EUROCARD FULL LINE - 3.9" x 3.1"

Shopping Cart

	Your Cart is Empty
	View Cart

EUROCARD FULL LINE - 3.9" x 3.1" - FR4

Specifications

track: full line
material: single-sided board, epoxy FR-4, 0.06", 1/0 oz. tinned copper, HASL
bore Ø: 0.041"
dimensions: 3.9"x3.1"
compatible with eurodin connectors DIN41617 and DIN41612
packaging: 1pc in blister
(ECL1/2)

Quantity	Price
1 – 9	$2.91
10 – 99	$2.75
100 +	$2.52

Skill Level of Item:		(Component or Part)
Product #		ECL1/2
Quantity Available:		9

Tell a Friend

You might also consider these items:

CAP 100nF Ceramic Capacitors 50 V

C100NC

Quantity	Price
1 – 9	$0.35
10 – 99	$0.29
100 +	$0.22

Skill Level of Item:		(Component or Part)
Product #		DB202
Quantity Available:		57

Toy motor kit

Construct a working DC Motor. This clever kit has been delighting children for decades. All parts provided, including: 2 coils of copper wire; base; field pole; armature core; brushes; all fasteners. Instruction booklet with theory and experiments included.
Operates on 3 to 6 volt batteries (not included). (CPN135S)

Quantity	Price
1 – 9	$5.45
10 – 99	$5.25
100 +	$4.95

Skill Level of Item:		(Kit - No Soldering Required)
Product #		CPN135S
Quantity Available:		51

Regulated Power Supply

Kit accepts an unregulated AC or DC input. The user supplies a standard 3 pin voltage regulator from 5 volts (using a 7805) to 24 volts (7824). The full range of possible regulators is: 7805, 7806, 7808, 1810, 7812, 7815, 7818 & 7824. Large heat-sink provided. PCB size: 64mm x 40mm (2 1/2" x 1 1/2")(CPS60)

Quantity	Price
1 – 9	$7.98
10 – 99	$7.56
100 +	$6.93

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS60
Quantity Available:		11

Power supply voltage adj. 1.5 to 30V kit (Out of Stock)

This is a basic adjustable voltage power supply using the popular three pin regulator, LM317T. You can select any voltage between 1.5V and 30V using a potentiometer. The LM317T is rated at 1.5A so you must use a larger heat sink when drawing high currents. Unregulated AC or DC input via terminal block or power jack. Requires a suitable transformer.(CPS68)

Quantity	Price
1 – 9	$10.26
10 – 99	$9.72
100 +	$8.91

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS68
Quantity Available:		0

20 second voice recorder/playback module (A93010/A96010)

PLEASE NOTE: A96010 or A93010 is supplied depending on availability. Currently only A93010 is available and is the one that is been sold. A96010 is not currently available. The small size is because the IC is in Chip-on-board form. One button is pushed down to record the message. The electret microphone is on the board. The LED turns on during this time. The other button just has to be momentarily pressed to replay the message. A second momentary press during playback will stop the playback. Sampling rate is 4K. All you have to add is the speaker (not included) and 5V DC power (not included). The record play time is determined by the 52K resistor. If you change it to 89K you will get 30 seconds but at a reduced sampling rate. Operating current 25mA. Standby current 10 uA. Size: 34 x 23 x 11 mm. The module comes supplied as you see it in the photo.

OPTIONAL ITEMS (Not included):
2 x (BB089) connector cable to connect the voice recorder to a speaker and power source.
1 x (PB244) Speaker
1 x Battery holder that can hold either 4 x AAA or 4 x AA or 4 x C or 4 x D cells. See our battery holders.

(A96010 & A93010)

Quantity	Price
1 – 9	$6.60
10 – 99	$5.95
100 – 999	$4.95
1000 +	$3.95

Skill Level of Item:		(Assembled and Tested)
Product #		A96010
Quantity Available:		194

Relay 12V coil 10A/240VAC contacts (SPDT)

Relay 12V, 320 Ohm Coil 10A/240Vac Contacts, SPDT 17.5 x 22.5mm, 15mm height. Operating time: Approx 5ms. Release time Approx 10ms. Temperature Range -55 C to 85 C.
(DB003)

Quantity	Price
1 – 9	$1.53
10 – 99	$1.29
100 +	$1.16

Skill Level of Item:		(Component or Part)
Product #		DB003
Quantity Available:		15

(Not Pictured)

BC547B Transistor NPN 0.1A HFE200 (TO92)

DB210

Quantity	Price
1 – 99	$0.08
100 +	$0.05

Skill Level of Item:		(Component or Part)
Product #		DB210
Quantity Available:		52

(Not Pictured)

5mm Bi-Colour red/green (2 leg) 2.0 / 2.1 V, 20.0 / 15.0 mcd

Note: Max. current: 20mA A red and green LED integrated into one package. For the two terminal version the colour is determined by the polarity of the voltage applied to the terminals of the LED. With the three terminal LED the center pin is the cathode (negative lead) and the outer pins are the anodes (positive leads) of the red and green LEDs. Indicated typical forward voltage Vf for 15mA LED current. The indicated luminous intensity Iv (mcd) is typical.
(DB246)

Quantity	Price
1 – 9	$0.32
10 – 99	$0.27
100 +	$0.20

Skill Level of Item:		(Component or Part)
Product #		DB246
Quantity Available:		41

(Not Pictured)

1N4148 Silicon Signal Diode 100V 75mA (Out of Stock)

HB052

Quantity	Price
1 – 9	$0.08
10 – 99	$0.02
100 +	$0.02

Skill Level of Item:		(Component or Part)
Product #		HB052
Quantity Available:		0