20 pin ZIF Socket

Shopping Cart

	Your Cart is Empty
	View Cart

20 pin ZIF Socket

(20PIN_ZIF)

(BB082)

Quantity	Price
1 – 9	$11.17
10 – 99	$10.58
100 +	$9.70

Skill Level of Item:		(Component or Part)
Product #		BB082
Quantity Available:		15

Tell a Friend

Related items are:

40 pin Univ ZIF Socket wide slot

Solder directly to PCB or plug directly into IC socket.
Screw mounting holes for more reliable operation.
(BB007)

Quantity	Price
1 – 9	$12.95
10 – 99	$11.95
100 +	$10.95

Skill Level of Item:		(Component or Part)
Product #		BB007
Quantity Available:		15

You might also consider these items:

Atmel 89xxxx Programmer kit

To program:
89C1051, 89C2051 and 89C4051
89C51, 89LV51, 89C52, 89LV52, 89C55, 89LV55, 89S8252, 89LS8252
89S53, 89LS53. 87F51, 87F52 (otp) Uses serial port so can use any terminal emulation software on any computer. Windows 95 & 98 use Hyperterminal which comes with W95/W98.
2 x ZIF sockets not included (20 pin and 40 pin) 16VDC input (at least 150mA)
PCB size: 118mm x 70mm (4.7" x 2.8")
Full documentation acrobat 4 format
Two DOS utilities are available for downloading to examine and reorder fragmented hex files which some compilers produce. (Fragmented hex files can choke any serial programming software not expecting it.) hexmap.exe and reorder.exe
You may use the following no frills terminal program that is easier than Hyperterminal. DOS based but will run under W9x. How to use term.exe
(CPS123)

Quantity	Price
1 – 9	$29.07
10 – 99	$27.00
100 +	$26.10

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS123
Quantity Available:		3

USB PIC Programmer (Assembled) (Zif socket included)

This programmer connects to a USB port. On board 'B' USB connector. Free software. A wide-slot 40 pin ZIF socket is included with this assembled version. Power supply: at least 16VDC (18VDC preferred) center positive required (power supply jack 5.5mm OD 2.5mm ID) at least 200mA. See this page for which devices can be programmed. (CPA150)

Quantity	Price
1 – 9	$77.52
10 – 99	$72.00
100 +	$69.60

Skill Level of Item:		(Assembled and Tested)
Product #		CPA150
Quantity Available:		13

IR Door Minder

This kit uses an infrared (IR) beam to monitor door & passage-ways or any other area. When the beam is broken a relay is tripped which can be used to sound a bell or alarm. Suitable for detecting customers entering a shop, cars coming up a driveway, etc. The IR beam is very strong. Distances over 25 yards can be monitored with this kit. A 12VDC unregulated supply is required to power the kit. A 12V wall adaptor is fine. Only one power supply needs to be used to power both units. The relays in this kit are rated to switch mains voltages. With power applied the relay is normally operated and only releases when the beam is broken. The relay contacts labelled “NO” (Normally Open) and “NC” (Normally Closed) refer to when the relay is released. The plastic tube is to put over the IR LED to direct its beam. This is needed when the barrier is only a few yards apart. IR transmitter PCB size:: 45mm x 30mm (1.77" x 1.18")
IR receiver PCB size:: 50mm x 48mm (1.97" x 1.89") (CPS130)

Quantity	Price
1 – 9	$21.09
10 – 99	$19.98
100 +	$18.32

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS130
Quantity Available:		11

AT24C128 Serial EEPROM 16K

(BB078)

Quantity	Price
1 – 9	$3.95
10 – 99	$3.45
100 +	$3.15

Skill Level of Item:		(Component or Part)
Product #		BB078
Quantity Available:		19

3 Digit LED Counter (incl box)

Two or more counter modules may be plugged together with the 6-pin sockets and harness provided. Uses a single-unit 3-digit LED display and is built around the 14553 & 14511 chips. Box is provided. The separate COUNTER MODULE shows how to use the kit as a counter. Has COUNT & RESET switches with debounce circuit built in to eliminate problems from noisy switches. May cut off and relocate display. The kit includes data sheets and instructions. 9V battery operation. PCB1 size 1.94"x3.13" (49x78mm). PC2 size 1.31"x 1.38" (33x35mm) (CPS1)

Quantity	Price
1 – 9	$19.86
10 – 99	$18.45
100 +	$17.84

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS1
Quantity Available:		6

Two LED Flasher

Two LED Flasher (CPS138)

Quantity	Price
1 – 9	$7.98
10 – 99	$7.56
100 +	$6.93

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS138
Quantity Available:		8

6 - 10W Stereo Ampl Mod using TDA2005

Kit 143 is a class AB stereo audio power
amplifier designed for quality hi-fi
applications using a TDA2005 module. It is
easy to construct and has a minimum of
external components. The module has output
current protection and thermal protection. This
is the data book circuit which produces an
excellent sound. The supply voltage required
for this kit is 8 - 18V DC at 1 to 2 Amps.

PCB size 3"x1 3/4"(CPS143)

Quantity	Price
1 – 9	$15.96
10 – 99	$15.12
100 +	$13.86

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS143
Quantity Available:		6

Temperature Data Logger kit

This is an 8-pin microcontroller based circuit for temperature data logging via the serial port of any computer from between 1 and 4 remote digital
temperature sensors, DS18S20 or DS18S20 made by Dallas.

Features.
• provides realtime data via the serial port
• interfaces up to 4 x DS18S20 sensors
• accuracy to 0.5 degrees centigrade
• fahrenheit scale selected by a jumper
• no external power required
• data stream easily logged & processed
• over 200m distance for each sensor
PCB size: 1 1/2"x1 1/2" (CPS145)

Quantity	Price
1 – 9	$27.62
10 – 99	$25.65
100 +	$24.80

Skill Level of Item:		(Kit - Basic Soldering Required)
Product #		CPS145
Quantity Available:		1