MAGIC PLASMA LIGHT 8"

Shopping Cart

	Your Cart is Empty
	View Cart

2 functions : continuously on or music-controlled operation (the lightening flashes to the rhythm of the music).
Specifications

power supply: 12V AC/DC adapter (incl.)
power consumption: 12W
dimensions: 7.09" x 7.09" x 11.82"
weight: 1.98lbs
(VDL8PLU)

Quantity	Price
1 – 9	$18.02
10 – 99	$16.74
100 +	$16.18

Skill Level of Item:		(Assembled and Tested)
Product #		VDL8PLU
Quantity Available:		3

Tell a Friend

You might also consider these items:

BOLT SET 330 PCS (PHILIPS SCREWS, NUTS & WASHERS)

Specifications

material: zinc-plated steel
screws:
M2x12mm: 20pcs
M2x19mm: 20pcs
M3x12mm: 20pcs
M3x19mm: 20pcs
M4x12mm: 20pcs
M4x25mm: 10pcs
full nuts:
M2: 40pcs
M3: 40pcs
M4: 30pcs
washers:
M2: 40pcs
M3: 40pcs
M4: 30pcs
(K/SC1)

Quantity	Price
1 – 9	$1.88
10 – 99	$1.78
100 +	$1.63

Skill Level of Item:		(Component or Part)
Product #		K/SC1
Quantity Available:		6

20 second voice recorder/playback module (A93010/A96010)

PLEASE NOTE: A96010 or A93010 is supplied depending on availability. Currently only A93010 is available and is the one that is been sold. A96010 is not currently available. The small size is because the IC is in Chip-on-board form. One button is pushed down to record the message. The electret microphone is on the board. The LED turns on during this time. The other button just has to be momentarily pressed to replay the message. A second momentary press during playback will stop the playback. Sampling rate is 4K. All you have to add is the speaker (not included) and 5V DC power (not included). The record play time is determined by the 52K resistor. If you change it to 89K you will get 30 seconds but at a reduced sampling rate. Operating current 25mA. Standby current 10 uA. Size: 34 x 23 x 11 mm. The module comes supplied as you see it in the photo.

OPTIONAL ITEMS (Not included):
2 x (BB089) connector cable to connect the voice recorder to a speaker and power source.
1 x (PB244) Speaker
1 x Battery holder that can hold either 4 x AAA or 4 x AA or 4 x C or 4 x D cells. See our battery holders.

(A96010 & A93010)

Quantity	Price
1 – 9	$6.60
10 – 99	$5.95
100 – 999	$4.95
1000 +	$3.95

Skill Level of Item:		(Assembled and Tested)
Product #		A96010
Quantity Available:		194

Battery clip for 9V PP3 Battery

Specifications
I-type
low-cost
(SNAP9V)

Quantity	Price
1 – 9	$0.21
10 – 99	$0.18
100 +	$0.16

Skill Level of Item:		(Component or Part)
Product #		SNAP9V
Quantity Available:		77

strobe light 12V DC red lens ( Xenon)

Features
for alarm systems, discos, personal use, warning in case of danger, etc...
Specifications
lens color: red
long-life xenon tube
protected against polarity reversal
fully sealed and waterproof
power output: 1W
power supply: DC 12V
current consumption: 150mA
flash rate: 90-110/min.
life expectancy: ± 3 x 1000000 flashes
operation temperature: -40°F to +176°F
black ABS / acrylic cover
dimensions: 2.8"(Ø) x 2.5"
(HAA40R)

Quantity	Price
1 – 9	$8.38
10 – 99	$7.94
100 +	$7.28

Skill Level of Item:		(Assembled and Tested)
Product #		HAA40R
Quantity Available:		10

10 COLOR - STRANDED MOUNTING WIRE KIT 60m

Specifications

multicore, sqt 0.008"
colors: 16.4ft : white / blue / brown / green / yellow / orange / gray / violet + 32.8ft : black / red
AWG24
internal Ø: 7 x 0.007" (sqt 0.008")
external Ø: 0.055"
max. voltage: 60V
max. current: 4.3A
PVC insulation
tinned CU
(K/MOW)

Quantity	Price
1 – 9	$8.21
10 – 99	$7.78
100 +	$7.13

Skill Level of Item:		(Component or Part)
Product #		K/MOW
Quantity Available:		12

IR LIGHT BARRIER

Applications : announce visitors, warn against burglars, set boundaries, for science projects,...

Specifications

audible (85dB) and visible (LED) alert
range: 3.3ft to 13ft
on/off switch provided
power supply:
transmitter: 9V DC / 50mA max.
receiver: 9V DC / 20mA max.
9V battery holder and adapter jack included
dimensions:
transmitter: 2.2" x 1.6"
receiver: 3.9" x 2.0"
not recommended for outdoor use
(MK120)

Quantity	Price
1 – 9	$6.84
10 – 99	$6.48
100 +	$5.94

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		MK120
Quantity Available:		4

SPARE BIT FOR VTS20U - 0.04"

Specifications

tip: 0.04"
(BITU20)

Quantity	Price
1 – 9	$0.43
10 – 99	$0.36
100 +	$0.32

Skill Level of Item:		(Component or Part)
Product #		BITU20
Quantity Available:		9

EUROCARD FULL LINE - 3.9" x 6.3" - FR4

Specifications

track: full line
material: single-sided board, epoxy FR-4, 0.06", 1/0 oz. tinned copper, HASL
bore Ø: 0.041"
dimensions: 3.9"x6.3"
compatible with eurodin connectors DIN41617 and DIN41612
packaging: 1pc in blister
(ECL)

Quantity	Price
1 – 9	$5.99
10 – 99	$5.67
100 +	$5.20

Skill Level of Item:		(Component or Part)
Product #		ECL
Quantity Available:		13

EUROCARD FULL LINE - 3.9" x 3.1" - FR4

Specifications

track: full line
material: single-sided board, epoxy FR-4, 0.06", 1/0 oz. tinned copper, HASL
bore Ø: 0.041"
dimensions: 3.9"x3.1"
compatible with eurodin connectors DIN41617 and DIN41612
packaging: 1pc in blister
(ECL1/2)

Quantity	Price
1 – 9	$2.91
10 – 99	$2.75
100 +	$2.52

Skill Level of Item:		(Component or Part)
Product #		ECL1/2
Quantity Available:		9