AM/FM ANTENNA AMPLIFIER

Shopping Cart

	Your Cart is Empty
	View Cart

This amplifier provides 22dB gain wherever you need it. DC power supply directly or via the coax cable. Metal housing included.

Specifications

gain: 22dB
power supply: 12V to 15V / 3mA
input- and output impedance: 50 - 75ohm
frequency range: 10MHz to 150MHz
dimensions: 3.4" x 1.4" x 0.9"

Extra Info
- Hints

Put the amplifier as close as possible to the antenna.
(K2622)

Quantity	Price
1 – 9	$16.72
10 – 99	$15.53
100 +	$15.01

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		K2622
Quantity Available:		5

Tell a Friend

You might also consider these items:

Toy motor kit

Construct a working DC Motor. This clever kit has been delighting children for decades. All parts provided, including: 2 coils of copper wire; base; field pole; armature core; brushes; all fasteners. Instruction booklet with theory and experiments included.
Operates on 3 to 6 volt batteries (not included). (CPN135S)

Quantity	Price
1 – 9	$5.45
10 – 99	$5.25
100 +	$4.95

Skill Level of Item:		(Kit - No Soldering Required)
Product #		CPN135S
Quantity Available:		67

IR Door Minder

This kit uses an infrared (IR) beam to monitor door & passage-ways or any other area. When the beam is broken a relay is tripped which can be used to sound a bell or alarm. Suitable for detecting customers entering a shop, cars coming up a driveway, etc. The IR beam is very strong. Distances over 25 yards can be monitored with this kit. A 12VDC unregulated supply is required to power the kit. A 12V wall adaptor is fine. Only one power supply needs to be used to power both units. The relays in this kit are rated to switch mains voltages. With power applied the relay is normally operated and only releases when the beam is broken. The relay contacts labelled “NO” (Normally Open) and “NC” (Normally Closed) refer to when the relay is released. The plastic tube is to put over the IR LED to direct its beam. This is needed when the barrier is only a few yards apart. IR transmitter PCB size:: 45mm x 30mm (1.77" x 1.18")
IR receiver PCB size:: 50mm x 48mm (1.97" x 1.89") (CPS130)

Quantity	Price
1 – 9	$21.09
10 – 99	$19.98
100 +	$18.32

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS130
Quantity Available:		13

audio amplifier 1W (LM386) kit

A kit module designed to be used as a building block in a larger project. The semiconductor LM386 is a general purpose power amplifier designed for use in low voltage applications. Gain may be set between 20 and 200. LM386 data sheet included.
Supply voltage: 4 to 12V(CPS17)

Quantity	Price
1 – 9	$9.69
10 – 99	$9.18
100 +	$8.42

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS17
Quantity Available:		23

Negative or Positive ION generator

Mains powered ion generator which may be made into a negative or positive ion generator depending on the orientation of the 30 diodes. A neon light indicates whether the kit is on or off. The kit must be built into a box for routine operation. The use of this circuit will greatly benefit your health and will give you a feeling of comfort. It helps clean the air from dust, pollen, smoke and pollution. The increased concentration of negative ions in the air makes it feel fresher, brings a feeling of well being, helps in reducing stress and effectively reduces the severity of symptoms in some respiratory troubles. PCB size: 108mm x 50mm. (4.25"x1.97")
Supply voltage: 120 VAC (CPS57)

Quantity	Price
1 – 9	$14.25
10 – 99	$13.50
100 +	$12.38

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS57
Quantity Available:		6

Melody Card X-mas Tunes (Jingle Bells + Santa Claus + We Wish You a Merry X'mas) COB Module

Complete melody card unit- 'Three Christmas Carols' (Jingle Bells + Santa Claus + We Wish You a Merry X'mas) Melody IC COB, battery and piezo all ready to play. As found in Christmas cards and books which play when you open the page. Self-adhesive backing. Tune repeats continuously while power is connected. Total of 128 notes. Cmos LSI. (SG14)

Quantity	Price
1 – 9	$0.99
10 – 99	$0.85
100 – 999	$0.75
1000 – 9999	$0.65
10000 +	$0.55

Skill Level of Item:		(Assembled and Tested)
Product #		SG14
Quantity Available:		309

MINI 3 1/2 DIGIT DMM - 19 RANGES

Features

automatic polarity indication
voltage measurements: AC 500V and DC 500V max.
current measurements: DC 10A max.
resistance measurements: 2Mohm
diode and transistor (hFE) test
packaging: blister
(DVM810)

Quantity	Price
1 – 9	$5.47
10 – 99	$5.18
100 +	$4.75

Skill Level of Item:		(Assembled and Tested)
Product #		DVM810
Quantity Available:		11

POLICE SIREN

Enter the world of amazing electronic sounds and noises. Create or imitate sirens of all kinds by adjusting 3 trimmers. Powerful sound with a 2W amplifier on the PCB.

Specifications

power supply: 8 - 14V DC / 1A
dimensions: 3.1" x 2.2"
recommended housing: -
recommended transformer: - (K2604)

Quantity	Price
1 – 9	$11.97
10 – 99	$11.34
100 +	$10.40

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		K2604
Quantity Available:		5

4 CHANNEL RUNNING LIGHT

The running light module is the perfect addition to your existing system if you are looking to create the kind of effects used in a disco. The speed of this module can be adjusted manually. All the outputs are equipped with LED indication.

Specifications
suppressed according to EN55015
adjustable speed for the switching of the charge
led indication
AC power: 110 to 240VAC
max. load per channel: 450W (240VAC) / 230W (115VAC)
speed adjustable between: 0.2 and 3Hz
dimensions: 3.9" x 3.2" x 1.4" (K8032)

Quantity	Price
1 – 9	$30.23
10 – 99	$28.08
100 +	$27.14

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		K8032
Quantity Available:		3

USB EXPERIMENT INTERFACE BOARD

The K8055 interface board has 5 digital input channels and 8 digital output channels. In addition, there are two analogue inputs and two analogue outputs with 8 bit resolution. The number of inputs/outputs can be further expanded by connecting more (up to a maximum of four) cards to the PC's USB connectors. All communication routines are contained in a Dynamic Link Library (DLL). You may write custom Windows (98SE, 2000, Me, XP) applications in Delphi, Visual Basic, C++ Builder or any other 32-bit Windows application development tool that supports calls to a DLL. (K8055)

Quantity	Price
1 – 99	$43.75
100 +	$39.28

Skill Level of Item:		(Kit - Complex Soldering Required)
Product #		K8055
Quantity Available:		7