DYNAMIC MICROPHONE

Shopping Cart

	Your Cart is Empty
	View Cart

DYNAMIC MICROPHONE

Unidirectional dynamic microphones.

Specifications

frequency response: 50-13KHz
sensitivity: -50 ±3dB
impedance: 600 ohm ±30%
cable length: 3m with 6.35mm plug
color: black
weight: 155g
(MIC3B)

Quantity	Price
1 – 9	$3.93
10 – 99	$3.73
100 +	$3.42

Skill Level of Item:		(Assembled and Tested)
Product #		MIC3B
Quantity Available:		5

Tell a Friend

You might also consider these items:

Battery clip for 9V PP3 Battery

Specifications
I-type
low-cost
(SNAP9V)

Quantity	Price
1 – 9	$0.21
10 – 99	$0.18
100 +	$0.16

Skill Level of Item:		(Component or Part)
Product #		SNAP9V
Quantity Available:		77

40 pin Univ ZIF Socket wide slot

Solder directly to PCB or plug directly into IC socket.
Screw mounting holes for more reliable operation.
(BB007)

Quantity	Price
1 – 9	$12.95
10 – 99	$11.95
100 +	$10.95

Skill Level of Item:		(Component or Part)
Product #		BB007
Quantity Available:		15

Toy motor kit

Construct a working DC Motor. This clever kit has been delighting children for decades. All parts provided, including: 2 coils of copper wire; base; field pole; armature core; brushes; all fasteners. Instruction booklet with theory and experiments included.
Operates on 3 to 6 volt batteries (not included). (CPN135S)

Quantity	Price
1 – 9	$5.45
10 – 99	$5.25
100 +	$4.95

Skill Level of Item:		(Kit - No Soldering Required)
Product #		CPN135S
Quantity Available:		51

Audio to light modulator kit

A music-to-light modulator is a circuit which controls the intensity of one or more lights in response to an audio input. The kit is ideal to give the rhythm to any party or disco without much money. Very safe operation as it uses an opto-coupler as a coupling device between the audio and the mains controlling stages of the circuit.
Input trigger voltage: 2.3 - 2.5V (min)
Operating voltage: 110 or 250 VAC
Power handling: 220W @ 110V or 500W @ 250V
PCB size: 2.16" x 1.63"
PLEASE NOTE, THIS KIT USES 120V MAINS ELECTRICITY AND SHOULD NOT BE ATTEMPTED BY ANYONE WITHOUT THE PROPER SKILL LEVEL. THIS SHOULD ALSO BE BUILT IN A SUITABLE PLASTIC ENCLOSURE.
(CPS12)

Quantity	Price
1 – 9	$11.97
10 – 99	$11.34
100 +	$10.40

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS12
Quantity Available:		59

Mini-Vox and Relay kit

The idea behind a VOX (voice activated switch) is that instead of the user pressing a switch to activate a relay, the sound of the users voice itself activates the relay. This gives hands-free control over devices like tape recorders. Power supply needed: 12VDC center positive 2.5mm jack. Electret microphone to pick up the sound is included. PCB size: 44mm x 48mm (1.73inch x 1.89inch).
(CPS126)

Quantity	Price
1 – 9	$11.97
10 – 99	$11.34
100 +	$10.40

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS126
Quantity Available:		16

Melody Card X-mas Tunes (Jingle Bells + Santa Claus + We Wish You a Merry X'mas) COB Module

Complete melody card unit- 'Three Christmas Carols' (Jingle Bells + Santa Claus + We Wish You a Merry X'mas) Melody IC COB, battery and piezo all ready to play. As found in Christmas cards and books which play when you open the page. Self-adhesive backing. Tune repeats continuously while power is connected. Total of 128 notes. Cmos LSI. (SG14)

Quantity	Price
1 – 9	$0.99
10 – 99	$0.85
100 – 999	$0.75
1000 – 9999	$0.65
10000 +	$0.55

Skill Level of Item:		(Assembled and Tested)
Product #		SG14
Quantity Available:		308

20 second voice recorder/playback module (A93010/A96010)

PLEASE NOTE: A96010 or A93010 is supplied depending on availability. Currently only A93010 is available and is the one that is been sold. A96010 is not currently available. The small size is because the IC is in Chip-on-board form. One button is pushed down to record the message. The electret microphone is on the board. The LED turns on during this time. The other button just has to be momentarily pressed to replay the message. A second momentary press during playback will stop the playback. Sampling rate is 4K. All you have to add is the speaker (not included) and 5V DC power (not included). The record play time is determined by the 52K resistor. If you change it to 89K you will get 30 seconds but at a reduced sampling rate. Operating current 25mA. Standby current 10 uA. Size: 34 x 23 x 11 mm. The module comes supplied as you see it in the photo.

OPTIONAL ITEMS (Not included):
2 x (BB089) connector cable to connect the voice recorder to a speaker and power source.
1 x (PB244) Speaker
1 x Battery holder that can hold either 4 x AAA or 4 x AA or 4 x C or 4 x D cells. See our battery holders.

(A96010 & A93010)

Quantity	Price
1 – 9	$6.60
10 – 99	$5.95
100 – 999	$4.95
1000 +	$3.95

Skill Level of Item:		(Assembled and Tested)
Product #		A96010
Quantity Available:		174

Connector 3.5mm mono jack plug

DB306

Quantity	Price
1 – 9	$0.37
10 – 99	$0.31
100 +	$0.23

Skill Level of Item:		(Component or Part)
Product #		DB306
Quantity Available:		24

Connector 3.5mm stereo jack plug

DB307

Quantity	Price
1 – 9	$0.51
10 – 99	$0.43
100 +	$0.32

Skill Level of Item:		(Component or Part)
Product #		DB307
Quantity Available:		8