Your Cart is Empty
View Cart
 
 
 
 
monochrome camera modules
 
monochrome camera modules
..........................
 
Color camera modules
 
Color camera modules
..........................
 
Other TV and Video products
 
Other TV and Video products
TV, Video and Camera
L36IR Lens & Holder with Screws for C329 Cameras
Click here for datasheet download.
Description: This is a great lens and holder for the C329 - series cameras. It has a built-in IR-Cut Filter. See our L36IR for lens specs (it's the same lens, but with a holder and screws for the C329 - series cameras).
Read More
  Partially Assembled  
  L36IRKC329  
  30  
Quantity:  

Color LCD Shield
tn_09363-01b.jpg
Description: The Color LCD Shield, recommended by and designed in partnership with an SFE customer, provides an easy method of connecting the popular Nokia 6100 LCD to your Arduino USB or Pro. The board comes as shown with the 128x128 mini color LCD, as well as a backlight driver circuit (boosts to 7V), and three momentary push-buttons (tied through a jumper to pins D3-5).

The Nokia 6100 LCD is controlled through a 9-bit SPI interface. The control pins of the LCD are connected to the hardware SPI pins of the Arduino (D13 -SCK, D11 - DIO), the CS pin is tied to D9 and the reset pin is connected to D8. Voltage from the '5V' pin of the Arduino is boosted to 7V to power the LCD backlight.

The Nokia 6100 LCD is included with the Color LCD Shield. Headers are not soldered on, we recommend the 6 and 8-pin stackable headers.
Read More
  Assembled and Tested  
  LCD09363  
  3  
Quantity:  

Graphic LCD 84x48 - Nokia 5110
Click here for specs, downloads, and more pictures.
Description: The Nokia 5110 is a basic graphic LCD screen for lots of applications. It was originally intended for as a cell phone screen. This one is mounted on an easy to solder PCB.

It uses the PCD8544 controller. The PCD8544 is a low power CMOS LCD controller/driver, designed to drive a graphic display of 48 rows and 84 columns. All necessary functions for the display are provided in a single chip, including on-chip generation of LCD supply and bias voltages, resulting in a minimum of external components and low power consumption. The PCD8544 interfaces to microcontrollers through a serial bus interface.

Note: This uses the same driver as the Nokia 3310 LCD.

Dimensions: 45x45mm
Read More
  Assembled and Tested  
  LCD10168  
  1  
Quantity:  

Serial Enabled 16x2 LCD - Black on Green 5V
Click here for specs, downloads, and more pictures.
Description: This is the latest evolution of our serial LCD. Included on a single board is a 16x2 LCD and an embedded circuit based around a PIC 16F88. The on-board PIC takes a TTL serial input and prints the characters it receives onto the LCD. The installed firmware also allows for a number of special commands so you can clear the screen, adjust the backlight brightness, turn the display on/off, and more.

Communication with SerLCD requires 5V TTL serial at a default baud rate of 9600bps (8-N-1). You can adjust the baud to any standard rate between 2400 and 38400bps. The power (VDD), ground (GND) and RX pins are all broken out to both a 0.1" pitch header as well as a 3-pin JST connector.

SerLCD has the ability to dim the backlight to conserve power if needed. There is also a potentiometer on the back of the display to adjust the contrast.

This LCD makes for a great gift, because it can be used for so many different projects!

Features:
  • Embedded PIC 16F88 utilizes onboard UART for greater communication accuracy
  • Adjustable baud rates of 2400, 4800, 9600 (default), 14400, 19200 and 38400
  • Operational Backspace
  • Greater processing speed at 10MHz
  • Incoming buffer stores up to 80 characters
  • Backlight transistor can handle up to 1A
  • Pulse width modulation of backlight allows direct control of backlight brightness and current consumption
  • All surface mount design allows a backpack that is half the size of the original
  • Faster boot-up time
  • Boot-up display can be turned on/off via firmware
  • User definable splash screen
Dimensions:
  • PCB: 103x36mm
  • LCD: 71.4x26.4mm
Read More
  Assembled and Tested  
  LCD09393  
  3  
Quantity:  

Serial LCD Controller
tn_K192_2.jpg
Description: We at Electronics123 are pleased to offer DIY Electronic's latest new Kit, the Serial LCD Controller - Kit 192. This serial display module provides easy operation of a standard character LCD display. The simple command structure allows text and bar graphs to be displayed on the LCD. Provision is made for up to 8 user-defined characters. The module also includes four digital outputs. The LCD backlight and contrast may be adjusted under program control to compensate for differing lighting conditions and viewing angles.


The module supports 2 interfaces: 
  • Serial RS232 interface
  • Serial TTL interface

Features:
  • Communicates over serial interface with software controlled speed
  • 32 Byte buffer for messages received via communication interface
  • Up to 8 custom characters can be defined
  • Built in commands for drawing bar graphs
  • LCD Backlighting controlled via software, has 254 brightness levels
  • LCD Contrast controlled via software, has 254 contrast levels
  • 4 digital outputs
  • Save the basic settings in module internal EEPROM
NOTE: The supplied LCD does not have backlighting. User must supply a backlit LCD if this feature is required.
Read More
  Kit - Basic Soldering Required  
  CPS192  
  5  
Quantity:  

f6.0mm F1.6 Lens and Holder with Screws - as found on C328/C329 Camera (BW) (No IR Cut Filter)
tn_c328lenses.jpg
PLEASE NOTE: This is the lens and holder with screws. 

Specifications:
  • Lens specs: f= 6.0mm F/No 1.6  
  • FOV = 36 deg diagonal 
  • IR cut filter : None
Read More
  Partially Assembled  
  BB224  
  24  
Quantity:  

f6.0mm F1.6 Lens & Holder + screws - as found on C328/C329 camera (with IR cut filter)
tn_c328lenses.jpg
PLEASE NOTE: this is the Lens & Holder + screws
Lens specs:
F/No 1.6 f= 6.0mm
FOV = 43deg diagonal
IR cut filter : YES
Read More
  Partially Assembled  
  BB270  
  16  
Quantity:  

Lens 3.6mm F2.0 Lens & Holder + screws - (BW) (No IR cut filter) as found on the C328R/C329 camera
tn_c328lenses.jpg
PLEASE NOTE: this is the Lens & Holder + screws
Lens specs:
F/No 2.0 f= 3.6mm
FOV = 50 deg diagonal
IR cut filter : None
Total height (mm): 22mm
Diameter of lens cap D (mm): 14mm
(BB232)
Read More
  Partially Assembled  
  BB232  
  13  
Quantity:  

Lens 3.6mm F2.0 Lens & Holder + Screws - (IR) (WITH IR cut filter) as found on the C329 & C328R cam
tn_c328lenses.jpg
PLEASE NOTE: this is the Lens & Holder + screws
Lens specs:
F/No 2.0 f= 3.6mm
FOV = 50 deg diagonal
IR cut filter : None
Total height (mm): 22mm
Diameter of lens cap D (mm): 14mm
(BB291)
Read More
  Partially Assembled  
  BB291  
  23  
Quantity:  

f2.5mm F2.0 Lens & Holder and Screws - (BW) (NO IR Cut Filter) as found on the C329 & C328R Camera
tn_c328lenses.jpg
PLEASE NOTE: This is the lens and holder & screws

Lens Specs:
  • F/No 2.0 f= 2.5mm
  • FOV = 100 deg diagonal
  • IR cut filter : None
  • Total height (mm): 24mm
  • Diameter of lens cap D (mm): 15mm
Read More
  Partially Assembled  
  BB289  
  15  
Quantity:  

C302BW Camera Module
Click here for specs, downloads, and more pictures.
Description:
The C302BW is a miniature, high-quality image producing black & white analog video camera module. The video signal can be transmitted by wire or wirelessly (using 2.4G/5.8G module) to a display terminal. The module can be made to fit into a tubular portable application or form-factor. This unit is widely used in internal engine detection or in pipelines.

Features:
  • Small size, Portable
  • High frame rate black & white camera, high quality picture
  • Pinhole camera can easily enter a cavity or very small spaces for observation
  • Standard CVBS signal output can be directly displayed on a monitor
  • Interface: Power Supply 5V, Ground, Video
Read More
  Assembled and Tested  
  C302BW  
  14  
Quantity:  

C305 Color Camera Module
Click here for specs, downloads, and more pictures.
Closeout item. Limited quantity available. Price Reduced.

NOTE: C305 Camera no longer comes with cable.  

Description:

The C305M turns a video camera into a component of your complete product. The C305 is a CMOS type video camera, specially designed for cost sensitive consumer electronics applications. It offers benefits such as low power consumption, low cost, and small size together with consistent hi-quality color images.

Features:
  • Small in size 21x21mm - great for embedded installation
  • High frame rate image acquisition and convenient for observing moving subjects
  • Standard CVBS signal output, connects directly to the monitor display
Read More
  Assembled and Tested  
  C305  
  3  
Quantity:  

C306-36A Camera Module
tn_c306-36a.png
Description:
The C306-36A is a camera module for various embedded image acquisition systems, such as: remote monitoring, vehicle monitoring, doorbell cams, camera phones, digital image recording, industry control, access control, etc. It is especially suited for low speed remote control image transmission system, such as phone lines, GPRS based on CDMA, & digital radio.

Features:
  • Small in size: 28mmX20mm (LxW)
  • 0.3M. CMOS sensor, VGA resolution, down sample to QVGA.
  • Video-out: VGA & 60fps.
  • Low power consumption, 3.3V operation.
  • UART interface support up to 115.2Kbps.
  • Built-in JPEG CODE.
  • Built-in lens, FOV 135°
Read More
  Assembled and Tested  
  C306-36A  
  1  
Quantity:  

C407 Camera Module
Click here for specs, downloads, and more pictures.
Description: The C407 is a camera module for various embedded image acquisition systems, such as: remote monitoring, vehicle monitoring, doorbell cams, camera phones, digital image recording, industry control, access control, etc. It is especially suited for low speed remote control image transmission system, such as phone lines, GPRS based on CDMA, & digital radio.

Features:
  • Small in size: 28mmX20mm (LxW)
  • 0.3M. CMOS sensor, VGA resolution, down sample to QVGA
  • Low power consumption, 3.3V operation
  • UART interface support up to 115.2Kbps
  • Built-in JPEG CODE
  • Built-in lens, FOV 60°
Read More
  Assembled and Tested  
  C407  
  5  
Quantity:  

Wifi Module for General Purpose Application
Click here for specs, downloads, and more pictures.
Specifications:
  • Router free, no need network, no 3G
  • Small in size 30x50mm, with on board antenna
  • 3.7V-5V operation
  • USB2.0 compatible
  • Working distance >10M
  • Multi devices can be log in at the same time
  • work with UVC USB camera of MJPG
  • Video format VGA 30fps, HD720p 15fps
  • Video latency : <0.5sec
  • Video view in iOS/Andriod device
Read More
  Assembled and Tested  
  WFM01  
  2  
Quantity:  

pcDuino Starter Kit - pcDuino + A/V Kit
Click here for specs, downloads, and more pictures.
Description: As the field of embedded electronics gets more advanced, hobbyists and professionals are both in need of smaller and more powerful computers. We've been looking for awhile and now we've found one that we really like, not only because it's small and fast but because it's also Arduino shield compatible! The pcDuino is a high performance, cost effective mini PC platform that runs full-featured operating systems such as Ubuntu and Android ICS.

It's easy to hook up, just connect 5V power and a keyboard and mouse. The pcDuino outputs video to any HDMI enabled TV or monitor via the built in HDMI interface. It was specifically designed to make it easy for the open source community to develop computationally demanding projects using the vast, existing catalog of Arduino Shields.

An API has been developed for the pcDuino that allows the user to access all of the functions that you would expect using simple Arduino-style language.

Note: The pcDuino has trouble connecting to certain DVI monitors. There is a fix available on the pcDuino wiki page. Check the documents below!

Dimensions: 125mm X 52mm

The pcDuino is supplied with our A/V Kit which is designed to get your pcDuino up and running straight out of the box. This kit offers you everything to get you started.
Read More
  Assembled and Tested  
  BB341  
  4  
Quantity:  

f1.68mm F2.9 Lens and Lens Holder - BB345 Lens and BB288 Lens Holder
Click here for specs, downloads, and more pictures.
This is a kit which includes the following items:
1 x BB345 1.6mm Lens
1 x BB288 Lens Holder


Features:
  • For Sensor Size: 1/4" (max image circle 4.80mm dia)
  • Focal Lenght (EFL) : f=1.68mm
  • F/NO (infinite) : F/NO 2.9
  • Back Focal Lenght: BFL=4.3mm
  • Flange Back Lenght: FB=3.36mm
  • Field of View (FOV) : 
    • Diagonal = 170 deg @ 4.5mm
    • Horizontal = 128 deg @ 3.6mm
    • Vertical = 94deg @2.7mm
  • IR cut filter : None 
  • Total height (mm): 15mm 
  • Diameter 14mm
  • TV Distortion: <30%
  • Thread size: M12xP0.5
Read More
  Partially Assembled  
  BB345-HL  
  300  
Quantity: