2 Screw Terminal Blocks Pitch = 5mm

Shopping Cart

	Your Cart is Empty
	View Cart

Features
blocks are stackable
Specifications
number of contacts: 2
body: glass-filled polyester (ULM94VO)
contact: tin-plated brass (CuZn)
wire protection: stainless steel
pitch: 5mm
mounting hole: Ø1.5mm
current rating: max. 16A / way
operating temperature: -33°C to +120°C
soldering temperature: +260°C (max. 10 seconds)
color: blue
(JB044)

Quantity	Price
1 – 9	$0.21
10 – 99	$0.18
100 – 999	$0.16
1000 +	$0.12

Skill Level of Item:		(Component or Part)
Product #		JB044
Quantity Available:		52

Tell a Friend

You might also consider these items:

CAP 100nF Ceramic Capacitors 50 V

C100NC

Quantity	Price
1 – 9	$0.08
10 – 99	$0.03
100 +	$0.02

Skill Level of Item:		(Component or Part)
Product #		DB202
Quantity Available:		82

20 second voice recorder/playback module (A93010/A96010)

PLEASE NOTE: A96010 or A93010 is supplied depending on availability. Currently only A93010 is available and is the one that is been sold. A96010 is not currently available. The small size is because the IC is in Chip-on-board form. One button is pushed down to record the message. The electret microphone is on the board. The LED turns on during this time. The other button just has to be momentarily pressed to replay the message. A second momentary press during playback will stop the playback. Sampling rate is 4K. All you have to add is the speaker (not included) and 5V DC power (not included). The record play time is determined by the 52K resistor. If you change it to 89K you will get 30 seconds but at a reduced sampling rate. Operating current 25mA. Standby current 10 uA. Size: 34 x 23 x 11 mm. The module comes supplied as you see it in the photo.

OPTIONAL ITEMS (Not included):
2 x (BB089) connector cable to connect the voice recorder to a speaker and power source.
1 x (PB244) Speaker
1 x Battery holder that can hold either 4 x AAA or 4 x AA or 4 x C or 4 x D cells. See our battery holders.

(A96010 & A93010)

Quantity	Price
1 – 9	$6.60
10 – 99	$5.95
100 – 999	$4.95
1000 +	$3.95

Skill Level of Item:		(Assembled and Tested)
Product #		A96010
Quantity Available:		183

40 pin Univ ZIF Socket wide slot

Solder directly to PCB or plug directly into IC socket.
Screw mounting holes for more reliable operation.
(BB007)

Quantity	Price
1 – 9	$12.95
10 – 99	$11.95
100 +	$10.95

Skill Level of Item:		(Component or Part)
Product #		BB007
Quantity Available:		13

Audio to light modulator kit

A music-to-light modulator is a circuit which controls the intensity of one or more lights in response to an audio input. The kit is ideal to give the rhythm to any party or disco without much money. Very safe operation as it uses an opto-coupler as a coupling device between the audio and the mains controlling stages of the circuit.
Input trigger voltage: 2.3 - 2.5V (min)
Operating voltage: 110 or 250 VAC
Power handling: 220W @ 110V or 500W @ 250V
PCB size: 2.16" x 1.63"
PLEASE NOTE, THIS KIT USES 120V MAINS ELECTRICITY AND SHOULD NOT BE ATTEMPTED BY ANYONE WITHOUT THE PROPER SKILL LEVEL. THIS SHOULD ALSO BE BUILT IN A SUITABLE PLASTIC ENCLOSURE.
(CPS12)

Quantity	Price
1 – 9	$13.11
10 – 99	$12.42
100 +	$11.39

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS12
Quantity Available:		42

T8013 TOGGLE SWITCH 1P ON-ON

DB017

Quantity	Price
1 – 9	$2.02
10 – 99	$1.70
100 +	$1.53

Skill Level of Item:		(Component or Part)
Product #		DB017
Quantity Available:		45

BC547B Transistor NPN 0.1A HFE200 (TO92)

DB210

Quantity	Price
1 – 99	$0.08
100 +	$0.05

Skill Level of Item:		(Component or Part)
Product #		DB210
Quantity Available:		12

Toy motor kit

Construct a working DC Motor. This clever kit has been delighting children for decades. All parts provided, including: 2 coils of copper wire; base; field pole; armature core; brushes; all fasteners. Instruction booklet with theory and experiments included.
Operates on 3 to 6 volt batteries (not included). (CPN135S)

Quantity	Price
1 – 9	$5.45
10 – 99	$5.25
100 +	$4.95

Skill Level of Item:		(Kit - No Soldering Required)
Product #		CPN135S
Quantity Available:		71

PC Printer Port Relay Board (kit) (version 2)

Do you have an old PC lying around the house which absolutely no one wants? Then you can convert it into a dedicated controller. Communicate with the real world via the parallel printer port on your PC. Simply connect printer cable from computer to Centronics connector on relay board. There are 8 relays each capable of switching 12VDC/10A or 240VAC/5A. Each relay has an LED to indicate when it is operated. We provide two sets of complete, stand-alone software to control the relays: one works under DOS so you can write your own batch files to control individual relays, the other under Windows 3.1. Needs 12VDC center positive 2.5mm power supply. PCB Size 6.75" x 2.75" (version 2) (CPS74)

Quantity	Price
1 – 9	$31.98
10 – 99	$29.70
100 +	$28.71

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS74
Quantity Available:		6

Relay 12V coil 10A/240VAC contacts (SPDT)

Relay 12V, 320 Ohm Coil 10A/240Vac Contacts, SPDT 17.5 x 22.5mm, 15mm height. Operating time: Approx 5ms. Release time Approx 10ms. Temperature Range -55 C to 85 C.
(DB003)

Quantity	Price
1 – 9	$1.44
10 – 99	$1.22
100 +	$1.10

Skill Level of Item:		(Component or Part)
Product #		DB003
Quantity Available:		23