SOUND-TO-LIGHT UNIT

Shopping Cart

	Your Cart is Empty
	View Cart

SOUND-TO-LIGHT UNIT

(Click here for the Manual)

Four high-intensity LEDs light up and react simultaneously on every sound. For different funny and practical applications, such as : sound indicator, simple sound-to-light unit for music, for the hearing impaired : can be used to indicate the telephone, door bell. Adjustable sensitivity with potentiometer. Built-in microphone.

Specifications:
consumption: 0.5mA min. / 12mA max.
power supply: 9V battery (not incl.) dimensions: 1.6" x 2.2" x 1.4"

Quantity	Price
1 – 9	$4.99
10 – 99	$4.78
100 +	$4.38

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		MK103
Quantity Available:		10

Tell a Friend

Related items are:

Audio to light modulator kit

A music-to-light modulator is a circuit which controls the intensity of one or more lights in response to an audio input. The kit is ideal to give the rhythm to any party or disco without much money. Very safe operation as it uses an opto-coupler as a coupling device between the audio and the mains controlling stages of the circuit.
Input trigger voltage: 2.3 - 2.5V (min)
Operating voltage: 110 or 250 VAC
Power handling: 220W @ 110V or 500W @ 250V
PCB size: 2.16" x 1.63" (To help in the decision to select an enclosure keep in mind that the heat sink used in the kit is about 1" tall.)
PLEASE NOTE, THIS KIT USES 120V MAINS ELECTRICITY AND SHOULD NOT BE ATTEMPTED BY ANYONE WITHOUT THE PROPER SKILL LEVEL. THIS SHOULD ALSO BE BUILT IN A SUITABLE PLASTIC ENCLOSURE.
(CPS12)

Quantity	Price
1 – 9	$17.10
10 – 99	$16.20
100 +	$14.85

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS12
Quantity Available:		29

..........................

SIMPLE ONE CHANNEL LIGHT ORGAN

With loudspeaker input. Modulates a lamp according to the music signal at the input. Optical isolated loudspeaker input. Adjustable sensitivity.

Specifications
input sensitivity: 2W to 60W
maximum load: 120W at 120V AC and 230W at 230V AC
dimensions: 2.4" x 1.6"
(MK110)

Quantity	Price
1 – 9	$8.38
10 – 99	$7.94
100 +	$7.28

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		MK110
Quantity Available:		2

..........................

3-CHANNEL SOUND LIGHT WITH MICROPHONE

Low, mid and high channels. Sensitivity adjustment per channel. LED indication per channel. Attractive transparent enclosure. Microphone included. Noise suppressed according to EN55015.

Specifications
operating voltages: 110-125 or 220-240V AC (50/60Hz)
max. load: 200W per channel (100W @ 110-125V AC)
only suited for incandescent light bulbs
dimensions: 6.1" x 1.8" x 6.3"
(K8017)

Quantity	Price
1 – 9	$55.89
10 – 99	$51.91
100 +	$50.18

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		K8017
Quantity Available:		6

You might also consider these items:

VOICE CHANGER

Features make your voice sound like a robot add vibrato effect use the 'pitch'-buttons and make your voice sound lower or higher built-in microphone and power amplifier with volume control, just add a speaker hours of fun! for parties, plays, recordings, games, prank phone calls etc.

Specifications :
speaker / line output
on/off switch
max. output power: 1.5 W (4 ohm)
power supply: 9Vdc / 300mA
dimensions: 77 x 46 mm

(MK171)

Quantity	Price
1 – 9	$15.22
10 – 99	$14.42
100 +	$13.22

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		MK171
Quantity Available:		9

..........................

20 second voice recorder/playback module (A93010/A96010)

PLEASE NOTE: This module, part# A96010, could actually be either an A96010 or an A93010 depending on what is in stock at the time. Both are virtually identical and operate the same, but downloadable datasheets are available for each for comparison if necessary. The small size is because the IC is in Chip-on-board form. One button is pushed down to record the message through the on-board electret microphone; A LED turns on during this time. The other button just has to be momentarily pressed to replay the message. A second momentary press during playback will stop the playback. Sampling rate is 4K. All you have to add is the speaker (not included) and 5V DC power (not included). We also have an A96010-kit which in addition to the A96010 also includes a speaker and two cable connectors to connect the unit to a power supply (not included) and the speaker. The record/play time is determined by the 52K resistor. If you change it to 89K you will get 30 seconds but at a reduced sampling rate. Operating current 25mA. Standby current 10 uA. Size: 34 x 23 x 11 mm. The module comes supplied as you see it in the photo.

OPTIONAL ITEMS (Not included):
2 x (BB089) connector cable to connect the voice recorder to a speaker and power source.
1 x (PB244) Speaker
1 x Battery holder that can hold either 4 x AAA or 4 x AA or 4 x C or 4 x D cells. See our battery holders.

(A96010 & A93010)

Quantity	Price
1 – 9	$6.60
10 – 99	$5.95
100 – 999	$4.95
1000 +	$3.95

Skill Level of Item:		(Assembled and Tested)
Product #		A96010
Quantity Available:		164