110VAC to 3-12VDC Adapter (300 mA)

Shopping Cart

	Your Cart is Empty
	View Cart

CLOSEOUT ITEM. LIMITED QTY AVAILABLE.
Universal adapter with 6-way universal plug-
includes Walkman™ plug
Replaces battery power with standard household current for use with radios, games, calculators & other battery-operated products
Converts 110V AC to 3, 4.5, 6, 7.5, 9 or 12V DC
UL listed
300 mAh

Price: $3.99

Skill Level of Item:		(Assembled and Tested)
Product #		BB151
Quantity Available:		6

Tell a Friend

You might also consider these items:

20 second voice recorder/playback module (A93010/A96010)

PLEASE NOTE: A96010 or A93010 is supplied depending on availability. Currently only A93010 is available and is the one that is been sold. A96010 is not currently available. The small size is because the IC is in Chip-on-board form. One button is pushed down to record the message. The electret microphone is on the board. The LED turns on during this time. The other button just has to be momentarily pressed to replay the message. A second momentary press during playback will stop the playback. Sampling rate is 4K. All you have to add is the speaker (not included) and 5V DC power (not included). The record play time is determined by the 52K resistor. If you change it to 89K you will get 30 seconds but at a reduced sampling rate. Operating current 25mA. Standby current 10 uA. Size: 34 x 23 x 11 mm. The module comes supplied as you see it in the photo.

OPTIONAL ITEMS (Not included):
2 x (BB089) connector cable to connect the voice recorder to a speaker and power source.
1 x (PB244) Speaker
1 x Battery holder that can hold either 4 x AAA or 4 x AA or 4 x C or 4 x D cells. See our battery holders.

(A96010 & A93010)

Quantity	Price
1 – 9	$6.60
10 – 99	$5.95
100 – 999	$4.95
1000 +	$3.95

Skill Level of Item:		(Assembled and Tested)
Product #		A96010
Quantity Available:		128

Voice Recording Module 2 x 20sec sections

The A96020 voice recording module offers true single chip solid state storage capability and requires no software or micro-controller support. It provides high quality recording and playback with dual 20 second message. Sampling rate is 3.2K. Size: 34 x 23 x 11 mm. All you need to do is add a speaker (not included) and 5V DC Power (not included). Features - Non volatile flash memory technology - No battery back up required - User friendly, easy to operate - Slide switch for record or play back - Separate key to trigger message 1 or 2 - Low power consumption - LED to indicate recording and playback - Built-in condenser mic - Automatic power down - 5-6V Operation.

OPTIONAL ITEMS (Not included):
2 x (BB089) connector cable to connect the voice recorder to a speaker and power source.
1 x (PB244) Speaker
1 x Battery holder that can hold either 4 x AAA or 4 x AA or 4 x C or 4 x D cells. See our battery holders.

(A96020)

Quantity	Price
1 – 9	$8.89
10 – 99	$8.42
100 – 999	$7.72
1000 +	$4.95

Skill Level of Item:		(Assembled and Tested)
Product #		A96020
Quantity Available:		73

Toy motor kit

Construct a working DC Motor. This clever kit has been delighting children for decades. All parts provided, including: 2 coils of copper wire; base; field pole; armature core; brushes; all fasteners. Instruction booklet with theory and experiments included.
Operates on 3 to 6 volt batteries (not included). (CPN135S)

Quantity	Price
1 – 9	$5.45
10 – 99	$5.25
100 +	$4.95

Skill Level of Item:		(Kit - No Soldering Required)
Product #		CPN135S
Quantity Available:		42

INTERVAL TIMER KIT (Out of Stock)

For intermittent operation of circuits and equipment. Blinking light, video/photo single frame shooting, slide projector control, miniature models.

Specifications
output relay with dry switch-over contact: 3A/24V
pulse time adjustable: between 0.5 and 5 sec.
pause time adjustable: between 2.5 and 60 sec.
power supply: 12V DC / 100mA
dimensions: 1.6" x 3.4"

Quantity	Price
1 – 9	$5.45
10 – 99	$4.55
100 +	$3.95

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		MK111
Quantity Available:		0

Audio to light modulator kit

A music-to-light modulator is a circuit which controls the intensity of one or more lights in response to an audio input. The kit is ideal to give the rhythm to any party or disco without much money. Very safe operation as it uses an opto-coupler as a coupling device between the audio and the mains controlling stages of the circuit.
Input trigger voltage: 2.3 - 2.5V (min)
Operating voltage: 110 or 250 VAC
Power handling: 220W @ 110V or 500W @ 250V
PCB size: 2.16" x 1.63" (To help in the decision to select an enclosure keep in mind that the heat sink used in the kit is about 1" tall.)
PLEASE NOTE, THIS KIT USES 120V MAINS ELECTRICITY AND SHOULD NOT BE ATTEMPTED BY ANYONE WITHOUT THE PROPER SKILL LEVEL. THIS SHOULD ALSO BE BUILT IN A SUITABLE PLASTIC ENCLOSURE.
(CPS12)

Quantity	Price
1 – 9	$14.82
10 – 99	$14.04
100 +	$12.87

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS12
Quantity Available:		40

Battery clip for 9V PP3 Battery

Specifications
I-type
low-cost
(SNAP9V)

Quantity	Price
1 – 9	$0.21
10 – 99	$0.18
100 +	$0.16

Skill Level of Item:		(Component or Part)
Product #		SNAP9V
Quantity Available:		72

2pin connector cable (8 inch)

BB089

Quantity	Price
1 – 9	$0.33
10 – 99	$0.29
100 +	$0.24

Skill Level of Item:		(Component or Part)
Product #		BB089
Quantity Available:		128

SUPER STEREO EAR KIT

Stereo audio amplifier boosts sound 50 times. Great for the-hearing impaired (e.g. when watching TV), as a gadget, science project, … With volume control and on/off switch.

Specifications
power supply: 3 1.5V AA battery (not included)
dimensions: 2.4" x 2.1" x 1.7"
(MK136)

Quantity	Price
1 – 9	$7.87
10 – 99	$7.45
100 – 999	$6.83
1000 +	$6.45

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		MK136
Quantity Available:		136