Your Cart is Empty
View Cart
 
 
Audio Effects and Sound Modules
10 Sec Recording Module in white case with 3 section slide switch
Click here for specs, downloads, and more pictures.
Features:
  • Ideal for plush toy, or any kind of talking toys. 
  • Message retained when batteries are removed.
  • Built-in microphone and LED recording indicator.
  • Message is retained when batteries are removed.
  • 40mm (1.6") Mylar speaker
  • Sound output of more than 85dB at 10cm (3.9") distance (surrounding at 60dB).

Operation:
Record: Slide the switch to the "REC" position. Press and hold the top of the housing. While the LED recording indicator is on, speak into the built-in microphone about 8-10 cm away with a normal speaking voice. Release the top to end recording. (Recording automatically stops when memory is full.)
Play: Slide the switch to the "PLAY" position, and press the top of the housing to play.
Read More
  Assembled and Tested  
  BRM06N  
  4,714  
Quantity:  

30 Sec. Recording Module in white case with 3 section slide switch
Click here for specs, downloads, and more pictures.
Features:
  • Ideal for plush toy, or any kind of talking toys. 
  • Message retained when batteries are removed.
  • Built-in microphone and LED recording indicator.
  • Message is retained when batteries are removed.
  • 40mm (1.6") Mylar speaker
  • Sound output of more than 85dB at 10cm (3.9") distance (surrounding at 60dB).

Operation:
Record: Slide the switch to the "REC" position. Press and hold the top of the housing. While the LED recording indicator is on, speak into the built-in microphone about 8-10 cm away with a normal speaking voice. Release the top to end recording. (Recording automatically stops when memory is full.)
Play: Slide the switch to the "PLAY" position, and press the top of the housing to play.
Read More
  Assembled and Tested  
  BRM14M  
  307  
Quantity:  

30 Sec. Recording Module in white case with slide switch and playback in ROBOT SOUND
Click here for specs, downloads, and more pictures.

Features:
  • Ideal for plush toy, or any kind of talking toys.
  • Changes voice to sound like a robot.
  • Message retained when batteries are removed.
  • Built-in microphone and LED recording indicator.
  • Message is retained when batteries are removed.
  • 40mm (1.6") Mylar speaker
  • Sound output of more than 85dB at 10cm (3.9") distance (surrounding at 60dB).

Operation:
Record: Slide the switch to the "REC" position. Press and hold the top of the housing. While the LED recording indicator is on, speak into the built-in microphone about 8-10 cm away with a normal speaking voice. Release the top to end recording. (Recording automatically stops when memory is full.)
Play: Slide the switch to the "PLAY" position, and press the top of the housing to play.
Read More
  Assembled and Tested  
  BRM14M-ROBOT  
  7  
Quantity:  

30 Sec. Recording Module in white case with slide switch and playback in KIDS SOUND
Click here for specs, downloads, and more pictures.

Features:
  • Ideal for plush toy, or any kind of talking toys.
  • Changes voice to sound like a kid.
  • Message retained when batteries are removed.
  • Built-in microphone and LED recording indicator.
  • Message is retained when batteries are removed.
  • 40mm (1.6") Mylar speaker
  • Sound output of more than 85dB at 10cm (3.9") distance (surrounding at 60dB).

Operation:
Record: Slide the switch to the "REC" position. Press and hold the top of the housing. While the LED recording indicator is on, speak into the built-in microphone about 8-10 cm away with a normal speaking voice. Release the top to end recording. (Recording automatically stops when memory is full.)
Play: Slide the switch to the "PLAY" position, and press the top of the housing to play.
Read More
  Assembled and Tested  
  BRM14M-KID  
  3  
Quantity:  

60 Sec Recording Module in white case (with on/off & 2-way slide switch)
Click here for specs, downloads, and more pictures.
Features:
  • Ideal for plush toy, or any kind of talking toys. 
  • Message retained when batteries are removed.
  • Built-in microphone and LED recording indicator.
  • 40mm (1.6") Mylar speaker
  • Sound output of more than 85dB at 10cm (3.9") distance (surrounding at 60dB).

Operation:
Record: Slide the switch to the "REC" position. Press and hold the top of the housing. While the LED recording indicator is on, speak into the built-in microphone about 8-10 cm away with a normal speaking voice. Release the top to end recording. (Recording automatically stops when memory is full.)
Play: Slide the switch to the "PLAY" position, and press the top of the housing to play.
Read More
  Assembled and Tested  
  BRM1M  
  166  
Quantity:  

75 second USB recording module
tn_usb2mv2_general.png
This module plugs directly into the USB port of your PC. Then use the free software to record up to 75 seconds of .wav file to this module. Comes with batteries and speaker ready for use.

Features:
  • Up to 75 seconds of re-recordable voice message (8K sample rate)
  • Use USB type-A male connector for direct plug into USB port of PC (USB2.0)
  • Easy to transfer of WAV audio file software for windows .
  • Choice of sampling rate.
  • 75 seconds non-volatile recordable IC.
  • Operating Voltage 4.5V (3 x LR44 batteries included)
  • Operating Current < 50 mA
  • Standby Current < 5 uA
  • Push switch for playback / stop
  • Speaker 40mm metal housing mylar speaker (included)

Dimensions:
Main board: Excluding USB connector: 2.15" x 1.13"
                     Including USB connector: 2.74" x 1.13"
Battery board: 2.25" x 0.8"
Speaker:      1.6" (diameter) 40mm

System Requirements:
  • Unused USB port on computer
  • Windows XP, Vista, or 7 (Does NOT work on Windows 8 or 8.1)
  • 3 x LR44 Watch Type Batteries (Included)

This unit will directly plug into the USB port of your computer. A USB cable is NOT required. However if you do want to plug the unit into a extension USB cable first, you can order our A-male to A-female USB extension cable product number: 
Read More
  Assembled and Tested  
  USB2MV2  
  895  
Quantity:  

300 second (5 minutes) USB recording module
Click here for specs, downloads, and more pictures.
 (Out of Stock)Currently out of stock until the end of November. (This item is an alternative in the meantime)

This module plugs directly into the USB port of your PC. Then use the free software to record up to 300 seconds of .wav files to this module. Comes with a speaker and a line out for an additional amplifier or external speakers.

Features
  • Up to 300 seconds of re-recordable voice message (8K sample rate)
  • Includes 6 different playback settings including repeat and continuous playback.
  • Use USB type-A male connector for direct plug into USB port of PC (USB1.1)
  • Easy to transfer software for windows of WAV audio file.
  • Choice of 8K or 12K sample rate.
  • 300 seconds non-volatile recordable IC.
  • Operating Voltage 4.5V
  • Operating Current < 50 mA
  • Standby Current < 5 uA
  • 4 Push switches for playback / stop of up to four different messages
  • 40mm metal housing mylar speaker (included)
  • 3.5mm (1/8") mono audio output

Dimensions:
Main board - Excluding USB connector: 55mm x 30mm
                     - Including USB & line-out connectors: 72mm x 30mm
Speaker:  40mm (diameter)

System Requirements:
  • Unused USB port on computer
  • Windows XP, Vista, or 7 (Does NOT work on Windows 8 or 8.1)
  • 3 x AAA Batteries (Not included)
This unit will directly plug into the USB port of your computer. A USB cable is NOT required. However if you do want to plug the unit into a extension USB cable first, you can order our A-male to A-female USB extension cable product number:

Read More
  Assembled and Tested  
  USB5M  
  0  
Quantity:  

USB6M - 300 second USB recording module WITH LIGHT SENSOR
Click here for specs, downloads, and more pictures.
This module plugs directly into the USB port of your PC. Then use the free software to record up to 300 seconds of .wav files to this module in five segments. Comes with a speaker and a line out for an additional amplifier or external speakers.

Features: 
  • 300 seconds of re-recordable voice message on 5 segments (4 buttons and one sensor). (8K sample rate)
  • 24 / 75 / 150 / 300 / 600 / 1200 seconds available at request (MOQ 1k except 75 sec USB2MV2 already available).
  • Supports up to 4 switches and 2 sensors simultaneously
  • 40mm metal housing mylar speaker
  • 3.5mm (1/8") mono-audio output
  • Supports multi-section sound
  • Use USB type-A male connect for direct plug in to USB port of PC. (USB1.1)
  • Ideal for transferring custom messages for different applications.
  • Adjustable sensitivity for PIR sensor
  • Record sound files from PC with provided software
  • Please click picture and see next page for software operation/download
System Requirements: 
  • Unused USB port on computer
  • Windows XP, Vista, or 7 (Does NOT work on Windows 8 or 8.1)
  • 3 x AAA Batteries (Not included)

This unit will directly plug into the USB port of your computer. A USB cable is NOT required. However if you do want to plug the unit into a extension USB cable first, you can order our A-male to A-female USB extension cable product number: 
Read More
  Assembled and Tested  
  USB6M  
  139  
Quantity:  

300 second USB recording module W/LIGHT SENSOR & PIR for MOTION ACTIVATION
Click here for specs, downloads, and more pictures.
This module plugs directly into the USB port of your PC. Then use the free software to record up to 300 seconds of .wav files to this module over 5 segments. Comes with a speaker and a line out for an additional amplifier or external speakers.

Playback can be triggered by any of the following: pressing one of 4 push buttons; motion picked up by the PIR sensor, and/or change in light level via the Photo cell light sensor.


Features: 
  • 300 seconds of re-recordable voice message over 5 segments. (8K sample rate)
  • 24 / 75 / 150 / 300 / 600 / 1200 seconds available at request (MOQ 1k except 75 sec USB2MV2 already available).
  • Supports up to 4 switches and 2 sensors simultaneously
  • 40mm metal housing mylar speaker
  • 3.5mm (1/8") mono-audio output
  • Supports multi-section sound
  • 1 x PIR with connector included
  • Use USB type-A male connect for direct plug in to USB port of PC. (USB1.1)
  • Ideal for transferring custom messages for different applications.
  • Adjustable sensitivity for PIR sensor
  • PIR Range: 9 - 13 feet.
  • Record sound files from PC with provided software
  • Please click picture and see next page for software operation/download
System Requirements:
  • Unused USB port on computer
  • Windows XP, Vista, or 7 (Does NOT work on Windows 8 or 8.1)
  • 3 x AAA Batteries (Not included)
This unit will directly plug into the USB port of your computer. A USB cable is NOT required. However if you do want to plug the unit into a extension USB cable first, you can order our A-male to A-female USB extension cable product number: 
Read More
  Assembled and Tested  
  USB6M+PIR  
  139  
Quantity:  

300 second USB recording module with MOTION SENSOR and black enclosure
tn_usb7m-sb_general.png
This module connects to your computer via a USB cable (not included). Then use the free software to record up to 300 seconds of .wav files to it. The software is very powerful and will allow you to stack wave files and program pauses so the sensor can be used to trigger up to 200 different messages - or a different group of messages each time, up to 100 groups! (The messages or group of messages are played sequentially each time MOTION is detected). Comes with a built-in speaker.

Features:
  • Up to 300 seconds of re-recordable voice message (8K sample rate)
  • Includes 6 different playback settings including repeat and continuous playback
  • Motion Detection 3 to 4 feet. 
  • Detection method - Change in light level.
  • Use USB type-B male connector for direct plug into USB cable (not included)
  • Easy to transfer software for windows of .wav audio files
  • Choice of sample rates
  • 300 seconds non-volatile recordable IC.
  • Operating Voltage 4.5V (3 x AA batteries not included)
  • Operating Current < 50 mA
  • Standby Current < 5 uA
  • 55mm built-in speaker (included)
Dimensions: 65 x 94 x 26mm

System Requirements:
  • Type "A" Male to type "B" Male USB cable (Not included. Click here for one)
  • Unused USB port on computer
  • Windows XP, Vista, or 7 (Does NOT work on Windows 8 or 8.1)
  • 3 x AA Batteries (Not included)

Read More
  Assembled and Tested  
  USB7M-SB  
  412  
Quantity:  

300 second (5 minutes) USB recording module with PUSH-SWITCH and white enclosure
tn_usb7m-bw_general.png
This module connects to your computer via a USB cable (not included). Then use the free software to record up to 300 seconds of .wav files to it. The software is very powerful and will allow you to stack wave files and program pauses so the same button can be used to trigger up to 200 different messages! (The messages are played sequentially each time the PUSH-BUTTON is pressed) Comes with a built-in speaker.

Features:
  • Up to 300 seconds of re-recordable voice message (8K sample rate)
  • Includes 6 different playback settings including repeat and continuous playback
  • Use USB type-B male connector for direct plug into USB cable
  • Easy to transfer software for windows of .wav audio files
  • Choice of 8K or 12K sample rate.
  • 300 seconds non-volatile recordable IC.
  • Operating Voltage 4.5V (3 x AA batteries not included)
  • Operating Current < 50 mA
  • Standby Current < 5 uA
  • Front push switch playback
  • 55mm built-in speaker (included)
Dimensions: 65 x 94 x 26mm

System Requirements: 
  • Type "A" Male to type "B" Male USB cable (Not included. Click here for one)
  • Unused USB port on computer
  • Windows XP, Vista, or 7 (Does NOT work on Windows 8 or 8.1)
  • 3 x AA Batteries (Not included)
Read More
  Assembled and Tested  
  USB7M-BW  
  223  
Quantity:  

20 Second Voice Recorder/Playback Module (A93010)
tn_a96010_general.png
PLEASE NOTE: This module, part# A96010, is actually an A93010. It is virtually identical to the A96010 and it operates the same, but downloadable datasheets are available for each for comparison if necessary. The small size is because the IC is in Chip-on-board form. One button is pushed down to record the message through the on-board electret microphone; A LED turns on during this time. The other button just has to be momentarily pressed to replay the message. A second momentary press during playback will stop the playback. Sampling rate is 4K. All you have to add is the speaker (not included) and 5V DC power (not included). We also have an A96010-kit which in addition to the part# A96010 also includes a speaker and two cable connectors to connect the unit to a power supply (not included) and the speaker. The record/play time is determined by the 52K resistor. If you change it to 89K you will get 30 seconds but at a reduced sampling rate. Operating current 25mA. Standby current 10 uA. Size: 34 x 23 x 11 mm. The module comes supplied as you see it in the photo. 

OPTIONAL ITEMS (Not included):
  • 2 x (BB089) connector cable to connect the voice recorder to a speaker and power source.
  • 1 x (PB244) Speaker
  • 1 x Battery holder that can hold either 4 x AAA or 4 x AA or 4 x C or 4 x D cells. See our battery holders.
Read More
  Assembled and Tested  
  A96010  
  46  
Quantity:  

A96010 Kit (A96010 with Wires and Speaker Included)
tn_a96010-kit_general.png
PLEASE NOTE: This module, part # A96010, is actually an A93010. It is virtually identical to the A96010 and it operates the same, but downloadable datasheets are available for each for comparison if necessary. The small size is because the IC is in Chip-on-board form. One button is pushed down to record the message through the on-board electret microphone; A LED turns on during this time. The other button just has to be momentarily pressed to replay the message. A second momentary press during playback will stop the playback. Sampling rate is 4K. All you have to add is the speaker (not included) and 5V DC power (not included). We also have an A96010-kit which in addition to the part# A96010 also includes a speaker and two cable connectors to connect the unit to a power supply (not included) and the speaker. The record/play time is determined by the 52K resistor. If you change it to 89K you will get 30 seconds but at a reduced sampling rate. Operating current 25mA. Standby current 10 uA. Size: 34 x 23 x 11 mm. The module comes supplied as you see it in the photo.

This is a kit which includes the following items:
  • 1 x A96010 voice recording module (20 second message)
  • 2 x Connector cable to connect the voice recorder to a speaker and power source.
  • 1 x 1watt 3inch 8ohm Speaker
  • (You will need to connect the connector cables to the speaker and a power supply preferably by soldering)

Not included:
  • 1 x Battery holder that can hold either 4 x AAA or 4 x AA or 4 x C or 4 x D cells. See our battery holders.
Read More
  Partially Assembled  
  A96010-kit  
  36  
Quantity:  

40 Second Voice Recorder/Playback Module (A93010A)
tn_a93010a_general.png
The small size is because the IC is in Chip-on-board form. One button is pushed down to record the message through the on-board electret microphone; A LED turns on during this time. The other button just has to be momentarily pressed to replay the message. A second momentary press during playback will stop the playback. Sampling rate is 12KHz. All you have to add is the speaker (not included) and 5V DC power (not included). We also have an A93010A-kit which in addition to the part# A93010A also includes a speaker and two cable connectors to connect the unit to a power supply (not included) and the speaker. Operating current 25mA. Standby current 10 uA. Size: 34 x 23 x 11 mm. The module comes supplied as you see it in the photo. 

OPTIONAL ITEMS (Not included):
  • 2 x (BB089) connector cable to connect the voice recorder to a speaker and power source.
  • 1 x (PB244) Speaker
  • 1 x Battery holder that can hold either 4 x AAA or 4 x AA or 4 x C or 4 x D cells. See our battery holders.
Read More
  Assembled and Tested  
  A93010A  
  86  
Quantity:  

20 Second recording module with 9V battery Connector
Click here for specs, downloads, and more pictures.
Fully Assembled and tested. All you need to do is add a 9V Battery.

Record:
Press and hold “Record” switch. LED indicator turns on and start recording. Release switch to finish recording, and LED turns off.
Play: Press “Play” switch to play complete message once.

Specifications:
  • 20 second non-volatile recordable IC.
  • Includes Electret microphone for recording.
  • 40mm Mylar speaker included.
  • Operating Voltage: 9V (battery not included)
  • Operating Current: <= 40mA (average)
  • Standby Current <= 0.2mA
  • PCB size: 1.8" x 1" (45mm x 25mm)
Read More
  Assembled and Tested  
  BR9  
  158  
Quantity:  

Recording Module 20 Second - Card Type
Click here for specs, downloads, and more pictures.
Description: 20 second card type recording unit. This module can be pasted (self-adhesive backing) into birthday cards, Christmas cards etc. When the card is opened your message will be played. You can record your own custom 20 second message with the built in microphone. The module is pre wired with a speaker and battery. All that is left for you to do is to record a message, past the module in your card and remove the little plastic tubing from the metal strip that protects the battery from running down when shipped from the factory.

Product Information:
  • Description: 20 second recording card module
  • Size:Length : 105mm, Width : 65mm, Height: 6.4mm(4.1"x 2.6" x 0.25")
  • Accessories: Battery Insulator, Battery G10 3pcs, Speaker 40mm (1.6")
  • Function: Record & Play back
  • Operation: Record : Press switch. Play back : Open the card.
  • Length of record: 20 seconds
Read More
  Assembled and Tested  
  CT94R  
  155  
Quantity:  

5 minute sound recording module. 5 separate messages. speaker, microphone & switches included.
Click here for detailed specs.
 (Out of Stock)THIS ITEM (BD43) NOT CURRENTLY AVAILABLE FOR SALE.
Price was: $19.94

Record and playback a total of up to 5 minutes! Up to 5 separate messages can be recorded and play back with 5 separate push switches. The 5 segments share a total of 5 minutes. Microphone, speaker and push switches included. 

Specifications:
  • PCB size: 1.9" x 1.6"
  • Wire length of push switches: approx 3.5"
  • Requires 4 x AAA batteries (not included).
Read More
  Assembled and Tested  
  BD43  
  0  
5 Minutes Recording Module - Separated in 5 Segments - Module ONLY
Click here for detailed specs.
CLOSEOUT ITEM - LOWER PRICE, WHILE STOCK LASTS.
Price was: $15.99

PLEASE NOTE: This is just the module. Doesn't include the microphone, speaker battery box etc., that plugs into this module.

Record and playback a total of up to 5 minutes! Up to 5 separate messages can be recorded and played back. The 5 segments share a total of 5 minutes.

Specifications:
  • PCB size: 1.9" x 1.6"
  • 6V DC
For the module including the microphone, speaker battery box and switches see product #BD43
Read More
  Assembled and Tested  
  BD43PCB  
  114  
Quantity:  

40 Second Non-Volatile Multi Message Recorder Kit
Click here for detailed specs.
Description: Non-volatile multi message recorder using ISD chips. Just change one resistor for longer duration. Standalone operation using just six onboard bottons. Record via built-in microphone or external line in. Speaker and line out connector. SPI interface. SPI mode allows full control of the chip via the serial interface. This includes random access to any location inside the memory array by specifying the start and end address. SPI mode also allows access to an internal register for configuration of audio paths, inputs, outputs and mixing. 

8-24 VDC. PCB Dimensions: 2.75" x 2"

Please Note:
Speaker not included.
Read More
  Kit - Basic Soldering Required  
  CPS188  
  1  
Quantity:  

ISD1740 ChipCorder
Click here for specs, downloads and more pictures.
The specific model you are buying: ISD1740

The Winbond® ISD1700 ChipCorder® Series is a high quality, fully integrated, single-chip multimessage
voice record and playback device ideally suited to a variety of electronic systems. The
message duration is user selectable in ranges from 26 seconds to 120 seconds, depending on the
specific device. The sampling frequency of each device can also be adjusted from 4 kHz to 12 kHz
with an external resistor, giving the user greater flexibility in duration versus recording quality for each
application. Operating voltage spans a range from 2.4 V to 5.5 V to ensure that the ISD1700 devices
are optimized for a wide range of battery or line-powered applications.
Read More
  Component or Part  
  BB286  
  4  
Quantity:  

120 Second Non-Volatile Multi Message Recorder Kit
Click here for detailed specs.
Description: Non-volatile multi message recorder using ISD chips. Just change one resistor for longer duration. Standalone operation using just six onboard bottons. Record via built-in microphone or external line in. Speaker and line out connector. SPI interface. SPI mode allows full control of the chip via the serial interface. This includes random access to any location inside the memory array by specifying the start and end address. SPI mode also allows access to an internal register for configuration of audio paths, inputs, outputs and mixing.
8-24 VDC. PCB Dimensions: 2.75" x 2"

Please Note: Speaker not included.
Read More
  Kit - Basic Soldering Required  
  CPS189  
  2  
Quantity:  

ISD17120 ChipCorder
Click here for specs, downloads and more pictures.
The specific model you are buying: ISD17120

The Winbond® ISD1700 ChipCorder® Series is a high quality, fully integrated, single-chip multimessage
voice record and playback device ideally suited to a variety of electronic systems. The
message duration is user selectable in ranges from 26 seconds to 120 seconds, depending on the
specific device. The sampling frequency of each device can also be adjusted from 4 kHz to 12 kHz
with an external resistor, giving the user greater flexibility in duration versus recording quality for each
application. Operating voltage spans a range from 2.4 V to 5.5 V to ensure that the ISD1700 devices
are optimized for a wide range of battery or line-powered applications.
Read More
  Component or Part  
  BB266  
  5  
Quantity:  

PCB of the CPS188/CPS189 K188/K189 ONLY
Click here for specs, downloads and more pictures.
PLEASE NOTE: This is the unpopulated PCB of the CPS188/CPS189  K188/K189 only. 

Dimensions: 2.75" x 2"
Read More
  Component or Part  
  BB292  
  4  
Quantity:  

Melody Card Happy Birthday COB Module
Click here for detailed specs.
Complete Card Melody Unit- 'Happy Birthday' Melody IC COB, battery and piezo all ready to play. As found in Christmas cards and books which play when you open the page. Self-adhesive backing. Tune repeats continuously while power is connected. Total of 128 notes. Cmos LSI.
Read More
  Assembled and Tested  
  SG13  
  975  
Quantity:  

Melody Card X-mas Tunes (Jingle Bells + Santa Claus + We Wish You a Merry X'mas) COB Module
Click here for detailed specs.
 (Out of Stock)Complete melody card unit- 'Three Christmas Carols' (Jingle Bells + Santa Claus + We Wish You a Merry X'mas) Melody IC COB, battery and piezo all ready to play. As found in Christmas cards and books which play when you open the page. Self-adhesive backing. Tune repeats continuously while power is connected. Total of 128 notes. Cmos LSI. (SG14)
Read More
  Assembled and Tested  
  SG14  
  0  
Quantity:  

Melody Card Telephone Ring COB Module
Click here for detailed specs.
Complete Card Melody Unit- 'Telephone Ring' Melody IC COB, battery and piezo all ready to play. As found in Christmas cards and books which play when you open the page. Self-adhesive backing. Duration 8.8 seconds. Melody repeats continuously while power is connected. Cmos LSI. (SG247)
Read More
  Assembled and Tested  
  SG247  
  371  
Quantity:  

Child's Phone COB Module kit
Click here for specs, downloads and more pictures.
Cellular phone sounds imitates real phone tones, engaged and ringing sounds, two door chimes. Kit includes 8 x switches, 1Watt 8ohm speaker, 2 x AA batery holder, COB and mother board. COB PCB size: 16mm x 29mm. (CPSSG2M)
Read More
  Kit - Basic Soldering Required  
  CPSSG2M  
  6  
Quantity:  

Child's Phone COB PCB
Click here for specs, downloads and more pictures.
Cell phone sounds. 


PLEASE NOTE: This is only the COB PCB. For the complete kit see CPSSG2M.
(SG2COB)
Read More
  Component or Part  
  SG2COB  
  817  
Quantity:  

Sixteen door chime tunes COB Module kit
Click here for specs, downloads and more pictures.
Sixteen door chime tunes. Tunes cycle through the sixteen tunes with each keypress. A LED fluctuates according to the sound level. Designed for high quality melody products. Kit includes 1 x switch, 1Watt 8ohm speaker, 2 x AA batery holder, COB and mother board. (CPSSG3M)
Read More
  Kit - Basic Soldering Required  
  CPSSG3M  
  31  
Quantity:  

Sixteen door chime tunes COB PCB
Click here for specs, downloads and more pictures.
PLEASE NOTE: This is only the COB PCB. For the complete kit see CPSSG3M.
(SG3COB)
Read More
  Component or Part  
  SG3COB  
  900  
Quantity:  

Ding/Dong Door Chime COB Module kit
Click here for specs, downloads and more pictures.
Ding/dong door chime the classic door chime ding dong. Adjust the component values in the two RC networks to get exactly the tones you want. 3V low stand-by current. Kit includes 1 x switch, 1Watt 8ohm speaker, 2 x AA batery holder, COB and mother board. COB PCB size: 16mm x 29mm.(CPSSG5)
Read More
  Kit - Basic Soldering Required  
  CPSSG5  
  5  
Quantity:  

Ding/Dong Door Chime COB PCB ONLY (14pin)
Click here for specs, downloads and more pictures.
PCB size: 1"x1/2" (SG5COB). 
PLEASE NOTE: This is only the COB PCB. For the complete kit see CPSSG5
Read More
  Component or Part  
  SG5COB  
  2,621  
Quantity:  

Ding Dong Doorbell COB M581 C601 (5pin)
Click here for specs, downloads and more pictures.
Description: The C601 is a "ding dong" sound generator in COB form. This circuit is specially designed for doorbell or alarm application. Features include wide operation voltage from 1.5-5.0 volts, true one shot-one time "Ding Dong", build in oscillator-no ext resistor and minimum external component. PCB size: 1/2"x3/4"
Read More
  Component or Part  
  BB063  
  2  
Quantity:  

FK512: DING/DONG DOOR CHIME (PIR SENSOR)
Click here for specs, downloads, and more pictures!
Specifications:
  • A detector circuit that uses a PIR (Pyroelectric infrared) sensor to detect infrared radiation from human and animal body.
  • Having fractional round and flat lens to increase detecting efficiency.
  • Power supply: 4.5-6 VDC.
  • Consumption: 7 mA@4.5 VDC. (Stand by) 180 mA@4.5 VDC. (Working)
  • Detection range: 5 m. (round len) 8 m. (flat len)
  • PCB dimensions: 3.07x1.76 in
  • Read More...

Read More
  Kit - Basic Soldering Required  
  FK512  
  4  
Quantity:  

DING DONG
Click here for specs, downloads and more pictures.
Features:
  • classic 'ding dong'-sound
  • plays 'dingdong'-sequence twice when triggered
  • early retrigger prevention 
  • attractive, compact design 
  • speaker included
  • on-board pushbutton
  • input for external pushbutton 
  • low power consumption 
Read More
  Kit - Basic Soldering Required  
  MK177  
  2  
Quantity:  

Four Train Sounds COB Module Kit
Click here for specs, downloads and more pictures.
Description: Four Train Sounds: whistle-blowing, chugging, level crossing bell and clackety-clack of train crossing bridge. Kit includes 4 x switches, 1Watt 8ohm speaker, 2 x AA battery holder, COB and mother board. COB PCB size: 16mm x 29mm.
Read More
  Kit - Basic Soldering Required  
  CPSSG1M  
  4  
Quantity:  

4 train sounds COB Module PCB ONLY
Click here for specs, downloads and more pictures.
PCB size: 1"x1/2" (SG1COB). Please note: This is only the COB PCB. For the complete kit see CPSSG1M
Read More
  Component or Part  
  SG1COB  
  773  
Quantity:  

Steam Engine Sound Generator with Whistle (Kit)
Click here for specs, downloads and more pictures.
Description: Generates sound of a vintage steam engine. Adjustable 'speed' and volume. Great for model railroads, radio plays, stage, as gadget. With 'steam whistle'-push button. 

Specifications:
  • Power supply: 9V battery (not incl.)
  • Comes with 8 ohm/0.5W miniature speaker
  • Dimensions: 3.9" x 3.3"
Read More
  Kit - Basic Soldering Required  
  MK134  
  4  
Quantity:  

Siren Sound Generator COB
Click here for specs, downloads and more pictures.
Siren sound generator PCB size: 18mm x 15mm. COB contains a standard siren driver as found in piezo horns and toys. Drive circuit will tolerate a wide range of components values. 2V to 5V operation. It has automatic power down & a standby current of < 2uA. (CPSSG11)
Read More
  Component or Part  
  CPSSG11  
  1,010  
Quantity:  

Gun, Sirens, Bombs COB Module (KIT)
Click here for specs, downloads and more pictures.
8 different sounds. Bomb falling, 4 descending tones, hee-haw siren, oscillating siren, rifle shot echo, bomb burst, siren, machine gun. Kit includes 8 x switches, 1Watt 8ohm speaker, 2 x AA batery holder, COB and mother board. COB PCB size: 16mm x 29mm. (CPSSG12)
Read More
  Kit - Basic Soldering Required  
  CPSSG12  
  4  
Quantity:  

Gun, Sirens, Bombs COB Module PCB ONLY
Click here for specs, downloads and more pictures.
This is the COB ic attached to the PCB only of kit CPSSG12. (mother board not included)
(SG12COB)
Read More
  Component or Part  
  SG12COB  
  688  
Quantity:  

SIREN SOUND GENERATOR
Click here for specs, downloads and more pictures.
Generates 4 different sounds : police siren, fire brigade, emergency vehicle and laser gun. RV1 adjusts sound pitch. On/off switch and PCB speaker included. 

Specifications: 
  • power supply: 9V battery (not incl.) 
  • dimensions: 2.4" x 1.6" (MK113)
Read More
  Kit - Basic Soldering Required  
  MK113  
  2  
Quantity:  

POLICE SIREN
Click here for specs, downloads and more pictures.
Enter the world of amazing electronic sounds and noises. Create or imitate sirens of all kinds by adjusting 3 trimmers. Powerful sound with a 2W amplifier on the PCB.

Specifications:

    power supply: 8 - 14V DC / 1A
    modulation speed: 0.5 - 5s
    frequency: 300 - 6000Hz
    output power: +/- 2W max.
    dimensions: 3.14 x 2.16 x 0.6"
    recommended transformer: - (K2604)
Read More
  Kit - Basic Soldering Required  
  K2604  
  2  
Quantity:  

9V Siren
Click here for specs, downloads and more pictures.
A surprisingly loud siren for such a simple circuit. Uses voltage controlled oscillator. 0.5 Watt, 8 ohm speaker supplied. 9V operation. Ideal to attach to an alarm system which needs an sound module.(CPS31)
Read More
  Kit - Basic Soldering Required  
  CPS31  
  3  
Quantity:  

FK228: MINI SIREN
Click here for specs, downloads, and more pictures!
Specifications:
  • It comes with a 2 inch 0.25 W. Speaker
  • It is easy application and low cost. It is suitable for installing in playing car.
  • Power supply : 9 – 12 VDC.
  • Recommended housing : FB18
  • PCB dimensions : 1.8" X 1.4"
Read More
  Kit - Basic Soldering Required  
  FK228  
  8  
Quantity:  

Results 1-45 of 8912