RE200B-P Pyroelectric Infrared Sensor

Shopping Cart

	Your Cart is Empty
	View Cart

data sheet in pdf format

(BB083)

Quantity	Price
1 – 9	$1.76
10 – 99	$1.65
100 – 999	$1.45
1000 +	$1.35

Skill Level of Item:		(Component or Part)
Product #		BB083
Quantity Available:		132

Tell a Friend

Related items are:

Fresnel lens only (for KC7786)

(BB052) Fresnel Lens ONLY.

Quantity	Price
1 – 9	$0.81
10 – 99	$0.65
100 – 999	$0.55
1000 +	$0.47

Skill Level of Item:		(Component or Part)
Product #		BB052
Quantity Available:		597

..........................

Fresnel lens only (As found on the KC7783 & KC7783R)

(BB194)

Quantity	Price
1 – 9	$0.81
10 – 99	$0.65
100 – 999	$0.55
1000 +	$0.47

Skill Level of Item:		(Component or Part)
Product #		BB194
Quantity Available:		42

You might also consider these items:

Fresnel lens only (for KC7786)

(BB052) Fresnel Lens ONLY.

Quantity	Price
1 – 9	$0.81
10 – 99	$0.65
100 – 999	$0.55
1000 +	$0.47

..........................

KC778B Pir Controller Chip PDIP

Closeout item. Limited Qty available.

(When the last of this PDIP version is sold we will still be carrying the surface mounted version (SOP) please see item # BB055 in this regard.)

Price: $3.75

Skill Level of Item:		(Component or Part)
Product #		BB053
Quantity Available:		2

..........................

Click here for specs, downloads, and more pictures.

KC7783 PIR Detector Module (Assem and tested)

This is a fully assembled and tested miniature PIR module (KC7783 with KC778B IC) with only 3 connections: Power, Ground & Output. Rated for 4 - 12VDC input power. Uses RE200B PIR sensor. Output is an active high pulse of approx. 0.5 seconds and remains active as long as there is motion. Range up to 10 feet. PCB size: 35mm x 25mm(CPS76)

Quantity	Price
1 – 9	$9.45
10 – 99	$7.95
100 – 999	$6.95
1000 +	$5.45

Skill Level of Item:		(Component or Part)
Product #		CPS76
Quantity Available:		593

..........................

KC7783R PIR Detector Module (Low cost version) (Assem and tested)

Mechanical and electrical specs is the same as the KC7783 except for a lower cost IC (KC778B IC) package used in this KC7783R RoHS compliant: YES. (BB054)

Quantity	Price
1 – 9	$8.98
10 – 99	$7.45
100 – 999	$6.75
1000 – 9999	$5.75
10000 +	$4.95

Skill Level of Item:		(Component or Part)
Product #		BB054
Quantity Available:		595

..........................

KC778B Pir Controller Chip SOP

(BB055)

Quantity	Price
1 – 9	$3.75
10 – 99	$2.95
100 – 999	$2.65
1000 – 9999	$2.45
10000 – 99999	$2.35
100000 +	$2.25

Skill Level of Item:		(Component or Part)
Product #		BB055
Quantity Available:		22

..........................

KC7786 PIR sensor module 12v (3pin .1in)

This is a fully assembled and tested miniature PIR module (KC7786 with KC778B COB IC) with only 3 connections: Power, Ground & Output (3 pin terminal of standard 0.1 inch pitch). Rated for 12VDC input power. Uses RE200B PIR sensor. Output is an active high pulse of approx. 0.5 seconds and remains active as long as there is motion. Range up to 10 feet. PCB size: 27mm x 27mm (BB043)

Quantity	Price
1 – 9	$11.35
10 – 99	$9.95
100 – 999	$8.95
1000 – 9999	$8.15
10000 +	$7.45

Skill Level of Item:		(Component or Part)
Product #		BB043
Quantity Available:		196

..........................

PIR Movement Detector

Circuit designed around a recently developed movement IC (KC778B). Circuit utilizes PIR detector and a light dependent resistor (LDR) to provide an optimized circuit that will detect motion up to 6 meters (18 feet) away. Operates on 9-12 VDC. Note that the PIR sensor & the PCB-mounted fresnel lens fit on the other side of the PCB; the solder side. This is to allow the unit to be mounted inside a container with the detecting lens poking out and the controls facing inside the box. PCB dimensions 3 inch x 2 inch. (CPS30)

Quantity	Price
1 – 9	$27.13
10 – 99	$25.20
100 +	$24.36

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS30
Quantity Available:		9

..........................

Preamplifier

A preamplifier to use with an electret or other microphone to boost the signal before feeding into an amplifier. Simple and easy to build. PCB Size: 1.75" x 1.25". Power supply: 6 to 12VDC (Electret microphone Included)

Quantity	Price
1 – 9	$13.68
10 – 99	$12.96
100 +	$11.88

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS98
Quantity Available:		36

..........................

20 second voice recorder/playback module (A93010/A96010)

PLEASE NOTE: This module, part# A96010, could actually be either an A96010 or an A93010 depending on what is in stock at the time. Both are virtually identical and operate the same, but downloadable datasheets are available for each for comparison if necessary. The small size is because the IC is in Chip-on-board form. One button is pushed down to record the message through the on-board electret microphone; A LED turns on during this time. The other button just has to be momentarily pressed to replay the message. A second momentary press during playback will stop the playback. Sampling rate is 4K. All you have to add is the speaker (not included) and 5V DC power (not included). We also have an A96010-kit which in addition to the A96010 also includes a speaker and two cable connectors to connect the unit to a power supply (not included) and the speaker. The record/play time is determined by the 52K resistor. If you change it to 89K you will get 30 seconds but at a reduced sampling rate. Operating current 25mA. Standby current 10 uA. Size: 34 x 23 x 11 mm. The module comes supplied as you see it in the photo.

OPTIONAL ITEMS (Not included):
2 x (BB089) connector cable to connect the voice recorder to a speaker and power source.
1 x (PB244) Speaker
1 x Battery holder that can hold either 4 x AAA or 4 x AA or 4 x C or 4 x D cells. See our battery holders.

(A96010 & A93010)

Quantity	Price
1 – 9	$6.60
10 – 99	$5.95
100 – 999	$4.95
1000 +	$3.95

Skill Level of Item:		(Assembled and Tested)
Product #		A96010
Quantity Available:		164