logo200.jpg
  Register   Log In 
Welcome My Account Shopping Cart Contact Us Specials New Products Kits and Modules Components Consumer & PC Tools and Meters Security Books
 Kits and Modules > Audio and Sound Effects >  Returning Customers
click here to log in.
Shopping Cart
Your Cart is Empty
View Cart
 
 

SMALL SIREN 5-15V DC / 250mA 120dB W/LEADS

sv-ps6.jpg
Specifications

ABS
wired siren
good dimensions/sound ratio
operating voltage: 5-15Vdc
current consumption (at 12Vdc with siren): 250mA
osc. frequency: 1.5-4kHz
sound pressure level (at 1m): 120dBA
dimensions: 2.1" x Ø2.2"
weight: 3.7oz
mounting holes: 1.18"
(SV/PS6)
 
Quantity
Price
1 – 9$8.72
10 – 99$8.26
100 +$7.57

  (Assembled and Tested)  
  SV/PS6  
  9  
 
 
Tell a Friend
 
tn_cps126.jpg
Mini-Vox and Relay kit
 
The idea behind a VOX (voice activated switch) is that instead of the user pressing a switch to activate a relay, the sound of the users voice itself activates the relay. This gives hands-free control over devices like tape recorders. Power supply needed: 12VDC center positive 2.5mm jack. Electret microphone to pick up the sound is included. PCB size: 44mm x 48mm (1.73inch x 1.89inch).
(CPS126)
Quantity
Price
1 – 9$12.54
10 – 99$11.88
100 +$10.89

  (Kit - Basic Soldering Required)  
  CPS126  
  12  
 
tn_cps148.jpg
4-digit Timing Module
 
Uses microcontroller and crystal for accurate low cost timing. a 4 digit LED multiplexed output display is used. 6 Types of firmware available. The standard included firmware chip (T0) with the module is a programmable down timer of 10,000 sec. Please note all other optional firmware chips (T1 to T5) are available seperately. PCB size: 2”x2.6” Timing accuracy: 0.04%. 9-12VDC Current: 50mA (CPS148)
Quantity
Price
1 – 9$23.26
10 – 99$21.60
100 +$20.88

  (Kit - Basic Soldering Required)  
  CPS148  
  13  
 
tn_jb038.jpg
Battery clip for 9V PP3 Battery
 
Specifications
I-type
low-cost
(SNAP9V)
Quantity
Price
1 – 9$0.21
10 – 99$0.18
100 +$0.16

  (Component or Part)  
  SNAP9V  
  78  
 
tn_haa40r.jpg
strobe light 12V DC red lens ( Xenon)
 
Features
for alarm systems, discos, personal use, warning in case of danger, etc...
Specifications
lens color: red
long-life xenon tube
protected against polarity reversal
fully sealed and waterproof
power output: 1W
power supply: DC 12V
current consumption: 150mA
flash rate: 90-110/min.
life expectancy: ± 3 x 1000000 flashes
operation temperature: -40°F to +176°F
black ABS / acrylic cover
dimensions: 2.8"(Ø) x 2.5"
(HAA40R)
Quantity
Price
1 – 9$8.38
10 – 99$7.94
100 +$7.28

  (Assembled and Tested)  
  HAA40R  
  23  
 
tn_jb044.jpg
2 Screw Terminal Blocks Pitch = 5mm
 
Features
blocks are stackable
Specifications
number of contacts: 2
body: glass-filled polyester (ULM94VO)
contact: tin-plated brass (CuZn)
wire protection: stainless steel
pitch: 5mm
mounting hole: Ø1.5mm
current rating: max. 16A / way
operating temperature: -33°C to +120°C
soldering temperature: +260°C (max. 10 seconds)
color: blue
(JB044)
Quantity
Price
1 – 9$0.21
10 – 99$0.18
100 – 999$0.16
1000 +$0.12

  (Component or Part)  
  JB044  
  52  
 
tn_cps166a.jpg
Bidirectional DC Motor Speed Controller
 
This kit allows controlling the speed of a DC motor in both the forward and reverse direction. The range of control is from fully OFF to fully ON in both directions. Normally, switches are used to change the direction of rotation of a DC motor. Change the polarity of the applied voltage and the motor spins the other way! However this has the disadvantage that a DPDT switch has to be added to change the polarity of the applied voltage. Now you have two things to control the motor – a direction switch as well as the speed control. Also, it is not a good idea to suddenly reverse the voltage on a DC motor while it is spinning. It can cause a current surge that can burn out the speed controller. Not to mention any mechanical stress it can cause as well. PCB size: 93mm x 42mm (3.625 x 1.625 inch) (CPS166)
Quantity
Price
1 – 9$24.71
10 – 99$22.95
100 +$22.19

  (Kit - Basic Soldering Required)  
  CPS166  
  23  
 
tn_dvm810.jpg
MINI 3 1/2 DIGIT DMM - 19 RANGES
 
Features

automatic polarity indication
voltage measurements: AC 500V and DC 500V max.
current measurements: DC 10A max.
resistance measurements: 2Mohm
diode and transistor (hFE) test
packaging: blister
(DVM810)
Quantity
Price
1 – 9$5.47
10 – 99$5.18
100 +$4.75

  (Assembled and Tested)  
  DVM810  
  7  
 
tn_mk101.jpg
FLASHING LED SWEETHEART
 
Show your love in an original way that your heart still beats faster for him or her. 28 LEDs form 2 blinking hearts.
Specifications
consumption: ± 8mA
power supply: 9V battery (not incl.)
dimensions: 2.4" x 2.4" x 1.2" (MK101)
Quantity
Price
1 – 9$5.81
10 – 99$5.51
100 +$5.05

  (Kit - Basic Soldering Required)  
  MK101  
  12  
 
tn_a96020.jpg
Voice Recording Module 2 x 20sec sections
 
The A96020 voice recording module offers true single chip solid state storage capability and requires no software or micro-controller support. It provides high quality recording and playback with dual 20 second message. Sampling rate is 3.2K. Size: 34 x 23 x 11 mm. All you need to do is add a speaker (not included) and 5V DC Power (not included). Features - Non volatile flash memory technology - No battery back up required - User friendly, easy to operate - Slide switch for record or play back - Separate key to trigger message 1 or 2 - Low power consumption - LED to indicate recording and playback - Built-in condenser mic - Automatic power down - 5-6V Operation.

OPTIONAL ITEMS (Not included):
2 x (BB089) connector cable to connect the voice recorder to a speaker and power source.
1 x (PB244) Speaker
1 x Battery holder that can hold either 4 x AAA or 4 x AA or 4 x C or 4 x D cells. See our battery holders.

(A96020)
Quantity
Price
1 – 9$7.55
10 – 99$6.95
100 – 999$5.95
1000 +$4.95

  (Assembled and Tested)  
  A96020  
  71  
 
This web store and web site powered by NetSuite ecommerce software