MINI 3 1/2 DIGIT DMM

Shopping Cart

	Your Cart is Empty
	View Cart

MINI 3 1/2 DIGIT DMM - 19 RANGES

Specifications

DC voltage: 200m/2000m/20/200/500V
basic accuracy: ±0.5% (±0.25% for 200mV range)
input impedance: -
maximum input: 500V
AC voltage: 200/500V
basic accuracy: ±1.2%
input impedance: -
frequency range: 45-450Hz
maximum input: 500V
DC current: 200µ/2000µ/20m/200m/10A
basic accuracy: ±1.0% (±2.0% for 10A range)
overload protection: 200mA 250V fuse (10A-range is not fuse-protected)
AC current: -
basic accuracy: -
overload protection: -
resistance: 200/2000/20k/200k/2000k
basic accuracy: ±0.8% (±1.0% for 2000k range)
overload protection: 220Vrms max. for 15 seconds
capacitance: -
accuracy: -
inductance: -
accuracy: -
frequency: -
basic accuracy: -
overload protection: -
temperature: -
basic accuracy: -
overrange: yes
continuity buzzer: -
transistor test: yes
diode test: yes
low-battery indication: yes
maximum display: 3 1/2
LCD display size: 0.5"
ranging mode: manual
data hold: no
backlight: no
dimensions: -
weight (with battery): -
power supply: 12V battery
packing: -
accessories: manual / test leads / 1 GP23GA 12V battery
auto power-off: no

Features

automatic polarity indication
voltage measurements: AC 500V and DC 500V max.
current measurements: DC 10A max.
resistance measurements: 2Mohm
diode and transistor (hFE) test
packaging: blister
(DVM810)

Quantity	Price
1 – 9	$5.64
10 – 99	$5.35
100 +	$4.90

Skill Level of Item:		(Assembled and Tested)
Product #		DVM810
Quantity Available:		14

Tell a Friend

You might also consider these items:

Toy motor kit

Construct a working DC Motor. This clever kit has been delighting children for decades. All parts provided, including: 2 coils of copper wire; base; field pole; armature core; brushes; all fasteners. Instruction booklet with theory and experiments included.
Operates on 3 to 6 volt batteries (not included). (CPN135S)

Quantity	Price
1 – 9	$5.45
10 – 99	$5.25
100 +	$4.95

Skill Level of Item:		(Kit - No Soldering Required)
Product #		CPN135S
Quantity Available:		63

DESOLDERING BRAID 59"

Specifications

Ø: 0.08"
length: 59"
(DESOLDER)

Quantity	Price
1 – 9	$1.28
10 – 99	$1.08
100 +	$0.97

Skill Level of Item:		(Component or Part)
Product #		DESOLDER
Quantity Available:		11

SOLDERING IRON 20W / 110V

A high-quality, mains-powered soldering iron of 20W for general purposes.

Specifications

power supply: 20W / 110V AC
UL approved
spare bit: BITU20
(VTS20U)

Quantity	Price
1 – 9	$5.30
10 – 99	$5.02
100 +	$4.60

Skill Level of Item:		(Assembled and Tested)
Product #		VTS20U
Quantity Available:		7

3 1/2 DMM - 10A / HOLD FUNCTION / BACKLIGHT (Out of Stock)

Features

DMM with automatic polarity function and 3 ½ digit LCD display
measurements: DC current up to 10A, AC and DC voltage up to 600V, resistance up to 2Mohm
diode, transistor and continuity test with buzzer
data-hold function and backlight
with protection holster
(DVM850BL)

Quantity	Price
1 – 9	$12.83
10 – 99	$12.15
100 +	$11.14

Skill Level of Item:		(Assembled and Tested)
Product #		DVM850BL
Quantity Available:		0

20 second voice recorder/playback module (A93010/A96010)

PLEASE NOTE: A96010 or A93010 is supplied depending on availability. Currently only A93010 is available and is the one that is been sold. A96010 is not currently available. The small size is because the IC is in Chip-on-board form. One button is pushed down to record the message. The electret microphone is on the board. The LED turns on during this time. The other button just has to be momentarily pressed to replay the message. A second momentary press during playback will stop the playback. Sampling rate is 4K. All you have to add is the speaker (not included) and 5V DC power (not included). The record play time is determined by the 52K resistor. If you change it to 89K you will get 30 seconds but at a reduced sampling rate. Operating current 25mA. Standby current 10 uA. Size: 34 x 23 x 11 mm. The module comes supplied as you see it in the photo.

OPTIONAL ITEMS (Not included):
2 x (BB089) connector cable to connect the voice recorder to a speaker and power source.
1 x (PB244) Speaker
1 x Battery holder that can hold either 4 x AAA or 4 x AA or 4 x C or 4 x D cells. See our battery holders.

(A96010 & A93010)

Quantity	Price
1 – 9	$6.60
10 – 99	$5.95
100 – 999	$4.95
1000 +	$3.95

Skill Level of Item:		(Assembled and Tested)
Product #		A96010
Quantity Available:		146

Battery clip for 9V PP3 Battery (Out of Stock)

Specifications
I-type
low-cost
(SNAP9V)

Quantity	Price
1 – 9	$0.21
10 – 99	$0.18
100 +	$0.16

Skill Level of Item:		(Component or Part)
Product #		SNAP9V
Quantity Available:		0

POWERFUL DESOLDERING PUMP

Features

TEFLON-nozzle

Specifications

length: 10.8"
(VTD1)

Quantity	Price
1 – 9	$2.95
10 – 99	$2.75
100 +	$2.52

Skill Level of Item:		(Assembled and Tested)
Product #		VTD1
Quantity Available:		7

LOW-COST IC EXTRACTION TOOL

Specifications

size: 4.1"
(VTIC)

Quantity	Price
1 – 9	$1.71
10 – 99	$1.44
100 +	$1.30

Skill Level of Item:		(Assembled and Tested)
Product #		VTIC
Quantity Available:		25

INTERVAL TIMER KIT

For intermittent operation of circuits and equipment. Blinking light, video/photo single frame shooting, slide projector control, miniature models.

Specifications
output relay with dry switch-over contact: 3A/24V
pulse time adjustable: between 0.5 and 5 sec.
pause time adjustable: between 2.5 and 60 sec.
power supply: 12V DC / 100mA
dimensions: 1.6" x 3.4"

Quantity	Price
1 – 9	$5.45
10 – 99	$4.55
100 +	$3.95

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		MK111
Quantity Available:		2