Your Cart is Empty
View Cart
 
 
Light effects
SMD HAPPY FACE
tn_mk141.jpg
Features

miniature size gadget
2 LEDs flash alternately
can be operated pending (cord supplied)
great as attention grabber
ideal introduction into SMD (Surface Mounted Device) technology
some extra parts are supplied, in case some get lost or damaged

Specifications

power supply: 3V Li button cell (e.g. CR2025 or CR2032)
power consumption: 5mA approx.
dimensions: Ø1.1" x 0.3" (MK141)
Read More
  Kit - Basic Soldering Required  
  MK141  
  2  
Quantity:  

HALLOWEEN PUMPKIN
tn_mk145.jpg
Features

25-LED bright-colored pumpkin-shape Halloween gadget
random flash effect simulates flickering candle
1 extra high intensity yellow LED illuminates the pumpkin
on/off switch


Specifications

power supply: 9V battery (not incl.) / 20mA
dimensions: 4.0" x 3.2" x 1.3"
(MK145)
Read More
  Kit - Basic Soldering Required  
  MK145  
  8  
Quantity:  

sweet little heart kit
tn_cps1104.jpg
A unique light effect with a heartlike shape. The heart is made up of 20 LED’s that are turned on and off periodically. This kit may be used to decorate a corner of your room or living room, the windscreen of a car, a store or even be donated as a sample of some special feeling.
Supply voltage: 9V
Current consumption: 100mA
(CPS1104)
Read More
  Kit - Basic Soldering Required  
  CPS1104  
  1  
Quantity:  

Audio to Light Modulator Kit
tn_cps12_kit.png
Description: A music-to-light modulator is a circuit which controls the intensity of one or more lights in response to an audio input. The kit is ideal to give the lights rhythm to any party or disco without much money. Very safe operation as it uses an opto-coupler as a coupling device between the audio and the mains controlling stages of the circuit.

Specifications:
  • Input trigger voltage: 2.3 - 2.5V (min)
  • Operating voltage: 110 or 250 VAC
  • Power handling: 220W @ 110V or 500W @ 250V
  • PCB size: 2.16" x 1.63" (To help in the decision to select an enclosure keep in mind that the heat sink used in the kit is about 1" tall.)

PLEASE NOTE: THIS KIT USES 120V MAINS ELECTRICITY AND SHOULD NOT BE ATTEMPTED BY ANYONE WITHOUT THE PROPER SKILL LEVEL. THIS SHOULD ALSO BE BUILT IN A SUITABLE PLASTIC ENCLOSURE.
Read More
  Kit - Basic Soldering Required  
  CPS12  
  26  
Quantity:  

Two LED Flasher
tn_cps138.jpg
Two LED Flasher (CPS138)
Read More
  Kit - Basic Soldering Required  
  CPS138  
  11  
Quantity:  

Disco / Warning Strobe Light 120VAC
tn_cps14.jpg
The best of all light effects, previously available only as professional equipment for discos, now available to amateur constructors at a very reasonable price. A xenon flash tube exactly like those found on aircraft, signal beacons and discos is included. The flash tube is rated for 2 000 000 flashes. Warning: This kit uses 120V mains power and should only be attempted by persons with the necessary experience!

Supply voltage: 120 VAC

Strobe frequency: 0.3 -3Hz (CPS14)
Read More
  Kit - Basic Soldering Required  
  CPS14  
  1  
Quantity:  

6V DC Xenon Tube Flasher
tn_cps162_kit.png
A 6V battery powered xenon tube flasher. Prewound transformer is supplied with the kit. Full instructions provided. Vary the flash rate and brightness by changing component values. (CPS162)
Read More
  Kit - Basic Soldering Required  
  CPS162  
  2  
Quantity:  

12V DC strobe Xenon Flasher (Kit)
tn_cps163.jpg
This Kit builds the circuit to trigger a high voltage xenon flashtube using a 12V DC input from a power supply. The flash rate can be varied between 1 and 2 flashes per second using an onboard potentiometer. Component changes can move the flash rate range faster or slower. The Kit is constructed on a single -sided printed circuit board (PCB). Protel Autotrax and Schematic were used to design the board. PCB size: 3 1/2"x1 3/4" (CPS163)
Read More
  Kit - Basic Soldering Required  
  CPS163  
  3  
Quantity:  

LED Dice with Slowdown kit (inc box)
tn_cps3.jpg
A kit to introduce you to electronics and circuit analysis. Seven LEDs are arranged like a real dice face. Push the switch and the dice rolls then slows down. Ingenious circuit design used to minimize components. Uses the 4017 and 555. The box is included with the kit.(CPS3)
Read More
  Kit - Basic Soldering Required  
  CPS3  
  3  
Quantity:  

5 Bright LEDs flash in 7 patterns
tn_cps37m.jpg
Five Ultra Bright LEDs flash in seven patterns. The modes can be cycled through using an on-board tact switch. When the desired flashing pattern is found move the PCB-mounted SPDT switch. The pattern will remain flashing as long as power goes to the board & the switch remains set. COB PCB size: 3x1.5 cm. Ideal for schools.(CPS37M)
Read More
  Kit - Basic Soldering Required  
  CPS37M  
  9  
Quantity:  

Stairway To Heaven Game Kit (inc box)
tn_cps5.jpg
A game of skill to turn on the Stairway of 6 LEDs as the bi- colour LED flashes. Introduces you to several basic electronic circuits with a surprisingly difficult game to play. Box included. Good introduction to electronics. 9V battery.(CPS5)
Read More
  Kit - Basic Soldering Required  
  CPS5  
  9  
Quantity:  

5 Ultra Bright LEDs random COB Module
tn_cps52m.jpg
Five Ultra Bright LEDs flashing in random or in sequence. Uses a COB (Chip-on-board) PCB measuring 3cm x 1.5 cm. The flashing frequency is set by a single external resistor between 300K and 1M ohm. A pad connected high determines the random or sequential flash pattern. A second pad connected low determines whether the flashing is continuous or set by a toggle switch. Ideal for schools. 2.0V DC to 3.6V DC operation. Operating current 10 - 16mA. Standby current is less than 1uA. (CPS52M)
Read More
  Kit - Basic Soldering Required  
  CPS52M  
  11  
Quantity:  

Roulette LED
tn_cps6.jpg
Ten LEDs arranged in a circle. Pressing the switch turns one LED on in turn to simulate a roulette ball spinning in the wheel. A slowdown circuit gradually brings the ball to a stop. The circuit uses the versatile 4017 IC and a voltage controlled oscillator circuit.
Power supply: 9VDC (CPS6)
Read More
  Kit - Basic Soldering Required  
  CPS6  
  3  
Quantity:  

Single LED Dice using PIC16C54 kit
tn_cps69.jpg
One of the most popular electronic kits ever is the LED dice. Now we have used the popular small micro-controller, the PIC16C54 to 'roll the dice'. All software code is provided in the documentation with complete comments so you can learn how to program these devices yourself.
Read More
  Kit - Basic Soldering Required  
  CPS69  
  6  
Quantity:  

10-CHANNEL 12VDC LIGHT EFFECT GENERATOR (Assembled & Tested)
tn_vm120.jpg
Features:
  • 10 x 12V/400mA outputs to control cold-cathode fluorescent lamps (using FLPS adapter), light bulbs, LEDs and "solid state" relays, ...
  • for use with advertisement lighting, party lights, eye-catchers, in the disco...
  • ten pre-programmed light patterns selectable with a push button
  • the number of used channels is adjustable
  • the last used lighting effect is saved in non-volatile memory
  • adjustable speed
  • LED indication for every output
  • 12V operation possible for use in cars
  • options:
  • adapter: PSS1255 (12V output 5.5A)
  • power supply for cold-cathode fluorescent lamps: FLPS (300mm) or FLPS1 (100mm)
  • cold-cathode fluorescent lamps: FL(xx) - (100 or 300mm)
  • solid-state relays: VR25SS1A or VR3SS1A to drive mains voltage lamps
  • also available in kit version: K8044
Read More
  Assembled and Tested  
  VM120  
  2  
Quantity:  

4 CHANNEL RUNNING LIGHT
Click here for specs, downloads, and more pictures.
The running light module is the perfect addition to your existing system if you are looking to create the kind of effects used in a disco. The speed of this module can be adjusted manually. All the outputs are equipped with LED indication. 

Specifications:
 
suppressed according to EN55015
adjustable speed for the switching of the charge
led indication
AC power: 110 to 240VAC
max. load per channel: 450W (240VAC) / 230W (115VAC)
speed adjustable between: 0.2 and 3Hz
dimensions: 3.9" x 3.2" x 1.4"

PLEASE NOTE, THIS KIT USES 120V MAINS ELECTRICITY AND SHOULD NOT BE ATTEMPTED BY ANYONE WITHOUT THE PROPER SKILL LEVEL. THIS SHOULD ALSO BE BUILT IN A SUITABLE PLASTIC ENCLOSURE.
Read More
  Kit - Basic Soldering Required  
  K8032  
  4  
Quantity:  

FLASHING LED SWEETHEART
Click here for specs, downloads, and more pictures.
Show your love in an original way that your heart still beats faster for him or her. 28 LEDs form 2 blinking hearts.

Specifications:
 
consumption: ± 8mA
power supply: 9V battery (not incl.)
dimensions: 2.4" x 2.4" x 1.2"  (MK101)
Read More
  Kit - Basic Soldering Required  
  MK101  
  13  
Quantity:  

ROULETTE
tn_mk119.jpg
37 LEDs. Spinning sound. 'Winner'-tune for each color. Spins LEDs between games. Pushbutton operation. Microprocessor technology.

Specifications
auto power-off
low power consumption
power supply: 3 AA battery operation (not incl.)
dimensions: Ø3.6" x 1.3" (MK119)
Read More
  Kit - Basic Soldering Required  
  MK119  
  5  
Quantity:  

ROLLING CLOCK
tn_mk123.jpg
Nicely animated rolling time and date display. Graphic display with 35 LEDs. Select hours, minutes, month or day with SELECT and enter the values with SET. Time display in 12h-mode (24h-mode when setting clock). Fine-tune the clock by turning CV1. 

Specifications:
 
power supply: 9-12V DC adapter or car battery
current consumption: 20mA max.
backup battery: 9V block type 6LR61 / 6F22
dimensions: 1.8"/3.5" x 2.6"  (MK123)
Read More
  Kit - Basic Soldering Required  
  MK123  
  4  
Quantity:  

ADVERTISEMENT LED DISPLAY WITH RED LEDS
Click here for specs, downloads, and more pictures.
NEW - LOWER PRICE!
Price was: $69.48

Create your own message for personal advertisements. Can be used for home, shop, car or truck... 12 self definable characters, which are made by de customer. 150 bright LEDs supplied with the kit. Many spectacular light effects on the message, (scrolling, blinking, rolling, panning...). Adjustable effect speed. Vertical or horizontal position possible. Fixed displaying is possible (no effects). Different displays can be synchronized, to create longer messages, or to create giant advertisements. Special housing available : B5600.
Extra LEDs available : K/LEDHR (red) and K/LEDHG (green).
(K5600R)
Read More
  Kit - Complex Soldering Required  
  K5600R  
  1  
Quantity:  

ANIMATED GHOST
tn_mk166.jpg
Features:

great Halloween gadget
greets your visitors
for shops, parties, events or just for fun
 

Specifications:

ghost responds to sudden noises
adjustable sensitivity
battery operation: 2xAAA battery
dimensions: 137x68x50mm 
(MK166)
Read More
  Assembled and Tested  
  MK166  
  4  
Quantity:  

STROBOSCOPE
Click here for specs, downloads, and more pictures.
Flashing light effects for discos. Make your own snapshots and "lightning" light effects. Flash frequency adjustable from 2 to 20Hz.

Specifications:
power supply: 110V - 120V AC
PCB dimensions: 3.4" x 2.6"
(K5300)
Read More
  Kit - Basic Soldering Required  
  K5300  
  2  
Quantity:  

USB Controlled DMX Interface (Kit)
tn_k8062.jpg
NEW - LOWER PRICE!
Price was: $69.04

Features:

  • This unit can control DMX fixtures using a PC and USB interface
    • Test software and "DMX Light Player" software is included, a DLL is provided to write your own software
    • Furthermore there is a stand-alone test function that outputs all 512 channels at a time, with adjustable levels
    • Kit includes:
      • Nice enclosure
      • USB cable
      • CD with: test software, DLL for own developments, free DMX light player
    • Also available in an assembled version: VM116

    Specifications:

    • Connected and powered through USB
    • 512 DMX channels with 256 levels each
    • 3 pin XLR-DMX output connector
    • Windows 98SE or higher compatible
    • DLL included to write your own software
    • Optional 9V battery needed for stand alone test mode
    • Solid state - fuse protection on DMX output
    • Dimensions: 4.2 x 4.0 x 1.8"

    Read More
      Kit - Basic Soldering Required  
      K8062  
      2  
    Quantity:  

    TRAFFIC LIGHT
    tn_mk131.jpg
     (Out of Stock)Miniature traffic light as used on four-way junctions. Realistic operation with adjustable delay. 12 LEDs. Great for model railroads, exhibitions, as a toy, ...

    Specifications

    low power consumption: 15mA
    power supply: 9V battery (not incl.)
    ON/OFF switch
    dimensions: 2.0" x 1.4" x 4.5"
    (MK131)
    Read More
      Kit - Basic Soldering Required  
      MK131  
      0  
    Quantity:  

    Magic Message
    Click here for detailed specs.
    NEW - LOWER PRICE!
    Price was: $17.37

    Features:
    • Amaze your friends: wave the wand to make the message appear
    • The message seems to be floating in the air...
    • Lots of built-in messages + enter your own 7-character message
    • Applications: novelty gadget, in emergencies, at concerts or TV-shows, to welcome people, etc…
    • Excellent visibility due to high intensity red LEDs
    • Low power consumption
    • Auto power-off
    Specifications:
    • Power supply: 2 x AAA batteries (not incl.)
    • Dimensions: 6.4" x 1.0" x 0.9"
    Read More
      Kit - Basic Soldering Required  
      MK155  
      8  
    Quantity:  

    ELECTRONIC CANDLE
    Click here for detailed specs.
    NEW - LOWER PRICE!
    Price was: $9.75

    Features

    cannot be blown out by the wind
    safe for kids and pets
    great at home, for parties, Xmas, Halloween, etc.
    choose between 3 different modes:
    realistically flickering flame
    steady flame
    fade in - fade out
    fits standard 38mm cup
    safe: no flame or heat
    5h turn-off timer saves batteries
    yellow high-intensity LED
    (MK167)
    Read More
      Kit - Basic Soldering Required  
      MK167  
      5  
    Quantity:  

    Sound-to-Light Unit
    Click here for specs, downloads, and more pictures.
    Description: Four high-intensity LEDs light up and react simultaneously on every sound. For different funny and practical applications, such as: sound indicator, simple sound-to-light unit for music, for the hearing impaired : can be used to indicate the telephone, door bell. Adjustable sensitivity with potentiometer. Built-in microphone.

    Specifications:
    • Consumption: 0.5mA min. / 12mA max.
    • Power supply: 9V battery (not incl.) dimensions: 1.6" x 2.2" x 1.4"
    Read More
      Kit - Basic Soldering Required  
      MK103  
      10  
    Quantity:  

    POCKET VU METER
    tn_mk115.jpg
    Surprise your friends in the disco. 5 red LEDs. Incorporated microphone. Adjustable sensitivity.

    power supply: 3V type CR2032 battery (not incl.)
    (MK115)
    Read More
      Kit - Basic Soldering Required  
      MK115  
      3  
    Quantity:  

    LASER POINTER
    tn_mp1000.jpg
    1mW Class II. 650nm. Housing in ABS.

    Specifications:

    power supply: 2 x AAA-battery (incl.)
    dimensions: 138 x 18mm
    weight: 24g
    (MP1000)
    Read More
      Assembled and Tested  
      MP1000  
      5  
    Quantity:  

    FLASHING YELLOW LED STAR
    tn_mk169y.jpg
    Features

    great seasonal gadget !
    safe battery operation
    select: flashing or static operation
    application: desktop or hanging from the ceiling
    several units enhance the effect
    in-car (12V) operation possible
    (MK169Y)
    Read More
      Kit - Basic Soldering Required  
      MK169Y  
      4  
    Quantity:  

    FLASHING RED LED STAR
    tn_mk169r.jpg
    Features

    great seasonal gadget !
    safe battery operation
    select: flashing or static operation
    application: desktop or hanging from the ceiling
    several units enhance the effect
    in-car (12V) operation possible
    (MK169R)
    Read More
      Kit - Basic Soldering Required  
      MK169R  
      1  
    Quantity:  

    60-LED MULTI-EFFECT STAR
    tn_mk170.jpg
    Features:

    processor-controlled LED star creating multiple dazzling effects
    extra LEDs included, allowing different colour combinations: make your own mix of red and yellow LED's or make the star fully red or yellow
    on-board effect selection push button
    24 effects
    3 static
    15 blinking
    6 animations with fading
    "All effects" sequencing is possible (standard setting)
     

    Specifications:

    60 LEDs on board
    power supply: 9 to 12Vdc adapter or battery (not incl.)
    current consumption: 20mA (static mode 9V battery)
    dimensions: 105x110x35mm
    (MK170)
    Read More
      Kit - Basic Soldering Required  
      MK170  
      7  
    Quantity:  

    3-CHANNEL SOUND LIGHT WITH MICROPHONE
    Click here for specs, downloads, and more pictures.
    Low, mid and high channels. Sensitivity adjustment per channel. LED indication per channel. Attractive transparent enclosure. Microphone included. Noise suppressed according to EN55015.

    Specifications:

    operating voltages: 110-125 or 220-240V AC (50/60Hz)
    max. load: 200W per channel (100W @ 110-125V AC)
    only suited for incandescent light bulbs
    dimensions: 6.1" x 1.8" x 6.3"
    (K8017)
    Read More
      Kit - Basic Soldering Required  
      K8017  
      2  
    Quantity:  

    CANDLE LED LIGHT
    tn_xmcl1.jpg
    CLOSEOUT ITEM - WHILE STOCK LASTS.

    Features creates the same atmosphere as a real candle comes with frosted glass holder with on/off switch Specifications power supply: 2 x LR03C (not incl.) dimensions: Ø60 x 135mm weight: 335g (XMCL1)
    Read More
      Assembled and Tested  
      XMCL1  
      7  
    Quantity:  

    DIMMER MODULE FOR ELECTRONIC TRANSFORMER
    tn_vm131_1.jpg
    Dimming electronic transformers
    impossible?
    Not if you have this unit !
    A processor controlled circuit outputs a
    wave form that is suited for most dimmable
    electronic transformers.
    Can also be used for direct mains voltage
    lamps.
    (VM131)
    Read More
      Assembled and Tested  
      VM131  
      4  
    Quantity:  

    SIMPLE ONE CHANNEL LIGHT ORGAN
    tn_mk110.jpg
    With loudspeaker input. Modulates a lamp according to the music signal at the input. Optical isolated loudspeaker input. Adjustable sensitivity.

    Specifications
    input sensitivity: 2W to 60W
    maximum load: 120W at 120V AC and 230W at 230V AC
    dimensions: 2.4" x 1.6"
    Read More
      Kit - Basic Soldering Required  
      MK110  
      5  
    Quantity:  

    7.9" LED DISPLAY
    Click here for specs, downloads, and more pictures.
    CLOSEOUT ITEM - WHILE STOCK LASTS.

    This kit contains a 7-segment display consisting of 12 LEDs per segment and 4 LEDs for the decimal point. Using an additional power supply, which does not have to satisfy any strict standards, it may be easily connected to existing circuit . (K2567)
    Read More
      Kit - Basic Soldering Required  
      K2567  
      2  
    Quantity:  

    7.9" LED DISPLAY "COMMON CATHODE"
    Click here for specs, downloads, and more pictures.
    This kit contains a 7-segment display consisting of 12 LEDs per segment and 4 LEDs for the decimal point. Using an additional power supply, which does not have to satisfy any strict standards, it may be easily connected to existing circuit .
    (K2568)
    Read More
      Kit - Basic Soldering Required  
      K2568  
      2  
    Quantity:  

    DUAL ELECTRONIC DICE
    Click here for specs, downloads, and more pictures.
    Board games provide an excellent source of pleasant and healthy entertainment. However, the dice can be a constant source of distraction : they fall off the table, allow cheating, one or more players don't see the results properly and so on. There can be no doubt at all about the result displayed on this electronic dice module, and cheating is out of the question. Two fully independent dice. At your choice you can play with one or two dice. Displays are switched off automatically after 30 seconds to save battery power.
    (K3400)
    Read More
      Kit - Basic Soldering Required  
      K3400  
      2  
    Quantity:  

    ELECTRONIC CHRISTMAS TREE
    Click here for specs, downloads, and more pictures.
    NEW - LOWER PRICE!
    Price was: $6.33

    Christmas was never so congenial ! 16 blinking LEDs.


    Specifications: 
    • very low power consumption: max. 4mA 
    • power supply: 9V battery (not incl.) 
    • dimensions: 2.4" x 4.0" x 1.0"
    Read More
      Kit - Basic Soldering Required  
      MK100  
      25  
    Quantity:  

    Flashing LED's
    Click here for specs, downloads, and more pictures.
     (Out of Stock)Description: For different applications (such as model construction), and recreational. Adjustable flashing speed with two potentiometers.

    Specifications:
    • Consumption: ± 8mA
    • Power supply: 9V battery (not incl.)
    • Dimensions: 1.2" x 1.4" x 0.6"
    Read More
      Kit - Basic Soldering Required  
      MK102  
      0  
    Quantity:  

    LED Running Light
    Click here for specs, downloads, and more pictures.
    8 LEDs. Different LED running effects are selectable (PROG push button). Adjustable effect speed (SPEED potentiometer). Power stand-by push button (OFF push button).


    Specifications
    power supply: 9V battery (not incl.)
    dimensions: 3.5" x 1.6"
    Read More
        
      MK107  
      20  
    Quantity:  

    Electronic Dice
    Click here for specs, downloads, and more pictures.
    Description: Electronic die with LED indication. Rolls slowly out when the push button is released.

    Specifications:
    • Power supply: 9V battery (not incl.)
    • Dimensions: 1.7" x 2.4"

    Hint: If the normally dimmed LEDs are still lighting up, you can still replace ZD1, zener diode of 2V7, by a zener diode ov 3V6 (500mW).

    Read More
      Kit - Basic Soldering Required  
      MK109  
      4  
    Quantity:  

    Low Voltage Light Organ
    tn_mk114.jpg
    Description: Operates at safe voltage level. Makes lamps flash to the rhythm of the music. Usable for halogen bulbs. Optically isolated speaker input. Adjustable sensitivity. Can be used in the car, if the lamps are isolated from the chassis.

    Specifications:
    • Input sensitivity: 2W to 60W
    • Maximum load: 50W / 12V or 100W / 24V
    • Power supply: 12V to 24V DC or AC
    • Dimensions: 1.8" x 3.5"
    Read More
      Kit - Basic Soldering Required  
      MK114  
      2  
    Quantity:  

    RIDING SANTA
    tn_mk116.jpg
    126 LED multicolor animated Xmas gadget. No need to remove battery when using external supply. 12V operation possible for use in cars, trucks. On/off switch included.

    Features:

    also available in mounted version: MMK116

    Specifications:

    power supply: 9 to 12V DC or 9V alkaline battery (not incl.)
    dimensions: 3.2" x 5.7"
    recommended adapter: PS905USA
    (MK116)
    Read More
      Kit - Basic Soldering Required  
      MK116  
      3  
    Quantity:  

    Results 1-45 of 99123