ELECTRONIC CANDLE

Shopping Cart

	Your Cart is Empty
	View Cart

	Welcome
		50 second USB recording module
		C-Cam2AX cmos Camera Module, B/W, EIA
		KC7783 PIR Detector Module (Assem and tested)
		C-Cam8A-6016IR miniature cmos camera, color NTSC
		INTERVAL TIMER (Assembled)
		USB CONTROLLED DMX INTERFACE (assembled)
		LOW-COST SOLDERING STATION 50W 374-896°F
		10 Sec Recording Module in white case with 3 section slide switch
		C328-2225BW JPEG Compression VGA Camera Module
		Recording Module 20 second - card type
		ELECTRONIC CANDLE
		Serial Isolated I/O Module (Assembled & Tested)
		MINI 3 1/2 DIGIT DMM - 19 RANGES
		Gift Certificate
		20 Second recording module with 9V battery Connector
		20 second voice recorder/playback module (A93010/A96010)
		5mm White water clear LED 3.5V 11,000 mcd
		PERSONAL SCOPE 10MS/s
		DVR623 - DSC / DV module for Hobbyist
		HANDHELD PERSONAL SCOPE WITH USB
		SUPER STEREO EAR KIT

ELECTRONIC CANDLE

Specifications

power supply: 1x CR2032 3V battery (not incl.)
autonomy: +/- 15 days (5h/day, flickering candle mode)
power-off timer: +/- 5h
current consumption: 4mA max
dimensions: 38x25mm

(Manual)

Features

cannot be blown out by the wind
safe for kids and pets
great at home, for parties, Xmas, Halloween, etc.
choose between 3 different modes:
realistically flickering flame
steady flame
fade in - fade out
fits standard 38mm cup
safe: no flame or heat
5h turn-off timer saves batteries
yellow high-intensity LED
(MK167)

Quantity	Price
1 – 9	$8.89
10 – 99	$8.42
100 +	$7.72

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		MK167
Quantity Available:		11

Tell a Friend

Related items are:

CANDLE LED LIGHT

Features
creates the same atmosphere as a real candle
comes with frosted glass holder
with on/off switch
Specifications
power supply: 2 x LR03C (not incl.)
dimensions: Ø60 x 135mm
weight: 335g
(XMCL1)

Quantity	Price
1 – 9	$3.59
10 – 99	$3.40
100 +	$3.12

Skill Level of Item:		(Assembled and Tested)
Product #		XMCL1
Quantity Available:		15

You might also consider these items:

20 second voice recorder/playback module (A93010/A96010)

PLEASE NOTE: A96010 or A93010 is supplied depending on availability. Currently only A93010 is available and is the one that is been sold. A96010 is not currently available. The small size is because the IC is in Chip-on-board form. One button is pushed down to record the message. The electret microphone is on the board. The LED turns on during this time. The other button just has to be momentarily pressed to replay the message. A second momentary press during playback will stop the playback. Sampling rate is 4K. All you have to add is the speaker (not included) and 5V DC power (not included). The record play time is determined by the 52K resistor. If you change it to 89K you will get 30 seconds but at a reduced sampling rate. Operating current 25mA. Standby current 10 uA. Size: 34 x 23 x 11 mm. The module comes supplied as you see it in the photo.

OPTIONAL ITEMS (Not included):
2 x (BB089) connector cable to connect the voice recorder to a speaker and power source.
1 x (PB244) Speaker
1 x Battery holder that can hold either 4 x AAA or 4 x AA or 4 x C or 4 x D cells. See our battery holders.

(A96010 & A93010)

Quantity	Price
1 – 9	$6.60
10 – 99	$5.95
100 – 999	$4.95
1000 +	$3.95

Skill Level of Item:		(Assembled and Tested)
Product #		A96010
Quantity Available:		128

..........................

CANDLE LED LIGHT

Quantity	Price
1 – 9	$3.59
10 – 99	$3.40
100 +	$3.12

..........................

5mm White water clear LED 3.5V 11,000 mcd

Max. current: 20mA.
Max. reverse voltage: 5V.
Indicated typical forward voltage for 15mA LED current.
Luminous intensity Iv (mcd) is typical.
The cathode (negative shorter lead) is denoted by the flat side on the package.
(AB287)

Quantity	Price
1 – 9	$0.91
10 – 99	$0.76
100 – 999	$0.69
1000 +	$0.59

Skill Level of Item:		(Component or Part)
Product #		AB287
Quantity Available:		972

..........................

Audio to light modulator kit

A music-to-light modulator is a circuit which controls the intensity of one or more lights in response to an audio input. The kit is ideal to give the rhythm to any party or disco without much money. Very safe operation as it uses an opto-coupler as a coupling device between the audio and the mains controlling stages of the circuit.
Input trigger voltage: 2.3 - 2.5V (min)
Operating voltage: 110 or 250 VAC
Power handling: 220W @ 110V or 500W @ 250V
PCB size: 2.16" x 1.63" (To help in the decision to select an enclosure keep in mind that the heat sink used in the kit is about 1" tall.)
PLEASE NOTE, THIS KIT USES 120V MAINS ELECTRICITY AND SHOULD NOT BE ATTEMPTED BY ANYONE WITHOUT THE PROPER SKILL LEVEL. THIS SHOULD ALSO BE BUILT IN A SUITABLE PLASTIC ENCLOSURE.
(CPS12)

Quantity	Price
1 – 9	$14.82
10 – 99	$14.04
100 +	$12.87

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS12
Quantity Available:		40

..........................

KC7783 PIR Detector Module (Assem and tested)

This is a fully assembled and tested miniature PIR module (KC7783 with KC778B IC) with only 3 connections: Power, Ground & Output. Rated for 4 - 12VDC input power. Uses RE200B PIR sensor. Output is an active high pulse of approx. 0.5 seconds and remains active as long as there is motion. Range up to 10 feet. PCB size: 35mm x 25mm(CPS76)

Quantity	Price
1 – 9	$9.45
10 – 99	$7.95
100 – 999	$6.95
1000 +	$5.45

Skill Level of Item:		(Component or Part)
Product #		CPS76
Quantity Available:		972

..........................

Toy motor kit

Construct a working DC Motor. This clever kit has been delighting children for decades. All parts provided, including: 2 coils of copper wire; base; field pole; armature core; brushes; all fasteners. Instruction booklet with theory and experiments included.
Operates on 3 to 6 volt batteries (not included). (CPN135S)

Quantity	Price
1 – 9	$5.45
10 – 99	$5.25
100 +	$4.95

Skill Level of Item:		(Kit - No Soldering Required)
Product #		CPN135S
Quantity Available:		42

..........................

TRAFFIC LIGHT

Miniature traffic light as used on four-way junctions. Realistic operation with adjustable delay. 12 LEDs. Great for model railroads, exhibitions, as a toy, ...

Specifications

low power consumption: 15mA
power supply: 9V battery (not incl.)
ON/OFF switch
dimensions: 2.0" x 1.4" x 4.5"
(MK131)

Quantity	Price
1 – 9	$6.16
10 – 99	$5.83
100 +	$5.35

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		MK131
Quantity Available:		11