INTERVAL TIMER KIT

Shopping Cart

	Your Cart is Empty
	View Cart

INTERVAL TIMER KIT

Click here for Manual

For intermittent operation of circuits and equipment. Blinking light, video/photo single frame shooting, slide projector control, miniature models.

Specifications
output relay with dry switch-over contact: 3A/24V
pulse time adjustable: between 0.5 and 5 sec.
pause time adjustable: between 2.5 and 60 sec.
power supply: 12V DC / 100mA
dimensions: 1.6" x 3.4" (Out of Stock)

Quantity	Price
1 – 9	$5.45
10 – 99	$4.55
100 +	$3.95

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		MK111
Quantity Available:		0

Tell a Friend

Related items are:

INTERVAL TIMER (Assembled)

Quantity	Price
1 – 9	$15.82
10 – 99	$14.99
100 +	$13.74

Skill Level of Item:		(Assembled and Tested)
Product #		VM136
Quantity Available:		17

You might also consider these items:

20 second voice recorder/playback module (A93010/A96010)

PLEASE NOTE: A96010 or A93010 is supplied depending on availability. Currently only A93010 is available and is the one that is been sold. A96010 is not currently available. The small size is because the IC is in Chip-on-board form. One button is pushed down to record the message. The electret microphone is on the board. The LED turns on during this time. The other button just has to be momentarily pressed to replay the message. A second momentary press during playback will stop the playback. Sampling rate is 4K. All you have to add is the speaker (not included) and 5V DC power (not included). The record play time is determined by the 52K resistor. If you change it to 89K you will get 30 seconds but at a reduced sampling rate. Operating current 25mA. Standby current 10 uA. Size: 34 x 23 x 11 mm. The module comes supplied as you see it in the photo.

OPTIONAL ITEMS (Not included):
2 x (BB089) connector cable to connect the voice recorder to a speaker and power source.
1 x (PB244) Speaker
1 x Battery holder that can hold either 4 x AAA or 4 x AA or 4 x C or 4 x D cells. See our battery holders.

(A96010 & A93010)

Quantity	Price
1 – 9	$6.60
10 – 99	$5.95
100 – 999	$4.95
1000 +	$3.95

Skill Level of Item:		(Assembled and Tested)
Product #		A96010
Quantity Available:		128

..........................

Audio to light modulator kit

A music-to-light modulator is a circuit which controls the intensity of one or more lights in response to an audio input. The kit is ideal to give the rhythm to any party or disco without much money. Very safe operation as it uses an opto-coupler as a coupling device between the audio and the mains controlling stages of the circuit.
Input trigger voltage: 2.3 - 2.5V (min)
Operating voltage: 110 or 250 VAC
Power handling: 220W @ 110V or 500W @ 250V
PCB size: 2.16" x 1.63" (To help in the decision to select an enclosure keep in mind that the heat sink used in the kit is about 1" tall.)
PLEASE NOTE, THIS KIT USES 120V MAINS ELECTRICITY AND SHOULD NOT BE ATTEMPTED BY ANYONE WITHOUT THE PROPER SKILL LEVEL. THIS SHOULD ALSO BE BUILT IN A SUITABLE PLASTIC ENCLOSURE.
(CPS12)

Quantity	Price
1 – 9	$14.82
10 – 99	$14.04
100 +	$12.87

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS12
Quantity Available:		40

..........................

Voice Recording Module 2 x 20sec sections

The A96020 voice recording module offers true single chip solid state storage capability and requires no software or micro-controller support. It provides high quality recording and playback with dual 20 second message. Sampling rate is 3.2K. Size: 34 x 23 x 11 mm. All you need to do is add a speaker (not included) and 5V DC Power (not included). Features - Non volatile flash memory technology - No battery back up required - User friendly, easy to operate - Slide switch for record or play back - Separate key to trigger message 1 or 2 - Low power consumption - LED to indicate recording and playback - Built-in condenser mic - Automatic power down - 5-6V Operation.

OPTIONAL ITEMS (Not included):
2 x (BB089) connector cable to connect the voice recorder to a speaker and power source.
1 x (PB244) Speaker
1 x Battery holder that can hold either 4 x AAA or 4 x AA or 4 x C or 4 x D cells. See our battery holders.

(A96020)

Quantity	Price
1 – 9	$8.89
10 – 99	$8.42
100 – 999	$7.72
1000 +	$4.95

Skill Level of Item:		(Assembled and Tested)
Product #		A96020
Quantity Available:		73

..........................

audio amplifier 1W (LM386) kit

A kit module designed to be used as a building block in a larger project. The semiconductor LM386 is a general purpose power amplifier designed for use in low voltage applications. Gain may be set between 20 and 200. LM386 data sheet included. Supply voltage: 4 to 12V(CPS17)
PCB size: 1.5in x 1.25in (38mm x 31mm)

Quantity	Price
1 – 9	$10.83
10 – 99	$10.26
100 +	$9.41

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS17
Quantity Available:		21

..........................

KC7783 PIR Detector Module (Assem and tested)

This is a fully assembled and tested miniature PIR module (KC7783 with KC778B IC) with only 3 connections: Power, Ground & Output. Rated for 4 - 12VDC input power. Uses RE200B PIR sensor. Output is an active high pulse of approx. 0.5 seconds and remains active as long as there is motion. Range up to 10 feet. PCB size: 35mm x 25mm(CPS76)

Quantity	Price
1 – 9	$9.45
10 – 99	$7.95
100 – 999	$6.95
1000 +	$5.45

Skill Level of Item:		(Component or Part)
Product #		CPS76
Quantity Available:		972

..........................

2 Screw Terminal Blocks Pitch = 5mm

Features
blocks are stackable
Specifications
number of contacts: 2
body: glass-filled polyester (ULM94VO)
contact: tin-plated brass (CuZn)
wire protection: stainless steel
pitch: 5mm
mounting hole: Ø1.5mm
current rating: max. 16A / way
operating temperature: -33°C to +120°C
soldering temperature: +260°C (max. 10 seconds)
color: blue
(JB044)

Quantity	Price
1 – 9	$0.21
10 – 99	$0.18
100 – 999	$0.16
1000 +	$0.12

Skill Level of Item:		(Component or Part)
Product #		JB044
Quantity Available:		63

..........................

Multi Mode Timer (version II) - 8 to 8192sec (2.3h)

A 555 timer IC can be set to 1 second oscillation. The 555 output is fed to a 4020B ripple counter IC. Eleven time outputs from the counter is jumper selectable to an on-board relay. PCB dimensions: 58mm x 53mm.
Power supply: 12VDC (CPS152)

Quantity	Price
1 – 9	$14.82
10 – 99	$14.04
100 +	$12.87

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS152
Quantity Available:		7

..........................

Battery clip for 9V PP3 Battery

Specifications
I-type
low-cost
(SNAP9V)

Quantity	Price
1 – 9	$0.21
10 – 99	$0.18
100 +	$0.16

Skill Level of Item:		(Component or Part)
Product #		SNAP9V
Quantity Available:		72

..........................

IR LIGHT BARRIER (Out of Stock)

Applications : announce visitors, warn against burglars, set boundaries, for science projects,...

Specifications

audible (85dB) and visible (LED) alert
range: 3.3ft to 13ft
on/off switch provided
power supply:
transmitter: 9V DC / 50mA max.
receiver: 9V DC / 20mA max.
9V battery holder and adapter jack included
dimensions:
transmitter: 2.2" x 1.6"
receiver: 3.9" x 2.0"
not recommended for outdoor use
(MK120)

Quantity	Price
1 – 9	$7.18
10 – 99	$6.80
100 +	$6.24

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		MK120
Quantity Available:		0