SYMMETRIC 1A POWER SUPPLY

Shopping Cart

	Your Cart is Empty
	View Cart

illustrated english manual

translated assembly manual (nl - fr - de - es)

Features
low cost universal symmetric power supply
just add a suitable transformer and a heatsink
ideal for e.g. op-amp applications, amplifiers, ...
trimmers can be replaced by potmeters to allow continuous adjustment of output voltage
LED output indicators
compact size

Specifications
positive and negative output adjustable between 1.2 and 24VDC
output current: up to 2 x 1A continuous (with suitable heatsink)
max. input voltage: 2 x 24VAC
very good line and load regulation
low ripple
short circuit protection
thermal protection
optional heat sink: HS4003 (for maximum 20W dissipation)
dimensions: 3.1" x 2.0" x 0.9" (K8042)

Quantity	Price
1 – 9	$15.56
10 – 99	$14.74
100 +	$13.51

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		K8042
Quantity Available:		8

Tell a Friend

You might also consider these items:

Positive Adjustable Power Supply Module

Compact positive adjustable power supply +/- 1.5V to 35V depending on input power source. On-board heatsink. It is ideal for powering any application requiring a DC supply at current levels up to 1.5A
FEATURES:
· Output reverse polarity and back-voltage protection
· LED power on indication
· On board heatsink for IC regulator
· Variable output voltage
· AC or DC input voltage
· Low noise (uses linear regulator)
· Screw terminals for input, output and LED indicator
· PCB size: (84 x 37 mm) (3.1" x 1.5")
This kit can be combined with Kit CPS125 to create a dual-rail supply. The kit is constructed on a single-sided printed circuit board (PCB).
(CPS124)

Quantity	Price
1 – 9	$14.25
10 – 99	$13.50
100 +	$12.38

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS124
Quantity Available:		9

TDA7052 Amplifier Module 1W

A 1W power amplifier building block designed to be part of a larger project. Ideal as a low power battery operated amplifier (from 3 to 15V) driving an 8 ohm speaker. The Philips TDA7052 is a general purpose amplifier. No heatsink needed. Short circuit protected.(CPS27)

Quantity	Price
1 – 9	$9.12
10 – 99	$8.64
100 +	$7.92

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS27
Quantity Available:		22

Basic Power Supply Module (incl box)

Batteries soon become an expensive way to power your electronic kits and electronic games. This is a basic power supply in a box using two 7805 regulators. Input up to 20V AC from a transformer or power pack. Two regulated outputs are available - one fixed at 5V, the other variable. Good introduction to three terminal regulators.(CPS4)

Quantity	Price
1 – 9	$12.54
10 – 99	$11.88
100 +	$10.89

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS4
Quantity Available:		6

Regulated Power Supply

Kit accepts an unregulated AC or DC input. The user supplies a standard 3 pin voltage regulator from 5 volts (using a 7805) to 24 volts (7824). The full range of possible regulators is: 7805, 7806, 7808, 1810, 7812, 7815, 7818 & 7824. Large heat-sink provided. PCB size: 64mm x 40mm (2 1/2" x 1 1/2")(CPS60)

Quantity	Price
1 – 9	$7.98
10 – 99	$7.56
100 +	$6.93

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS60
Quantity Available:		11

1W Stereo Audio Amp Module KA2209 (ver 2

This stereo amplifier module uses the Samsung KA2209 8-pin IC. This is equivalent to the TDA2822. The circuit is the standard text-book circuit for this chip. No heat sink is required. 2-9 volt operation. (CPS87) (version 2)

Quantity	Price
1 – 9	$13.11
10 – 99	$12.42
100 +	$11.39

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS87
Quantity Available:		11

Bidirectional DC Motor Speed Controller

This kit allows controlling the speed of a DC motor in both the forward and reverse direction. The range of control is from fully OFF to fully ON in both directions. Normally, switches are used to change the direction of rotation of a DC motor. Change the polarity of the applied voltage and the motor spins the other way! However this has the disadvantage that a DPDT switch has to be added to change the polarity of the applied voltage. Now you have two things to control the motor – a direction switch as well as the speed control. Also, it is not a good idea to suddenly reverse the voltage on a DC motor while it is spinning. It can cause a current surge that can burn out the speed controller. Not to mention any mechanical stress it can cause as well. PCB size: 93mm x 42mm (3.625 x 1.625 inch) (CPS166)

Quantity	Price
1 – 9	$24.23
10 – 99	$22.50
100 +	$21.75

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS166
Quantity Available:		31

TDA2002 / TDA2003 Amplifier Module kit

A proven & popular power amplifier building block for use in any audio project. Power output is dependent on the supply voltage and load resistance. Over 10W is typical for a 16V supply into a 2 ohm speaker. A 12V supply into a 4 ohm speaker will deliver around 4W. Small heatsink provided. In late 2000 the LM383 was discontinued but the TDA2002 is a direct replacement for the LM383. (CPS47)

Quantity	Price
1 – 9	$14.25
10 – 99	$13.50
100 +	$12.38

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS47
Quantity Available:		22

MINI 3 1/2 DIGIT DMM - 19 RANGES

Features

automatic polarity indication
voltage measurements: AC 500V and DC 500V max.
current measurements: DC 10A max.
resistance measurements: 2Mohm
diode and transistor (hFE) test
packaging: blister
(DVM810)

Quantity	Price
1 – 9	$5.47
10 – 99	$5.18
100 +	$4.75

Skill Level of Item:		(Assembled and Tested)
Product #		DVM810
Quantity Available:		11

USB EXPERIMENT INTERFACE BOARD

The K8055 interface board has 5 digital input channels and 8 digital output channels. In addition, there are two analogue inputs and two analogue outputs with 8 bit resolution. The number of inputs/outputs can be further expanded by connecting more (up to a maximum of four) cards to the PC's USB connectors. All communication routines are contained in a Dynamic Link Library (DLL). You may write custom Windows (98SE, 2000, Me, XP) applications in Delphi, Visual Basic, C++ Builder or any other 32-bit Windows application development tool that supports calls to a DLL. (K8055)

Quantity	Price
1 – 99	$43.75
100 +	$39.28

Skill Level of Item:		(Kit - Complex Soldering Required)
Product #		K8055
Quantity Available:		7