting is needed.
Use our "USB controlled DMX interface" K8062 (kit version), VM116 (built version) or any other control console compliant with the DMX-512 protocol as a controller.
(K8039)

Quantity	Price
1 – 9	$46.51
10 – 99	$43.20
100 +	$41.76

Skill Level of Item:		(Kit - Complex Soldering Required)
Product #		K8039
Quantity Available:		3

Tell a Friend

Related Items Are:

USB CONTROLLED DMX INTERFACE (kit)

Features

this unit can control DMX fixtures using a PC and USB interface
test software and "DMX Light Player" software is included, a DLL is provided to write your own software
furthermore there is a stand-alone test function that outputs all 512 channels at a time, with adjustable levels
kit includes:
nice enclosure
USB cable
CD with: test software, DLL for own developments, free DMX light player

Specifications

connected and powered through USB
512 DMX channels with 256 levels each
3 pin XLR-DMX output connector
Windows 98SE or higher compatible
DLL included to write your own software
optional 9V battery needed for stand alone test mode
solid state - fuse protection on DMX output
dimensions: 4.2" x 4.0" x 1.75"
(K8062)

Quantity	Price
1 – 9	$57.12
10 – 99	$53.06
100 +	$51.29

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		K8062
Quantity Available:		5

USB CONTROLLED DMX INTERFACE (assembled)

Quantity	Price
1 – 9	$67.15
10 – 99	$62.37
100 +	$60.29

Skill Level of Item:		(Assembled and Tested)
Product #		VM116
Quantity Available:		22

DMX-CONTROLLED RELAY SWITCH

This Kit allows you to control a relay by means of the well-known DMX512 protocol. This protocol was developed by USITT in 1986 to control dimmers, scanners, moving-head spots and other lighting devices with a simple wiring.
In some cases, a simple ON/OFF selection is desired. This is where this K8072 comes in. It is actually a bus-controlled power driver. The relay will be activated when the DMX value of the set channel equals 140 or more and turns off when the value is 120 or less.

Together with our K8062/VM116, a computer-controlled automation will be very easy to build.
(K8072)

Quantity	Price
1 – 9	$37.50
10 – 99	$34.83
100 +	$33.67

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		K8072
Quantity Available:		4