A96020 kit (A96020 with wires and speaker included)

Shopping Cart

	Your Cart is Empty
	View Cart

Click here for Data Sheet

This is a kit which include the following items:
1 x A96020 voice recording module with 2 x 20 second messages
2 x Connector cable to connect the voice recorder to a speaker and power source.
1 x 1watt 3inch 8ohm Speaker
(you will need to connect the connector cables to the speaker and a power supply preferably by soldering)

CLOSEOUT ITEM - WHILE STOCK LASTS.

The A96020 voice recording module offers true single chip solid state storage capability and requires no software or micro-controller support. It provides high quality recording and playback with dual 20 second message. Sampling rate is 3.2K. Size: 34 x 23 x 11 mm. All you need to do is add a 5V DC Power supply (not included).

Features:

Non volatile flash memory technology
No battery back up required
User friendly, easy to operate
Slide switch for record or play back
Separate key to trigger message 1 or 2
Low power consumption
LED to indicate recording and playback
Built-in condenser mic
Automatic power down
5-6V Operation.

Not Included:
1 x Battery holder that can hold either 4 x AAA or 4 x AA or 4 x C or 4 x D cells. See our battery holders.

Quantity	Price
1 – 9	$12.08
10 – 99	$11.45
100 +	$10.49

Skill Level of Item:		Partially Assembled
Product #		A96020-kit
Quantity Available:		82

Tell a Friend

Related items are:

Voice Recording Module 2 x 20sec sections

CLOSEOUT ITEM - WHILE STOCK LASTS.

The A96020 voice recording module offers true single chip solid state storage capability and requires no software or micro-controller support. It provides high quality recording and playback with dual 20 second message. Sampling rate is 3.2K. Size: 34 x 23 x 11 mm. All you need to do is add a speaker (not included) and 5V DC Power (not included).

Features:

Non volatile flash memory technology
No battery back up required
User friendly, easy to operate
Slide switch for record or play back
Separate key to trigger message 1 or 2
Low power consumption
LED to indicate recording and playback
Built-in condenser mic
Automatic power down
5-6V Operation.

OPTIONAL ITEMS (Not included):Features:
2 x (BB089) connector cable to connect the voice recorder to a speaker and power source.
1 x (PB244) Speaker
1 x Battery holder that can hold either 4 x AAA or 4 x AA or 4 x C or 4 x D cells. See our battery holders.

(A96020)

Quantity	Price
1 – 9	$8.89
10 – 99	$8.42
100 – 999	$7.72
1000 +	$4.95

Skill Level of Item:		Assembled and Tested
Product #		A96020
Quantity Available:		118

..........................

20 second voice recorder/playback module (A93010)

PLEASE NOTE: This module, part# A96010, is actually an A93010. It is virtually identical to the A96010 and it operates the same, but downloadable datasheets are available for each for comparison if necessary. The small size is because the IC is in Chip-on-board form. One button is pushed down to record the message through the on-board electret microphone; A LED turns on during this time. The other button just has to be momentarily pressed to replay the message. A second momentary press during playback will stop the playback. Sampling rate is 4K. All you have to add is the speaker (not included) and 5V DC power (not included). We also have an A96010-kit which in addition to the part# A96010 also includes a speaker and two cable connectors to connect the unit to a power supply (not included) and the speaker. The record/play time is determined by the 52K resistor. If you change it to 89K you will get 30 seconds but at a reduced sampling rate. Operating current 25mA. Standby current 10 uA. Size: 34 x 23 x 11 mm. The module comes supplied as you see it in the photo.

OPTIONAL ITEMS (Not included):
2 x (BB089) connector cable to connect the voice recorder to a speaker and power source.
1 x (PB244) Speaker
1 x Battery holder that can hold either 4 x AAA or 4 x AA or 4 x C or 4 x D cells. See our battery holders.

(A96010 & A93010)

Quantity	Price
1 – 9	$6.60
10 – 99	$5.95
100 – 999	$4.95
1000 +	$3.95

Skill Level of Item:		Assembled and Tested
Product #		A96010
Quantity Available:		98

..........................

A96010 kit (A96010 with wires and speaker included)

PLEASE NOTE: This module, part# A96010, is actually an A93010. It is virtually identical to the A96010 and it operates the same, but downloadable datasheets are available for each for comparison if necessary. The small size is because the IC is in Chip-on-board form. One button is pushed down to record the message through the on-board electret microphone; A LED turns on during this time. The other button just has to be momentarily pressed to replay the message. A second momentary press during playback will stop the playback. Sampling rate is 4K. All you have to add is the speaker (not included) and 5V DC power (not included). We also have an A96010-kit which in addition to the part# A96010 also includes a speaker and two cable connectors to connect the unit to a power supply (not included) and the speaker. The record/play time is determined by the 52K resistor. If you change it to 89K you will get 30 seconds but at a reduced sampling rate. Operating current 25mA. Standby current 10 uA. Size: 34 x 23 x 11 mm. The module comes supplied as you see it in the photo.

This is a kit which include the following items:
1 x A96010 voice recording module (20 second message)
2 x Connector cable to connect the voice recorder to a speaker and power source.
1 x 1watt 3inch 8ohm Speaker
(you will need to connect the connector cables to the speaker and a power supply preferably by soldering)

Not included:
1 x Battery holder that can hold either 4 x AAA or 4 x AA or 4 x C or 4 x D cells. See our battery holders.

Quantity	Price
1 – 9	$9.12
10 – 99	$8.64
100 +	$7.92

Skill Level of Item:		Partially Assembled
Product #		A96010-kit
Quantity Available:		82

..........................

Click here for specs, downloads, and more pictures.

20 Second recording module with 9V battery Connector

Fully Assembled and tested. All you need to do is add a 9V Battery.

Record: Press and hold “Record” switch. LED indicator turns on and start recording. Release switch to finish recording, and LED turns off.
Play: Press “Play” switch to play complete message once.

Specifications:

20 second non-volatile recordable IC.
Includes Electret microphone for recording.
40mm Mylar speaker included.
Operating Voltage: 9V (battery not included)
Operating Current: <= 40mA (average)
Standby Current <= 0.2mA
PCB size: 1.8" x 1" (45mm x 25mm)

Quantity	Price
1 – 9	$7.95
10 – 99	$7.55
100 – 999	$6.89
1000 +	$6.59

Skill Level of Item:		Assembled and Tested
Product #		BR9
Quantity Available:		402

..........................

2pin connector cable (8 inch)

Quantity	Price
1 – 9	$0.33
10 – 99	$0.29
100 +	$0.24

Skill Level of Item:		Component or Part
Product #		BB089
Quantity Available:		165

..........................

2" Paper Cone Midrange Tweeter 4 Ohm

Features:

The SAS Bazooka 5" shielded midbass driver features a stamped steel frame, inverted concave diaphragm, foam half roll surround, and flat spider.
It boasts high power handling and smooth response, thanks to an optimized ceramic ferrite magnet and copper 4-layer voice coil on an aluminum former.
The WF5R-MM's 2 ohm rating makes it great for mobile sound applications; also for home use when used in multiples to achieve higher system impedances.
Made in Brazil by Bravox. Buyout, limited quantities.
Read More...

Quantity	Price
1 – 9	$3.85
10 – 99	$3.65
100 +	$3.34

Skill Level of Item:		Component or Part
Product #		PB300
Quantity Available:		26

..........................

BOSS BRS35 3-1/2" Dual Cone Replacement Speaker

Features:

3.5" dual polypropylene cone replacement speaker.
Read More...

Quantity	Price
1 – 9	$6.57
10 – 99	$6.22
100 +	$5.70

Skill Level of Item:		Component or Part
Product #		BRS35
Quantity Available:		1

..........................

5" Indoor/Outdoor Horn

Features:

5" Indoor/Outdoor Horn
This indoor outdoor horn speaker is made of high impact white ABS plastic.
Completely weatherproof outdoor horn speaker, ideal for indoor or outdoor use.
Great for small system paging speaker application.
Read More...

Quantity	Price
1 – 9	$9.27
10 – 99	$8.78
100 +	$8.05

Skill Level of Item:		Component or Part
Product #		M-50H
Quantity Available:		2

..........................

40mm (1.6in) metal housing mylar speaker 0.25W

40mm (1.6in) metal housing mylar speaker 0.25W

Specifications:

0.25W
40mm (1.57in)
16 Ohm
RoHS Compliant
Includes 5 inch wires already soldered to contacts of the speaker.

Quantity	Price
1 – 9	$0.61
10 – 99	$0.51
100 – 999	$0.46
1000 +	$0.39

Skill Level of Item:		Component or Part
Product #		PB240
Quantity Available:		256

..........................

Speaker Round 3 inch 8 ohm 1 watt

Specifications:

Diameter: 76mm (3 inch)
1 Watt
8 Ohm

Quantity	Price
1 – 9	$3.99
10 – 99	$3.78
100 – 999	$3.47
1000 +	$3.19

Skill Level of Item:		Component or Part
Product #		PB244
Quantity Available:		83

..........................

Recording Module 20 second - card type

20 second card type recording unit. This module can be pasted (self-adhesive backing) into birthday cards, Christmas cards etc. When the card is opened your message will be played. You can record your own custom 20 second message with the built in microphone. The module is pre wired with a speaker and battery. All that is left for you to do is to record a message, past the module in your card and remove the little plastic tubing from the metal strip that protects the battery from running down when shipped from the factory.

Product Information:
Description: 20 second recording card module
Size: Length : 105mm, Width : 65mm, Height: 6.4mm (4.1"x 2.6" x 0.25")
Accessories: Battery Insulator, Battery G10 3pcs, Speaker 40mm (1.6")
Function: Record & Play back
Operation: Record : Press switch. Play back : Open the card.
Length of record: 20 seconds
RoHS compliant: YES

Quantity	Price
1 – 9	$5.85
10 – 99	$5.75
100 +	$5.45

Skill Level of Item:		Assembled and Tested
Product #		CT94R
Quantity Available:		312

..........................

5 minute sound recording module. 5 separate messages. speaker, microphone & switches included.

CLOSEOUT ITEM - LOWER PRICE, WHILE STOCK LASTS.
Price was: $19.94

Record and playback a total of up to 5 minutes! Up to 5 separate messages can be recorded and play back with 5 separate push switches. The 5 segments share a total of 5 minutes. Microphone, speaker and push switches included.

Specifications:

PCB size: 1.9" x 1.6"
Wire length of push switches: approx 3.5"
Requires 4 x AAA batteries (not included).

Quantity	Price
1 – 9	$14.99
10 – 99	$13.99
100 +	$12.99

Skill Level of Item:		Assembled and Tested
Product #		BD43
Quantity Available:		339

..........................

40 second Non-volatile multi message recorder kit

Non-volatile multi message recorder using ISD chips. Just change one resistor for longer duration. Standalone operation using just six onboard bottons. Record via built-in microphone or external line in. Speaker and line out connector. SPI interface. SPI mode allows full control of the chip via the serial interface. This includes random access to any location inside the memory array by specifying the start and end address. SPI mode also allows access to an internal register for configuration of audio paths, inputs, outputs and mixing.

8-24 VDC. PCB Dimensions: 2.75" x 2"
Please note: Speaker not included.

Quantity	Price
1 – 9	$36.82
10 – 99	$34.20
100 +	$33.06

Skill Level of Item:		Kit - Basic Soldering Required
Product #		CPS188
Quantity Available:		1

..........................

120 second Non-volatile multi message recorder kit

Quantity	Price
1 – 9	$39.24
10 – 99	$36.45
100 +	$35.24

Skill Level of Item:		Kit - Basic Soldering Required
Product #		CPS189
Quantity Available:		1

..........................

Extended record / playback module (8 minutes)

Description:
The K8094 allows you to record and play messages of up to 8 minutes long. Recording speed is continuously adjustable so that you can choose a perfect compromise between duration and sound quality. It also allows you to generate funny sound effects. Messages are retained in memory at power loss. The unit comes complete with microphone, line level in- and output and an output for a small speaker. Applications: Play messages in musea, stores, interactive installations, scale models, toys, as doorbell, gadget, etc…

Features:

record duration:
- standard quality: 8 minutes
- High quality: 2 minutes 40s.
built-in microphone
line level in- and output
pushbutton control (suited for open collector control)
Read More...

Quantity	Price
1 – 9	$34.79
10 – 99	$32.33
100 +	$31.25

Skill Level of Item:		Kit - Basic Soldering Required
Product #		K8094
Quantity Available:		5

You might also consider these items:

Voice Recording Module 2 x 20sec sections

CLOSEOUT ITEM - WHILE STOCK LASTS.

Features:

Non volatile flash memory technology
No battery back up required
User friendly, easy to operate
Slide switch for record or play back
Separate key to trigger message 1 or 2
Low power consumption
LED to indicate recording and playback
Built-in condenser mic
Automatic power down
5-6V Operation.

Quantity	Price
1 – 9	$8.89
10 – 99	$8.42
100 – 999	$7.72
1000 +	$4.95

..........................

A96010 kit (A96010 with wires and speaker included)

PLEASE NOTE: This module, part# A96010, is actually an A93010. It is virtually identical to the A96010 and it operates the same, but downloadable datasheets are available for each for comparison if necessary. The small size is because the IC is in Chip-on-board form. One button is pushed down to record the message through the on-board electret microphone; A LED turns on during this time. The other button just has to be momentarily pressed to replay the message. A second momentary press during playback will stop the playback. Sampling rate is 4K. All you have to add is the speaker (not included) and 5V DC power (not included). We also have an A96010-kit which in addition to the part# A96010 also includes a speaker and two cable connectors to connect the unit to a power supply (not included) and the speaker. The record/play time is determined by the 52K resistor. If you change it to 89K you will get 30 seconds but at a reduced sampling rate. Operating current 25mA. Standby current 10 uA. Size: 34 x 23 x 11 mm. The module comes supplied as you see it in the photo.

This is a kit which include the following items:
1 x A96010 voice recording module (20 second message)
2 x Connector cable to connect the voice recorder to a speaker and power source.
1 x 1watt 3inch 8ohm Speaker
(you will need to connect the connector cables to the speaker and a power supply preferably by soldering)

Not included:
1 x Battery holder that can hold either 4 x AAA or 4 x AA or 4 x C or 4 x D cells. See our battery holders.

Quantity	Price
1 – 9	$9.12
10 – 99	$8.64
100 +	$7.92

..........................

BATTERY HOLDER FOR 4 x AA-CELL (WITH SNAP TERMINALS)

Specifications:
with snap terminals
(BH341B)

Quantity	Price
1 – 9	$0.71
10 – 99	$0.59
100 +	$0.53

Skill Level of Item:		Component or Part
Product #		BH341B
Quantity Available:		23

..........................

20 second voice recorder/playback module (A93010)

Quantity	Price
1 – 9	$6.60
10 – 99	$5.95
100 – 999	$4.95
1000 +	$3.95

..........................

Click here for specs, downloads &/or more pictures...

BATTERY HOLDER FOR 4 x AAA-CELL (WITH SOLDER TAGS)

Specifications:

with solder tags (BH443D)

Quantity	Price
1 – 9	$0.53
10 – 99	$0.45
100 +	$0.41

Skill Level of Item:		Component or Part
Product #		BH443D
Quantity Available:		50

..........................

20 Second recording module with 9V battery Connector

20 second non-volatile recordable IC.
Includes Electret microphone for recording.
40mm Mylar speaker included.
Operating Voltage: 9V (battery not included)
Operating Current: <= 40mA (average)
Standby Current <= 0.2mA
PCB size: 1.8" x 1" (45mm x 25mm)

Quantity	Price
1 – 9	$7.95
10 – 99	$7.55
100 – 999	$6.89
1000 +	$6.59

..........................

10 Sec Recording Module in white case with 3 section slide switch

Features:

Ideal for plush toy, or any kind of talking toys.
Message retained when batteries are removed.
Built-in microphone and LED recording indicator.
Message is retained when batteries are removed.
40mm (1.6") Mylar speaker
Sound output of more than 85dB at 10cm (3.9") distance (surrounding at 60dB).

Operation:
Record: Slide the switch to the "REC" position. Press and hold the top of the housing. While the LED recording indicator is on, speak into the built-in microphone about 8-10 cm away with a normal speaking voice. Release the top to end recording. (Recording automatically stops when memory is full.)
Play: Slide the switch to the "PLAY" position, and press the top of the housing to play.

Quantity	Price
1 – 9	$3.96
10 – 99	$3.76
100 – 999	$3.46
1000 +	$3.11

Skill Level of Item:		Assembled and Tested
Product #		BRM06N
Quantity Available:		2,614