ELECTRONIC STROBE LIGHT 12VDC

Shopping Cart

	Your Cart is Empty
	View Cart

ELECTRONIC STROBE LIGHT 12VDC - RED

Specifications

colour: red
flash rate: ±50/min
power consumption: <1W
supply voltage: 12VDC
dimensions: 90 x 44mm (115 x 55mm)
weight: 95g

Features

weather-resistant
xenon flash tube
easy installation
(HAA110R)

Quantity	Price
1 – 9	$7.18
10 – 99	$6.80
100 +	$6.24

Skill Level of Item:		(Assembled and Tested)
Product #		HAA110R
Quantity Available:		10

Tell a Friend

Related Items Are:

strobe light 12V DC red lens ( Xenon)

Features
for alarm systems, discos, personal use, warning in case of danger, etc...
Specifications
lens color: red
long-life xenon tube
protected against polarity reversal
fully sealed and waterproof
power output: 1W
power supply: DC 12V
current consumption: 150mA
flash rate: 90-110/min.
life expectancy: ± 3 x 1000000 flashes
operation temperature: -40°F to +176°F
black ABS / acrylic cover
dimensions: 2.8"(Ø) x 2.5"
(HAA40R)

Quantity	Price
1 – 9	$8.38
10 – 99	$7.94
100 +	$7.28

Skill Level of Item:		(Assembled and Tested)
Product #		HAA40R
Quantity Available:		23

You might also consider these items:

20 second voice recorder/playback module (A93010/A96010)

PLEASE NOTE: A96010 or A93010 is supplied depending on availability. Currently only A93010 is available and is the one that is been sold. A96010 is not currently available. The small size is because the IC is in Chip-on-board form. One button is pushed down to record the message. The electret microphone is on the board. The LED turns on during this time. The other button just has to be momentarily pressed to replay the message. A second momentary press during playback will stop the playback. Sampling rate is 4K. All you have to add is the speaker (not included) and 5V DC power (not included). The record play time is determined by the 52K resistor. If you change it to 89K you will get 30 seconds but at a reduced sampling rate. Operating current 25mA. Standby current 10 uA. Size: 34 x 23 x 11 mm. The module comes supplied as you see it in the photo.

OPTIONAL ITEMS (Not included):
2 x (BB089) connector cable to connect the voice recorder to a speaker and power source.
1 x (PB244) Speaker
1 x Battery holder that can hold either 4 x AAA or 4 x AA or 4 x C or 4 x D cells. See our battery holders.

(A96010 & A93010)

Quantity	Price
1 – 9	$6.60
10 – 99	$5.95
100 – 999	$4.95
1000 +	$3.95

Skill Level of Item:		(Assembled and Tested)
Product #		A96010
Quantity Available:		183

DC Motor Speed Controller

This kit will control the speed of any common DC motor rated up to 100V (7A). Operates on 5V to 15V. Uses a NE556 to pulse-width modulate a high current switching power transistor, IRF530 MOSFET. In this way motor torque is maintained. Adjustable speed control. (CPS67)

Quantity	Price
1 – 9	$20.52
10 – 99	$19.44
100 +	$17.82

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS67
Quantity Available:		22

KC7783 PIR Detector Module (Assem and tested)

This is a fully assembled and tested miniature PIR module (KC7783 with KC778B IC) with only 3 connections: Power, Ground & Output. Rated for 4 - 12VDC input power. Uses RE200B PIR sensor. Output is an active high pulse of approx. 0.5 seconds and remains active as long as there is motion. Range up to 10 feet. PCB size: 35mm x 25mm(CPS76)

Quantity	Price
1 – 9	$9.45
10 – 99	$7.95
100 – 999	$6.95
1000 +	$5.45

Skill Level of Item:		(Component or Part)
Product #		CPS76
Quantity Available:		378

Battery clip for 9V PP3 Battery

Specifications
I-type
low-cost
(SNAP9V)

Quantity	Price
1 – 9	$0.21
10 – 99	$0.18
100 +	$0.16

Skill Level of Item:		(Component or Part)
Product #		SNAP9V
Quantity Available:		78

2 Screw Terminal Blocks Pitch = 5mm

Features
blocks are stackable
Specifications
number of contacts: 2
body: glass-filled polyester (ULM94VO)
contact: tin-plated brass (CuZn)
wire protection: stainless steel
pitch: 5mm
mounting hole: Ø1.5mm
current rating: max. 16A / way
operating temperature: -33°C to +120°C
soldering temperature: +260°C (max. 10 seconds)
color: blue
(JB044)

Quantity	Price
1 – 9	$0.21
10 – 99	$0.18
100 – 999	$0.16
1000 +	$0.12

Skill Level of Item:		(Component or Part)
Product #		JB044
Quantity Available:		52

TRICKLE CHARGER WITH SOLAR CELLS (12V/1.

Powerful solar power source for 12Vdc battery.

Features

built-in protection to prevent current reversal
included accessories:
1 x lead wire with cigarette lighter plug
1 x lead (3m) with 2 battery clamps
4 x suction cups (for mounting e.g. on car window)
optional controller: SOL4UCN2

Specifications

power: 1.5W maximum
voltage output: 12V (± 20%)
nominal voltage: 14.5V
current: 125mA
dimensions: 13.4" x 4.7" x 0.6"
weight: 1.0 lbs
(SOL5N)

Quantity	Price
1 – 9	$27.76
10 – 99	$25.79
100 +	$24.93

Skill Level of Item:		(Assembled and Tested)
Product #		SOL5N
Quantity Available:		5

10 COLOR - STRANDED MOUNTING WIRE KIT 60m

Specifications

multicore, sqt 0.008"
colors: 16.4ft : white / blue / brown / green / yellow / orange / gray / violet + 32.8ft : black / red
AWG24
internal Ø: 7 x 0.007" (sqt 0.008")
external Ø: 0.055"
max. voltage: 60V
max. current: 4.3A
PVC insulation
tinned CU
(K/MOW)

Quantity	Price
1 – 9	$8.21
10 – 99	$7.78
100 +	$7.13

Skill Level of Item:		(Component or Part)
Product #		K/MOW
Quantity Available:		11

BOLT SET 330 PCS (PHILIPS SCREWS, NUTS & WASHERS)

Specifications

material: zinc-plated steel
screws:
M2x12mm: 20pcs
M2x19mm: 20pcs
M3x12mm: 20pcs
M3x19mm: 20pcs
M4x12mm: 20pcs
M4x25mm: 10pcs
full nuts:
M2: 40pcs
M3: 40pcs
M4: 30pcs
washers:
M2: 40pcs
M3: 40pcs
M4: 30pcs
(K/SC1)

Quantity	Price
1 – 9	$2.05
10 – 99	$1.94
100 +	$1.78

Skill Level of Item:		(Component or Part)
Product #		K/SC1
Quantity Available:		7