5mm White water clear LED 3.5V 11,000 mcd

Shopping Cart

	Your Cart is Empty
	View Cart

Max. current: 20mA.
Max. reverse voltage: 5V.
Indicated typical forward voltage for 15mA LED current.
Luminous intensity Iv (mcd) is typical.
The cathode (negative shorter lead) is denoted by the flat side on the package.
(AB287)

Quantity	Price
1 – 9	$0.91
10 – 99	$0.76
100 – 999	$0.69
1000 +	$0.59

Skill Level of Item:		(Component or Part)
Product #		AB287
Quantity Available:		719

Tell a Friend

Related Items are:

WHITE LED 5mm WATER-CLEAR - 20,000 mcd 20°

Specifications

case: 5mm
emitting colour + material: super white GaN/SiC
wave length: 465nm
case colour: water clear
luminous intensity: 20000mCd (If=20mA)
forward voltage: 3.2V
viewing angle: 20°
(L-5WCN/5)

Quantity	Price
1 – 9	$1.71
10 – 99	$1.44
100 +	$1.30

Skill Level of Item:		(Component or Part)
Product #		L-5WCN/5
Quantity Available:		52

You might also consider these items:

20 second voice recorder/playback module (A93010/A96010)

PLEASE NOTE: This module, part# A96010, could actually be either an A96010 or an A93010 depending on what is in stock at the time. Both are virtually identical and operate the same, but downloadable datasheets are available for each for comparison if necessary. The small size is because the IC is in Chip-on-board form. One button is pushed down to record the message through the on-board electret microphone; A LED turns on during this time. The other button just has to be momentarily pressed to replay the message. A second momentary press during playback will stop the playback. Sampling rate is 4K. All you have to add is the speaker (not included) and 5V DC power (not included). We also have an A96010-kit which in addition to the A96010 also includes a speaker and two cable connectors to connect the unit to a power supply (not included) and the speaker. The record/play time is determined by the 52K resistor. If you change it to 89K you will get 30 seconds but at a reduced sampling rate. Operating current 25mA. Standby current 10 uA. Size: 34 x 23 x 11 mm. The module comes supplied as you see it in the photo.

OPTIONAL ITEMS (Not included):
2 x (BB089) connector cable to connect the voice recorder to a speaker and power source.
1 x (PB244) Speaker
1 x Battery holder that can hold either 4 x AAA or 4 x AA or 4 x C or 4 x D cells. See our battery holders.

(A96010 & A93010)

Quantity	Price
1 – 9	$6.60
10 – 99	$5.95
100 – 999	$4.95
1000 +	$3.95

Skill Level of Item:		(Assembled and Tested)
Product #		A96010
Quantity Available:		160

..........................

WHITE LED 5mm WATER-CLEAR - 20,000 mcd 20°

Quantity	Price
1 – 9	$1.71
10 – 99	$1.44
100 +	$1.30

..........................

Click here for specs, downloads, and more pictures.

KC7783 PIR Detector Module (Assem and tested)

This is a fully assembled and tested miniature PIR module (KC7783 with KC778B IC) with only 3 connections: Power, Ground & Output. Rated for 4 - 12VDC input power. Uses RE200B PIR sensor. Output is an active high pulse of approx. 0.5 seconds and remains active as long as there is motion. Range up to 10 feet. PCB size: 35mm x 25mm(CPS76)

Quantity	Price
1 – 9	$9.45
10 – 99	$7.95
100 – 999	$6.95
1000 +	$5.45

Skill Level of Item:		(Component or Part)
Product #		CPS76
Quantity Available:		593

..........................

ELECTRONIC CANDLE

Features

cannot be blown out by the wind
safe for kids and pets
great at home, for parties, Xmas, Halloween, etc.
choose between 3 different modes:
realistically flickering flame
steady flame
fade in - fade out
fits standard 38mm cup
safe: no flame or heat
5h turn-off timer saves batteries
yellow high-intensity LED
(MK167)

Quantity	Price
1 – 9	$8.89
10 – 99	$8.42
100 +	$7.72

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		MK167
Quantity Available:		7

..........................

3 1/2 DMM - 10A / HOLD FUNCTION / BACKLIGHT

Features:

DMM with automatic polarity function and 3 ½ digit LCD display
measurements: DC current up to 10A, AC and DC voltage up to 600V, resistance up to 2Mohm
diode, transistor and continuity test with buzzer
data-hold function and backlight
with protection holster
(DVM850BL)

Quantity	Price
1 – 9	$12.83
10 – 99	$12.15
100 +	$11.14

Skill Level of Item:		(Assembled and Tested)
Product #		DVM850BL
Quantity Available:		14

..........................

SUPER STEREO EAR KIT

Stereo audio amplifier boosts sound 50 times. Great for the-hearing impaired (e.g. when watching TV), as a gadget, science project, … With volume control and on/off switch.

Specifications
power supply: 3 1.5V AA battery (not included)
dimensions: 2.4" x 2.1" x 1.7"
(MK136)

Quantity	Price
1 – 9	$7.87
10 – 99	$7.45
100 – 999	$6.83
1000 +	$6.45

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		MK136
Quantity Available:		150

..........................

Toy motor kit

Construct a working DC Motor. This clever kit has been delighting children for decades. All parts provided, including: 2 coils of copper wire; base; field pole; armature core; brushes; all fasteners. Instruction booklet with theory and experiments included.
Operates on 3 to 6 volt batteries (not included). (CPN135S)

Quantity	Price
1 – 9	$8.47
10 – 99	$8.03
100 +	$7.36

Skill Level of Item:		(Kit - No Soldering Required)
Product #		CPN135S
Quantity Available:		77

..........................

2 Screw Terminal Blocks Pitch = 5mm

Features
blocks are stackable
Specifications
number of contacts: 2
body: glass-filled polyester (ULM94VO)
contact: tin-plated brass (CuZn)
wire protection: stainless steel
pitch: 5mm
mounting hole: Ø1.5mm
current rating: max. 16A / way
operating temperature: -33°C to +120°C
soldering temperature: +260°C (max. 10 seconds)
color: blue
(JB044)

Quantity	Price
1 – 9	$0.21
10 – 99	$0.18
100 – 999	$0.16
1000 +	$0.12

Skill Level of Item:		(Component or Part)
Product #		JB044
Quantity Available:		70